Pelco C1459M-B (2/03) - Manual
Pelco C1459M-B (2/03) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; There are two methods of installation for the metal ceiling panel.; REPLACEMENT INSTALLATION; Remove the ceiling tile from the ceiling.; T-Rail Clip Installation
- Page 3 – REINFORCEMENT INSTALLATION; T-Bracket and Clip Installation
- Page 4 – REVISION HISTORY; WARRANTY AND RETURN INFORMATION
SD5-P
Metal Ceiling Panel
C1459M-B (2/03)
®
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.
Installation and servicing should be done only by qualified service personnel and
conform to all local codes.
2.
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P
enclosure, it is designed for indoor use only and it must not be installed where
exposed to rain and moisture.
3.
The installation method and materials should be capable of supporting four times
the weight of the unit and equipment.
4.
Only use replacement parts recommended by Pelco.
DESCRIPTION
The SD5-P metal ceiling panel is designed for use with Spectra Series in-ceiling back box and DF5 in-ceiling fixed-mount domes. The metal ceiling
panel can be used to replace or reinforce the 2' x 2' ceiling tile in suspended ceiling installations.
The following parts are supplied:
Qty.
Description
1
2’ x 2’ metal panel
4
T-rail clip
Pelco World Headquarters • 3500 Pelco Way • Clovis, California 93612 USA •
www.pelco.com
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INSTALLATION There are two methods of installation for the metal ceiling panel. Replacement Installation – Remove existing ceiling tile and install the SD5-P metal panel.Reinforcement Installation – Install the SD5-P to strengthen the existing ceiling tile. Select the method of installation, and the...
REINFORCEMENT INSTALLATION 1. Remove the ceiling tile from the ceiling. 2. Prepare the ceiling tile for installation. Use the metal panel as a template. Place the metal panel on top of the ceiling tile, and draw an outlineof the center circle. Cut the circle out of the ceiling tile. 3. Remove the co...
REVISION HISTORY Manual # Date Comments C1459M 3/97 Original version. C1459M-A 2/98 Revised to include usage with DFSS Series shortened back box. C1459M-B 2/03 Revised to include Spectra III SE and Spectra III back box models. Updated manual to new format. ® Pelco, the Pelco logo, Spectra, Genex, Es...
