Patton 1140RC - Manual

Patton 1140RC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – The Model 1140RC generates and uses radio frequency energy,; NOTE: Packages received without an RMA number will not be
Page 3 – Figure 1. Model 1140RC front card jumper locations; ON; OFF; Switch Set 1
Page 5 – REAR CARD CONFIGURATION; Figure 3. Model 1140RC rear card jumper location; S2 SUMMARY TABLE; Extended Signaling Rate
Page 6 – Figure 4. Orientation of interface card strap; There are no user-serviceable parts in the power
Page 7 – Switching the Power Supply On and Off; it is not necessary for any; NOTE: Please refer to the Model 1000RP Series User Manual; AC; INSTALLING THE MODEL 1140RC INTO THE CHASSIS; gently into the card-edge receptacle of the rear; Figure 6. Model 1140RC interface card options; Any terminal cable connected to the Model 1140RC
Page 8 – LED STATUS MONITORS; Note: The 1140RC is a “hot swappable”; Figure 7. Close up of ST and SMA connections; ST
Page 10 – on fiber side
Page 11 – The Patton Model 1140RC rack system features interchangeable; Description; Entry Module
Page 12 – Copyright ©; MODEL

Loading the manual

USER
MANUAL

MODEL 1140RC

RS-232 Fiber Optic
Rack Card Modem
w/ V.54 & V.52 Diagnostics

SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
http://www.patton.com

Part #07M1140RC-C
Doc #018031UC
Revised 6/6/97

C E R T I F I E D

An ISO-9001

Certified Company

Dear Valued Customer,

Thank you for purchasing Patton Electronics products! We do

appreciate your business. I trust that you find this user manual helpful.

We manufacture one of the widest selections of data

communications products in the world including CSU/DSU's, network
termination units, powered and self-powered short range modems, fiber optic
modems, interface converters, baluns, electronic data switches, data-line surge
protectors, multiplexers, transceivers, hubs, print servers and much more. We
produce these products at our Gaithersburg, MD, USA, facility, and can
custom manufacture products for your unique needs.

We would like to hear from you. Please contact us in any of the

following ways to tell us how you like this product and how we can meet your
product needs today and in the future.

Web:

http://www.patton.com

Sales E-mail:

[email protected]

Support E-mail: [email protected]
Phone - Sales

(301) 975-1000

Phone - Support

(301) 975-1007

Fax:

(301) 869-9293

Mail:

Patton Electronics Company
7622 Rickenbacker Drive
Gaithersburg, MD 20879 USA

We are committed to a quality product at a quality price. Patton

Electronics is BABT and ISO 9001 certified. We meet and exceed the highest
standards in the industry (CE, UL, etc.).

It is our business to serve you. If you are not satisfied with any

aspect of this product or the service provided from Patton Electronics or its
distributors, please let us know.

Thank you.

Burton A.Patton

Vice President

P.S. Please tell us where you purchased this product.

_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - The Model 1140RC generates and uses radio frequency energy,; NOTE: Packages received without an RMA number will not be

1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 1140RC components to be free from defects, and will—at our option—repair or replace the productshould it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not ...

Page 3 - Figure 1. Model 1140RC front card jumper locations; ON; OFF; Switch Set 1

3.0 CONFIGURATION This section describes the location and orientation of the Model 1140RC’s configuration switches and jumpers, and provides detailedinstructions for all possible settings. The Model 1140RC uses a combination of DIP switches and jumpers that allow configuration to an extremely wide r...

Page 5 - REAR CARD CONFIGURATION; Figure 3. Model 1140RC rear card jumper location; S2 SUMMARY TABLE; Extended Signaling Rate

S2-4 and S2-5: RTS/CTS Delay The combined settings for switches S2-4 and S2-5 determine the amount of delay between the time the Model 1140RC “sees” RTS andwhen it sends CTS. Options are no delay, 7 ms and 53 ms. S2-4 S2-5 Setting On On 7 mS Off On 53 mS On Off No delay Off Off No delay S2-8: V.54 L...