Page 2 - TITLE; TABLE OF CONTENTS; Before Using the Monitor
TITLE 2 TITLE TABLE OF CONTENTS Before Using the Monitor Introduction ........................................................................................ 3 Important Safety Notes ....................................................................... 4 Before Taking a Measurement .................
Page 3 - INTRODUCTION; Fill in for future reference; SAVE THESE INSTRUCTIONS
INTRODUCTION 3 Thank you for purchasing the Omron ® HEM-705CP Intellisense ® Automatic Blood Pressure Monitor with Printer Fill in for future reference DATE PURCHASED: ______ SERIAL NUMBER: ________ Staple your purchase receipt here. Your new digital blood pressure monitor uses the oscillometric met...
Page 4 - IMPORTANT SAFETY NOTES
4 IMPORTANT SAFETY NOTES To assure the correct use of the product basic safety measures shouldalways be followed including the precautions listed below: þ Read all information in the instruction book and any other literature included in the box before using the unit. þ Contact your physician for spe...
Page 5 - BEFORE TAKING A MEASUREMENT
BEFORE TAKING A MEASUREMENT 5 To ensure a reliable reading follow these recommendations: 1. Avoid eating, smoking, and exercising for 30 minutes before taking a measurement. Rest for at least 15 minutes before taking the measurement. 2. Stress raises blood pressure. Avoid taking measurements during ...
Page 6 - KNOW YOUR UNIT
TITLE TITLE KNOW YOUR UNIT START Button Paper Feed Pulse Rate Print Graph Date/Time Display Heart Symbol Air Tube Memory Button Systolic Blood Pressure ON/OFF Button Set Date/Time Adjust Date/Time Diastolic Blood Pressure Print All Data Print Current Data/Stop Printing Printer Cover Air Plug (Connec...
Page 7 - BATTERY REPLACEMENT
TITLE TITLE BATTERY INSTALLATION/REPLACEMENT 1. Press the ▼ OPEN indicator on the battery cover and slide the cover off in the direction of the arrow. 2. Install 4 “AA” size batteries so the + (positive) and - (negative) polarities match the polarities of the battery compartment as indicated. 3. Rep...
Page 8 - Remove the printer cord from
TITLE 8 TITLE CONNECTING THE PRINTER 1. Remove the printer cord from around the printer unit. 2. Connect the printer to the blood pressure monitor. Insert the cable plug with the indicator facing upward. CAUTION: Inserting the cable plug in any other position will damage the monitor. HEM-705CP-IM-US...
Page 9 - LOADING THE PRINTER PAPER
9 LOADING THE PRINTER PAPER This printer uses OMRON ® thermal paper, part number 90TRP. Use only this thermal paper or thermal paper of similar size, width 38mm, roll diameter not to exceed 26mm. NOTE: For information on where to purchase printer paper visit our website at www.omronhealthcare.com or...
Page 10 - SETTING THE DATE AND TIME; SETTING THE YEAR
SETTING THE DATE AND TIME 10 The Blood Pressure Monitor automatically stores up to 28 measurement values with the date and time. Set the monitor to the current date and time before taking a measurement for the first time. If the current date and time is not set, a default date and time will display....
Page 11 - SETTING THE MONTH
TITLE SETTING THE DATE AND TIME 11 3. SETTING THE MONTH Press the ADJUST button to advance by increments of one month. Press the SET button to set the current month. The day flashes on the display. 4. SETTING THE DAY Press the ADJUST button to advance by increments of one day. Press the SET button t...
Page 12 - APPLYING THE ARM CUFF; APPLYING THE CUFF ON THE LEFT UPPER ARM
TITLE 12 TITLE TITLE APPLYING THE ARM CUFF 1. Make sure the air plug is securely inserted in the main unit. 2. Remove tight-fitting clothing from your upper arm. 3. Sit in a chair with your feet flat on the floor. Place your arm on a table so the cuff is level with your heart. APPLYING THE CUFF ON T...
Page 14 - TAKING A MEASUREMENT; Press the ON/OFF button; Press the START button
TITLE 14 TITLE TITLE TAKING A MEASUREMENT The monitor automatically determines your ideal inflation level. In rare circumstances when a higher inflation may be necessary, the monitor automatically re-inflates the cuff up to 30mmHg higher than the initial inflation and restarts the measurement. The m...
Page 15 - START
15 TITLE TITLE TITLE TAKING A MEASUREMENT START 4. When the measurement is complete, the arm cuff completely deflates. Your blood pressure and pulse rate are displayed. 5. Press the ON/OFF button to turn the monitor off. NOTE: The monitor will automatically turn off after five minutes. INSTRUCTIONS ...
Page 16 - USING THE MEMORY FUNCTION; TO DELETE ALL VALUES STORED IN THE MEMORY
Every time you complete a measurement the monitor stores the blood pressure and pulse rate in the memory. The Blood Pressure Monitor automatically stores up to 28 measurement values. When 28 sets of measurement values are stored in the memory, the oldest record is deleted to save the most recent mea...
Page 17 - TO PRINT THE MOST RECENT MEASUREMENT VALUES
17 TITLE TITLE USING THE PRINTER The HEM-705CP printer unit has the capability to print all the of measurement values stored in the memory of the Blood Pressure Monitor. NOTES: • The correct date and time must be set up on the monitor before taking a reading. If the date and time is not set, the num...
Page 18 - TO PRINT ALL THE MEASUREMENT VALUES; Date
TITLE 18 TITLE USING THE PRINTER 2. TO PRINT ALL THE MEASUREMENT VALUES Press the ALL DATA button. The numeric printout will list all of the readings stored in the memory starting with the oldest reading to the most recent reading followed by the average of all the stored readings. The stored data w...
Page 19 - TO PRINT A GRAPH OF ALL MEASUREMENT VALUES; The graph will list all of the readings stored
19 TITLE TITLE USING THE PRINTER 3. TO PRINT A GRAPH OF ALL MEASUREMENT VALUES Press the GRAPH button. The graph will list all of the readings stored in the memory. The stored data will print as illustrated in the following example: 50 100 150 200 mmHg 3-6 Diastolic Reading Systolic Reading Average ...
Page 21 - ERROR INDICATORS; SYMBOL; TROUBLESHOOTING TIPS; PROBLEM
21 TITLE TITLE TITLE ERROR INDICATORS SYMBOL CAUSE CORRECTION Monitor did not detect pulse rate Remove the arm cuff. Refer to “Applying the arm cuff” on page 12. Wait 2-3 minutes. Take another measurement. Cuff under-inflated Remove the arm cuff. Read “Taking a Measurement” on page 14. Wait 2-3 minu...
Page 23 - QUICK REFERENCE GUIDE
QUICK REFERENCE GUIDE To ensure a reliable reading, avoid eating, smoking, and exercising for 30 minutes before taking a measurement. You should try to measure your blood pressure at the same time each day. Avoid taking measurements during stressful times. 1. Remove any tight-fitting clothing from y...
Page 25 - FCC STATEMENT
25 TITLE TITLE TITLE FCC STATEMENT Note: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable protection against...
