Patton EHA3201 - Manual
Patton EHA3201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Limited Power Source; WARNING
- Page 3 – See; figure 1; for the EHA3201 unit’s bottom panel arrangements.; • Wear an ESD-preventive wrist strap, ensuring that it makes good
- Page 4 – Connecting the Twisted-Pair Line Interface; shows the signal/pin relationships on this interface. You may
- Page 5 – Connecting the power cable; UI
- Page 6 – figure 5; Connect the EHA3201 to a power source to turn on the unit.; Connecting the EHA3201 to the local IP network; Connect to
- Page 7 – Configuring applications; Bridged Applications; Additional Information
- Page 8 – B.0 EHA Case Specifications; B.1 Power Requirements; Note; For Model 3201 unit specifications, refer to the
- Page 9 – C.0 Compliance Information
- Page 10 – Industry Canada Notice
- Page 11 – C.5 EC Declaration of Conformity; The signed Declaration of Conformity can be downloaded from; C.6 Authorized European Representative
- Page 12 – The term
- Page 13 – IMPORTANT
Model EHA3201
EnviroNET
G.SHDSL Router
Quick Start Guide
Important
—This is a Class A device and is intended for use in a light industrial environment. It is not
intended nor approved for use in an industrial or residential environment.
Part Number: 07MEHA3201-QS, Rev. B
Revised: July 21, 2011
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 EHA3201 Quick Start Guide • Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. • For devices with an external power adapter, the power ada...
EHA3201 Quick Start Guide 3 1.0 Installing the EHA3201 To install the EHA3201, follow these steps: 1. Make a ground connection for the unit (refer to section 1.1, “Grounding the EHA3201” on page 4). 2. Connect the line interface between the units (refer to section 1.2, “Connecting the Twisted-Pair L...
4 EHA3201 Quick Start Guide 1.1 Grounding the EHA3201 Before installing the EnviroNET G.SHDSL Router, it is important to establish a good grounding connection first. 1. Assemble a ground wire using #10 AWG wire with green-and-yellow-colored insulation and two ring ter-minals. Make the wire long enou...
