Pelco C1095M - Manual
Pelco C1095M – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
PELCO Manual C1095M — 4/94
1
INSTALLATION MANUAL
ICIDRD INTERFACE CABLE
FOR INTER-CHECK P.O.S. SYSTEMS
1.0 SCOPE
This manual covers the interface for the ICIDRD
interface cable for the Wayne Dresser Plus 1, Plus 2,
and Plus 3 registers.
The following should be noted prior to installation:
1.
This PELCO P.O.S. interface utilizes the
display port
of the Wayne Dresser register.
WARNING:
This interface
is not
a printer
connection. Plugging this interface
into the printer port
will damage
the interface.
2.0 INSTALLATION
2.1 LOCATING THE CASH REGISTER
DISPLAY CONNECTION
1.
Locate the port labeled
DISPLAY
at the rear of
the register.
2.
If the display port is not labeled, follow the
cable from the customer display back to the
register. The connector you need to locate will
be a 9-pin D-SUB variety.
3.
After locating this connector, unplug from the
cash register.
4.
Plug PELCO's display interface directly into
the register display port.
5.
Plug the register display cable back into the
PELCO interface.
6.
Refer to Figure 1 or Figure 2 for the proper
wiring configuration to your Inter-Check unit.
7.
Make sure all connections are tight.
8.
Check register and display for proper opera-
tion.
2.2 INTER-CHECK UNIT PROGRAMMING
1.
Enter the
MAIN MENU
by pressing
[ENTER]
in the monitoring mode.
2.
Inter-Check 1000S users press
[1]
(CHAN-
NEL SETUP).
Inter-Check 2000D users press
[1]
or
[2]
de-
pending on the channel you are using for data
display.
3.
Press
[2]
in the
CHANNEL MENU
(DATA
FORMAT/COMMUNICATION PROTO-
COL).
4.
Press
[ENTER]
or the arrow keys on your
keyboard/keypad until you reach
RS232
STANDARD PRINTER
.
5.
Press
[ESC]
to save this selection.
6.
Program the Communication Setup values
according to Table I. Consult your Inter-Check
manual for pertinent programming informa-
tion.
7.
Press
[ESC]
to return to monitoring mode and
test for proper operation.
®
C1095M
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
