Pelco C1445M-E (2/09) - Manual
Pelco C1445M-E (2/09) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Important Safety Instructions
- Page 5 – ENCLOSURE DISASSEMBLY
- Page 6 – Pressure Sensor Installation
- Page 8 – Enclosure Reassembly and Recharging; REASSEMBLY; RECHARGING; POWER CONNECTION
- Page 11 – PRODUCT WARRANTY AND RETURN INFORMATION
I N S T A L L A T I O N
C1445M-E (2/09)
For EH8100 Series
Pressurized Camera Enclosure
PSKIT8100
Pressure Sensor Option
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 C1445M-E (2/09) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply ...
C1445M-E (2/09) 5 Description The PSKIT8100 pressure sensor is designed for use with the EH8100 Series enclosure. The sensor ensures that enclosure pressure stays at an acceptable operation level. The PSKIT8100 provides contact closure when the internal pressure of the enclosure falls below the requ...
6 C1445M-E (2/09) Pressure Sensor Installation To install the pressure sensor: 1. Remove the screw located inside the top portion of the enclosure’s rear plate (refer to Figure 2). Insert the pressure sensor tube fitting into the hole. 2. Loosen the camera sled mounting screws (refer to Figure 2). S...
