Patton 1000RP - Manual
Patton 1000RP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARRANTY INFORMATION; Patton Electronics warrants all Model 1000RP Series; GENERAL INFORMATION
- Page 3 – To avoid shock hazard, do not connect AC
- Page 4 – FRONT PANEL SWITCH
- Page 5 – SERVICE PROCEDURES; PROCEDURE FOR POWER LINE VOLTAGE SETTING:
- Page 6 – APPENDIX A; SPECIFICATIONS
- Page 7 – disconnected; FACTORY REPLACEMENT PARTS
USER
MANUAL
Model 1000RP Series
AC and DC Rack Mount
Power Supplies
SALES OFFICE
(301) 975-1000
TECHNICAL SUPPORT
(301) 975-1007
Part# 07M1000RP-B
Doc# 078011UB
Revised 3/19/96
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 1000RP Series components to be free from defects, and will—at our option—repair orreplace the products should they fail within one year from the first dateof shipment. This warranty is limited to defects in workmanship ormaterials, and d...
Front (Power Supply) Card Installation 1. Make sure the power switch is in the OFF position. 2. Slide the power supply card into the front of the chassis. It should meet the rear card when it's almost all the way into the chassis. 3. Push the front card gently into the multipin connector on therear ...
4.0 OPERATION Once the Model 1000RP Series power supply module is properly installed, you are ready to operate the unit. Figure 3 (below) shows thelocation of the power switch and LED indicators on the AC and DCpower supply module front cards. 4.1 FRONT PANEL SWITCH The power supply on/off switch is...
