Patton 460RC - Manual
Patton 460RC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – GENERAL INFORMATION
- Page 3 – Figure 2. Possible Positions for Model 460RC/F Jumpers; * Indicates default setting
- Page 4 – Figure 3. Fully Populated Model 460RC16 Rack Chassis
- Page 5 – Figure 4. Mounting a Model 460RC/F Module to the Rack; Spacer
- Page 7 – APPENDIX D; Patton Electronics Company; APPENDIX C; PATTON ELECTRONICS MODEL 460RC/F
USER
MANUAL
MODEL 460RC
Rack-Mounted G.703 Coax to
Twisted Pair
Adapters (BALUNs)
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com
Part # 07M460RC-A
Doc. #019081UA
Revised 3/13/98
An ISO-9001
Certified Company
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 460RC components to be free from defects, and will—at our option—repair or replace the productshould it fail within one year from the first date of shipment. Thiswarranty is limited to defects in workmanship or materials, and does notcov...
3.1.1 Jumper Straps JP1, JP2, JP3, JP4, and JP7 The jumper straps allow you to set shielding and grounding options for the Model 460RC/F. The settings for each jumper strap are shownbriefly in the table below. Following this table are more detailedexplanations of each jumper. Jumper JP1: 75 Ohm TX S...
Jumper JP3: 75 Ohm RX Shield to 120 Ohm Overall Shield In the default “Connected” setting, the 75 Ohm receive in coaxial shield connects to RJ-45 pin 6, the receive pair shield. JP3 Setting Description Position 1 & 2 Connected 75 Ohm RX shield connected to the RJ-45 overall foil shield Position ...
