Pelco 06) - Manual
Pelco 06) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Introduction; PARTS AND TOOLS; QTY Description
- Page 4 – Getting Started
- Page 6 – Preparing the Unit to Install the Drive
- Page 7 – Replacing the Hard Disk
- Page 9 – To format a hard disk drive
Hard Disk Drive
Replacement Instructions
C2616M (6/06)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
C2616M (6/06) 3 Introduction This manual provides instructions for replacing the primary master or secondary slave hard disk drive in a DX4000 Series DVR (digital video recorder). PARTS AND TOOLS NOTE: This replacement kit includes a Pelco-certified hard disk drive (160 GB or 250 GB). Using any othe...
4 C2616M (6/06) Getting Started 1. Familiarize yourself with the instructions throughout this manual. 2. Check that you have all the necessary parts and tools. Refer to Parts and Tools on page 3. 3. If possible, back up all essential video before you install a new hard disk drive. If your unit conta...
6 C2616M (6/06) Preparing the Unit to Install the Drive 1. Turn off power to the DX4000, and then remove the power cord from the unit. 2. Remove the top cover of the DVR (refer to Figure 4). a. Remove all nine screws from the DVR — three screws on each side and three on the top. Set aside the screws...
