Patton 2620 - Manual
Patton 2620 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Power up the router; Models with external AC adaptor; • The IPLink 2603/2620 contains no user serviceable parts. The equip-; WARNING
- Page 3 – Models with internal DC power supply; Configure the IP address; Connecting a PC and logging in; Connecting IPLink to the PC’s serial port; superuser; Connect to Console port
- Page 4 – Modifying the IP address; The above IP address (; Connect to the local IP network; figure 2; Note; Connecting the IPLink to the local IP network (Model 2603/K shown)
- Page 5 – from; Log onto the web management interface; “Modifying the IP address”; Log in to the web management home page using the username; IPLink web management home page; “Complete the installation”; Connect the WAN port
- Page 6 – Connecting to the RJ-48C WAN port; Complete the installation
- Page 7 – B.0 Compliance Information; B.2 EC Declaration of Conformity; The signed Declaration of Conformity can be downloaded from
IPLink™ Model 2603 & 2620
WAN Access Router
Quick Start Guide
Document Number: 03323U7-001 Rev. B
Part Number: 07M2620-QS
Revised: October 4, 2005
Sales Office: +1 (301) 975-1000
Technical Support: +1 (301) 975-1007
E-mail: [email protected]
WWW: www.patton.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 IPLink 2603 & 2620 Quick Start Guide 1.0 Power up the router Your router comes with one of the following power supply options: • External AC adaptor with included power cord • Internal AC power supply • Internal DC power supply—no power accessories are included 1.1 Models with external AC adap...
IPLink 2603 & 2620 Quick Start Guide 3 1.3 Models with internal DC power supply 1. Strip insulation 1/4-inch from the electrical wires that will connect the DC power source to the IPLink. 2. Connect the ground terminal from the power source to the ground terminal on the IPLink. 3. Connect the ne...
4 IPLink 2603 & 2620 Quick Start Guide 2.2 Modifying the IP address 1. Display current IP interface settings for the IPLink Ethernet LAN port. → → → → ip list interfaces <enter> IP Interfaces: ID | Name | IP Address | DHCP | Transport ---|------|----------------|----------|-------------- 1...
