Pelco 207 - Manual
Pelco 207 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
C1002RN (1/09)
Page 1 of 4
Axis IP Cameras Supported on Digital Sentry
Integral Digital Sentry
®
digital video management systems (DVMS) support certain
Axis
®
IP camera models. The camera models listed in this document can be used with
Digital Sentry IP camera driver 6.8.0.126 and later. Refer to each camera’s
table for information about the hardware and software features validated for use on a
Digital Sentry system. Any general limitations or special instructions are listed at the
beginning of the document, and any model-specific information is listed after each table.
For information about the general usage of each camera, refer to the camera
manufacturer’s documentation.
A single AXIS driver in DSAdmin controls all supported AXIS cameras.
To obtain the latest IP camera driver or documentation for use with Digital Sentry, refer
to the Pelco Web site at
www.pelco.com
.
AXIS 206, AXIS 207, AXIS 207W
Firmware
N/A
Supported Resolutions
640 x 480 maximum
Frames per Second (FPS)
1 to 30
Number of Quality Settings
10
Supported Codec
MJPEG
Supported Motion Detection Integral, In-Camera
Pan/Tilt/Zoom (PTZ)
Not available
Release Notes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
