Patton 2135 - Manual

Patton 2135 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 3 – GENERAL INFORMATION; Thank you for your purchase of this Patton Electronics product.; This device is not intended to be con-
Page 4 – Some networking systems do not define network numbers in pack-; Ethernet LAN; Router; PPP OPERATIONAL BACKGROUND; In situations where a routed network requires connectivity to a
Page 5 – Figure 3. Model 2135 Ethernet connector pinout; To Power
Page 6 – LED STATUS MONITORS
Page 7 – APPENDIX A; Figure 5. Front of Model 2135, showing LED Indicators
Page 10 – Patton Electronics Company

Loading the manual

USER
MANUAL

Model 2135
Ethernet Micro-Bridge

SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007

http://www.patton.com

Part# 07M2135-UM
Doc# 08303U2-001,
Rev. B
Revised 10/26/06

An ISO-9001

Certified

Company

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - GENERAL INFORMATION; Thank you for your purchase of this Patton Electronics product.; This device is not intended to be con-

3 2.0 GENERAL INFORMATION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant-ed for One Year parts and labor. If any questions or problems ariseduring installation or use of this product, please do not hesitate to con-...

Page 4 - Some networking systems do not define network numbers in pack-; Ethernet LAN; Router; PPP OPERATIONAL BACKGROUND; In situations where a routed network requires connectivity to a

ated Cisco configuration will set serial interface (s0) to accommodatehalf bridging for the above example. Authentication is optional under PPP. In a point-to-point leased- line link, incoming customer facilities are usually fixed in nature, there-fore authentication is generally not required. If th...

Page 5 - Figure 3. Model 2135 Ethernet connector pinout; To Power

7 2135 10BaseT DTE RJ-45 Pin No. RJ-45 Pin No. 1 (TX+) 1 (TX+) 2 (TX-) 2 (TX-) 3 (RX+) 3 (RX+) 6 (RX-) 6 (RX-) 4.2 CONNECT TO THE DTE INTERFACE The DTE interface is a V.35 DTE (M/34 male connector), designed to plug directly into a DCE interface (See Appendix C V.35 InterfacePin Assignments). 4.3 PO...