Pelco BK4024 - Manual
Pelco BK4024 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 1. Blower Kit Installation; Wire according to the wiring diagram in Figure 2.; NOTE; Item
- Page 3 – Figure 2. Blower Kit Wiring Diagram; Quantity; Resistor for fan, 3K ohm
- Page 4 – (Product specifications subject to change
®
1.0 WARNINGS
Prior to installation and use of this product, the following
WARNINGS should be observed.
1.
Installation and servicing should only be done by
Qualified Service Personnel and conform to all
Local codes.
2.
Unless the unit is specifically marked as a NEMA
Type 3-6P enclosure, it is designed for Indoor use
only and it must not be installed where exposed to
rain and moisture.
4.
Only use replacement parts recommended by
PELCO.
PELCO • 300 W. Pontiac Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981
FAX (800) 289-9150 or (1-559) 292-3827 • DataFAX (800) 289-9108 or (1-559) 292-0435
2.0 SCOPE
The information contained within this manual covers
the installation and operation of the BK4000/BK4024/
BK4220 Blower Kits. Please familiarize yourself with
the information in this manual prior to installation and
operation.
2.1 DESCRIPTION
The BK4000/BK4024/BK4220 Blower Kits are engi-
neered for installation in the EH4014 and EH4018 En-
closures. The BK4000 requires 120 VAC, the BK4024
requires 24 VAC, and the BK4220 requires 230 VAC.
All units can be used in conjunction with the corre-
sponding Heater Kit.
BK4000 requires 4 watts at 120 VAC, 60 Hz.
BK4024 requires 3 watts at 24 VAC, 60 Hz. (CE)
BK4220 requires 4.8 watts at 230 VAC, 60Hz. (CE)
NOTE
: Once installed, the blower kit will reduce
the maximum camera/lens length specified by 1-
3/4 inches.
= Vertical bar in left or right margin indicates change or addition.
BK4000/BK4024/BK4220 Series
Blower Kit
Installation/Operation
Manual C436M-B (12/94)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 PELCO Manual C436M-B (12/94) 3.0 INSTALLATION The BK4000/BK4024/BK4220 Blower Kits are sup-plied with the following installation parts: QTY ITEM 1 Blower 1 Blower Bracket To install the BK4000/BK4024/BK4220 perform thefollowing steps (refer to Figure 1): Figure 1. Blower Kit Installation 1. Remove...
PELCO Manual C436M-B (12/94) 3 Figure 2. Blower Kit Wiring Diagram Input, AC HighInput, AC (neutral)Ground Fan Heater 123456789 10 120 VAC Model Input, AC HighInput, AC (neutral)Ground Heater 123456789 10 Diode Bridge 24 VAC Model 230 VAC Model Input, AC HighInput, AC (neutral)Ground Fan 123456789 1...
4 PELCO Manual C436M-B (12/94) 5.0 WARRANTY AND RETURN INFORMATION WARRANTY PELCO will repair or replace, without charge, anym e r c h a n d i s e p r o v e d d e f e c t i v e i n m a t e r i a l o rworkmanship for a period of one year after the date ofshipment (six months on all pan and tilts with...
