Patton BODi rS BD1000 - Manual
Patton BODi rS BD1000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – B.0 Compliance Information; EMC; B.2 CE Declaration of Conformity; WARNING
- Page 3 – Preparing to Install the BODi rS; You will need the following to install your BODi rS:; • Wear an ESD-preventive wrist strap, ensuring that it makes good; CAUTION; A.0 Customer and Technical Support; with a VoIP SIP client
- Page 4 – Figure 1; Connecting to the Web Admin Interface; admin; BODi rS BD1000 Series User Manual:; Connecting the BODi rS Interfaces; Note; Installing the LAN Interface Cable
BODi rS BD1000 Series
Bandwidth-on-Demand Internet
Network Appliance
Quick Start Guide
This is a Class A device and is not intended for use in a residential environment.
Part Number: 07MBD1000-QS, Rev. A
Revised: November 28, 2012
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
8
BODi rS BD1000 Quick Start Guide
Copyright statement
Copyright © 2012, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no
liability for errors that may appear in this document.
Trademarks statement
The term
BODi rS
is a trademark of Patton Electronics Company. All other trademarks presented in this document
are the property of their respective owners.
Warranty, Trademark, & Compliance Information
For warranty, trademark and compliance information, refer to the user manual for your BODi rS model,
avail-
able online at
www.patton.com/manuals.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
BODi rS BD1000 Quick Start Guide 7 B.0 Compliance Information B.1 Compliance EMC • EN55022, Class A • EN55024 Low-Voltage Directive (Safety) • IEC/EN60950-1, 2nd edition B.2 CE Declaration of Conformity Patton Electronics, Inc declares that this device is in compliance with the essential requirement...
BODi rS BD1000 Quick Start Guide 3 1.0 Preparing to Install the BODi rS You will need the following to install your BODi rS: • At least one Internet/WAN access account • For each network connection, one 10/100Base-T UTP cable with RJ45 connector, or one 1000Base-T Cat5E UTP cable for the Gigabit por...
BODi rS BD1000 Quick Start Guide 5 1. Connect one end of the USB cable to one of the USB ports. 2. If you are installing a 3G/4G failover modem, connect the other end of the cable to the modem. Other-wise, connect the other end of the cable to a USB 2.0 device. 3. If there is a second cellular modem...
