Page 3 - monitor uses fuzzy logic intelligence to sense both your
TITLE 3 TITLE INTRODUCTION Thank you for purchasing the Omron Automatic Blood Pressure Monitorand Print-Out with IntelliSense TM , T9P. Although your blood pressure fluctuates throughout the day, no self-adjustment is necessary as the monitor intelligently adjusts to your changing conditions. TheInt...
Page 4 - Caution; Do not use a cellular phone near the unit.
TITLE 4 TITLE NOTES ON SAFETY [ The warning signs and the sample icons shown here are listed for you to use the product safely and correctlyas well as to prevent the risk and the damage to you and others from happening. [ The icons and meanings are as follow. Warning sign Contents Indicates matters ...
Page 6 - Green Marke
TITLE 6 TITLE QUICK REFERENCE GUIDE 1. Avoid eating, smoking, and exercising for at least 30 minutes before taking a measurement. 2. Remove tight-fitting clothing from your upper arm. 3. Sit in a chair with your feet flat on the floor and place your arm on a table so that the cuff is at the same lev...
Page 7 - Slide the battery cover off
TITLE 7 BATTERY INSTALLATION/REPLACEMENT 1. Slide the battery cover off in the direction of the arrow. 2. Install or replace 4 "AA" size batteries so the +(positive) and – (negative) polarities match the polaritiesof the battery compartment as indicated. 3. Replace the battery cover. Notes: ...
Page 9 - To connect the AC adapter
TITLE 9 HOW TO USE THE OPTIONAL AC ADAPTER To avoid potential damage to the monitor, use only the optionalAC adapter specified by Omron distributor. To connect the AC adapter 1. Insert the AC adapter plug into the AC Adapter jack on the back of the main unit. 2. Plug in the AC adapter into the appro...
Page 10 - If the cuff is assembled correctly, the
TITLE 10 TITLE HOW TO APPLY THE ARM CUFF 1. If the cuff is assembled correctly, the hook material will be on the outside ofthe cuff loop and the metal D-ring willnot touch your skin. 2. If the cuff is not assembled, pass the end of the cuff furthest from the tubing through the metal D-ring to form a...
Page 12 - a) All display symbols appear for approximately; Press the START button and remain still.
TITLE 12 TITLE HOW TO TAKE A READING 1. Press the ON/OFF button. a) All display symbols appear for approximately one second. b) When the monitor becomes ready to measure, the Heart Symbol appears on the display. 2. Press the START button and remain still. As the cuff begins to inflate, the monitor a...
Page 13 - START; NOTE: Do not apply more; f you want to stop the measurement,; Instructions for special conditions:
TITLE 13 TITLE HOW TO TAKE A READING START Continue to press button [ If your systolic pressure is known tobe more than 220 mmHg, push andhold the START button until themonitor inflates 30 to 40 mmHghigher than your suspected systolicpressure. NOTE: Do not apply more pressure than necessary. The mon...
Page 14 - oldest set will be deleted to store a new set.; Date and Time of stored readings will be alternately displayed.
TITLE 14 TITLE HOW TO USE THE MEMORY FUNCTION This monitor has a memory capable of storing twenty-eight (28) sets of readings.Every time you complete the measurement, the monitor automatically stores blood pressure and pulse rate. [ Push the button to recall stored readings while the HeartSymbol ( )...
Page 15 - Remove printer cable plug from
TITLE 15 HOW TO CONNECT PRINTER UNIT 1. Remove printer cable plug from around printer unit. 2. Connect printer cable plug cord to the main unit. Arrow ( 8 ) on printer cable plug should face downto main unit. T9P new (6) 7/17/02 6:05 PM Page 15
Page 16 - Open printer cover in the direction
TITLE 16 HOW TO LOAD PRINTER PAPER 1. Open printer cover in the direction indicated by the arrow symbol andremove paper roll from the main unit. 2. Peel off the glued edge of the printing paper included with the unit, and cutthe first 10 cm with a pair of scissors. 3. Press the PAPER FEED button whi...
Page 17 - NOTE; SYS
TITLE 17 HOW TO USE THE PRINTER-UNIT The T9P has the ability to print all the readings stored in memory. NOTE : [ Make sure printer-unit is connected to main unit (see How to Connect Printer-Unit) [ Do not use printer-unit without loading printer paper (see How to Load Printer Paper). Improper use w...
Page 18 - Date; Only the day; Note; Most recent reading
TITLE 18 HOW TO USE THE PRINTER-UNIT The numerical print-out will list all stored readings (maximum of 28readings) starting with the most recent reading to last stored reading: 3-6 mmHg /min D. T. SYS DIA PUL 20 15 113 75 67 23 11 117 69 64 1 15 113 71 63 3 14 110 67 66 5 7 112 66 64 15 7 110 61 64 ...
Page 19 - GRAPH; or
TITLE 19 HOW TO USE THE PRINTER-UNIT 3. Press “ GRAPH ” button to print a graph of all stored readings (stores a maximum of 28 readings). 50 100 150 200 mmHg 3-6 Diastolic Reading Systolic Reading Average systolicreading of storedmeasurements Average diastolic reading of stored measurements Last rea...
Page 20 - TROUBLESHOOTING
TITLE 20 TITLE If you continue to have difficulty obtaining a reading, contact your nearest OMRONrepresentative or dealer. Error Indicator Cause Correction Cuff under-inflated. Movement duringmeasurement. Cuff over-inflated(more than 300 mmHg). Battery voltage is excessively low . T urn monitor off,...
Page 22 - To protect your monitor from damage, please AVOID the following:; Folding the cuff and tubing tightly.
TITLE 22 CARE AND MAINTENANCE To protect your monitor from damage, please AVOID the following: [ Subjecting your monitor and cuff to extreme temperatures,humidity, moisture, and direct sunlight. [ Folding the cuff and tubing tightly. [ Inflating the monitor over 280 mmHg. [ Disassembling the monitor...
Page 23 - Rapid Pressure Release:
TITLE 23 PRINTER UNIT: Power Source: 4 “ AA ” batteries Battery Life: Approximately 300 uses (current data) Paper Usage: Approximately 200 uses for 1 roll (current data) Printer Weight: Approximately 170 g (not including batteries) Printer Dimensions: Approximately 123 mm x 72 mm x 50 mm NOTE: These...
Page 24 - What Causes High Blood Pressure ?; Blood pressure is only classed as high if it doesn; Why is it a Good Thing To Measure Blood Pressure at Home ?
TITLE 24 TITLE ABOUT BLOOD PRESSURE What Causes High Blood Pressure ? Blood pressure is only classed as high if it doesn ’ t go down when you rest. Permanently raised blood pressure can be caused by several factors such ashardening of the arteries, smoking or drinking too much alcohol. It can also b...
Page 25 - Product of OMRON Corporation, Japan; OMRON Healthcare Singapore Pte Ltd
Product of OMRON Corporation, Japan OMRON Healthcare Singapore Pte Ltd 83, Clemenceau Avenue#11-01, UE SquareSingapore 239920 T9P new (6) 7/17/02 6:05 PM Page 25
