Page 2 - Care and Maintenance; TABLE OF CONTENTS
2 Before Using the Monitor Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Operating the Device . . . . . . . . . . . . ....
Page 3 - INTRODUCTION; Fill in for future reference.; SAVE THESE INSTRUCTIONS; Before Using the Monitor
3 Thank you for purchasing the Omron ® Elite 7300W IntelliSense ® Women’s Advanced Automatic Blood Pressure Monitor. INTRODUCTION Fill in for future reference. DATE PURCHASED: __________________ SERIAL NUMBER: ____________________ Staple your purchase receipt here Your new digital blood pressure mon...
Page 4 - OPERATING THE DEVICE; SAFETY INFORMATION
4 To assure the correct use of the product basic safety measures shouldalways be followed including the warnings and cautions listed in thisinstruction manual. WARNING Indicates a potentially hazardous situationwhich, if not avoided, could result in death orserious injury. SAFETY SYMBOLS USED IN THI...
Page 6 - CARE AND MAINTENANCE; Do not submerge the device or any of the components in water.
CARE AND MAINTENANCE Do not subject the monitor to strong shocks, such as dropping the uniton the floor. Do not submerge the device or any of the components in water. Store the device and the components in a clean, safe location. Changes or modif ication not approved by Omron Healthcare will voidthe...
Page 7 - BEFORE TAKING A MEASUREMENT
7 BEFORE TAKING A MEASUREMENT To ensure a reliable reading follow these recommendations: 1. Avoid eating, drinking alcohol, smoking, exercising, and bathing for 30 minutes before taking a measurement. Rest for at least 15 minutesbefore taking the measurement. 2. Stress raises blood pressure. Avoid t...
Page 8 - KNOW YOUR UNIT; Operating Instructions; Battery Compartment
8 KNOW YOUR UNIT Main Unit: Operating Instructions Battery Compartment Memory Button ( ) Display Date/Time SettingButton ( ) Air Jack Start/Stop Button HEM-7300 e-s r2.qxd 11/2/07 4:50 PM Page 8
Page 9 - Arm Cuffs
KNOW YOUR UNIT 9 Components: Arm Cuffs Air Tube Air Plug (Connects to Air Jack) Stylish Zipper Case Four “AAA” Batteries Instruction Manual Women’s Advanced Automatic Blood Pressure Monitor with Two Cuffs Model Elite 7300W INSTRUCTION MANUAL ESP AÑOL ENGLISH Quick Guide Thank you for purchasing the ...
Page 10 - UNIT DISPLAY
10 UNIT DISPLAY Movement Error Symbol Low Battery Indicator Deflation Symbol Heartbeat Symbol/Hypertension Indicator Irregular Heartbeat Symbol Average Value Symbol Memory Symbol Pulse Display Medication Symbol Date/Time Display Guest Symbol Systolic Blood Pressure Diastolic Blood Pressure HEM-7300 ...
Page 11 - IRREGULAR HEARTBEAT SYMBOL; display with the measurement values.; MOVEMENT ERROR SYMBOL; The Movement Error Symbol; DISPLAY SYMBOLS
11 IRREGULAR HEARTBEAT SYMBOL ( ) When the monitor detects an irregular rhythm two or more times duringthe measurement, the Irregular Heartbeat Symbol ( ) will appear on the display with the measurement values. An irregular heartbeat rhythm is def ined asa rhythm that is more than 25% slower or25% f...
Page 12 - HEARTBEAT SYMBOL/HYPERTENSION INDICATOR; TAKING A MEASUREMENT; AVERAGE VALUE SYMBOL
HEARTBEAT SYMBOL/HYPERTENSION INDICATOR ( ) TAKING A MEASUREMENT The Heartbeat Symbol ( ) flashes on the display during the measurement. The Heartbeat Symbol ( ) flashes at every heartbeat. When the measurement is complete, the Heartbeat Symbol ( ) flashes on the display with your blood pressure and...
Page 13 - AHA Home Guideline for Upper Limit of Normal BP; Systolic Blood Pressure; WARNING; ) flashes on the display with your measurement
The American Heart Association recommends the following guideline forupper limit of normal for home blood pressure readings: AHA Home Guideline for Upper Limit of Normal BP Systolic Blood Pressure 135 mmHg Diastolic Blood Pressure 85 mmHg This is a general guideline because blood pressure depends on...
Page 14 - BATTERY INSTALLATION
1. Press the t indicator on the battery cover and slide the cover off in the direction ofthe arrow. 2. Install 4 “AAA” size batteries so the + (positive) and – (negative) polarities matchthe polarities of the battery compartment asindicated. 3. Replace the battery cover. BATTERY INSTALLATION 14 Batt...
Page 15 - • Turn the unit off before replacing the batteries. If the batteries; CAUTION; Low Battery Indicator
BATTERY REPLACEMENT When the Low Battery Indicator appears on the display screen, turn themonitor off and remove all the batteries. Replace with four new batteriesat the same time. WARNING If battery fluid should get in your eyes, immediately rinse with plentyof clean water. Contact a physician imme...
Page 16 - TO START THE SETTING; The year flashes on the display.; SETTING THE DATE AND TIME
16 Set the monitor to the current date and time before taking a measurementfor the f irst time. If the date and time are not set correctly, themeasurement values stored in the memory and the average values maynot be correct. The Blood Pressure Monitor automatically stores up to 84 individualmeasurem...
Page 18 - SETTING THE MINUTE
18 4. SETTING THE DAY Press the Memory button ( ) to advance by increments of one day. Press the Date/Time Setting button ( ) to set the current day. The hour flashes on the display. 5. SETTING THE HOUR The time is set using AM or PM. Press the Memory button ( ) to advance by increments of one hour....
Page 19 - RESETTING THE DATE AND TIME; Start with the monitor in the off position.; or; The Medication Symbol (; or; oFF
RESETTING THE DATE AND TIME To adjust the date or time after it has been setup when you f irst use the unit. Start with the monitor in the off position. 1. Press and hold the Date/Time Setting button ( ). The Medication Symbol ( ) No.1 and the current setting ( on or oFF ) will appear on the display...
Page 22 - SETTING THE MINUTE; Press the Memory button (; setting appears on the display.; SETTING THE MEDICATION REMINDER ALARM 2
4. SETTING THE MINUTE Press the Memory button ( ) to advance by increments of one minute. Press the Date/Time Setting button ( ) to set the minute. The Medication Symbol ( ) No.2 and the oFF setting appears on the display. 5. SETTING THE MEDICATION REMINDER ALARM 2 Repeat steps from 2 to 4 to set th...
Page 23 - TO TURN THE MONITOR OFF
6. TO TURN THE MONITOR OFF If the date and time are correct, press the START/STOP button to turnthe monitor off. To change the date and time refer to “Resetting the Date and Time” onpage 19. S SE ET TT TIIN NG G T TH HE E M ME ED DIIC CA AT TIIO ON N R RE EM MIIN ND DE ER R A AL LA AR RM M 23 HEM-73...
Page 24 - USE CUFF GUIDE TO CHOOSE THE RIGHT CUFF; APPLYING THE ARM CUFF
CAUTION Read all of the information in the instruction manual and any otherliterature in the box before operating the unit. CAUTION This device is intended for use in measuring blood pressure and pulserate in the adult population. Do not use this device on infants orpersons who cannot express their ...
Page 25 - APPLYING THE CUFF ON THE LEFT ARM; Make sure the air plug is securely inserted in the main unit.
2. Fit the looped Cuff Guide on your upper arm. 3. Cuff Guide shows your correct cuff. Use the cuff with same colored sticker. APPLYING THE CUFF ON THE LEFT ARM 1. Make sure the air plug is securely inserted in the main unit. APPLYING THE ARM CUFF 25 Use the Standard Cuff Orange Purple Use the Large...
Page 27 - APPLYING THE CUFF ON THE RIGHT ARM
27 APPLYING THE ARM CUFF APPLYING THE CUFF ON THE RIGHT ARM When taking a measurement using the right arm use this instruction for Step 3 on page 26. Apply the cuff to your right upper arm so the blue arrow and the air tuberuns along the inside of your elbow. The bottom of the cuff should beapproxim...
Page 30 - USING THE GUEST MODE; Press and hold the START/STOP button for 3
USING THE GUEST MODE The monitor is designed to take measurements and store themeasurement values in the memory for one person. The monitor can alsobe used to take a single measurement for other persons using the GUESTMode. Measurements taken using the Guest Mode are not stored in thememory. 1. Pres...
Page 31 - ) appears on the display when the average; USING THE MEMORY FUNCTION
Every time you complete a measurement the monitor stores the bloodpressure and pulse rate in the memory. The monitor automatically stores up to 84 sets of measurement values(blood pressure and pulse rate). When 84 sets of measurement values arestored, the oldest record is deleted to save the most re...
Page 33 - TO DELETE ALL VALUES STORED IN THE MEMORY; You cannot partially delete values stored in the memory.
TO DELETE ALL VALUES STORED IN THE MEMORY You cannot partially delete values stored in the memory. 1. Press the Memory button ( ) to turn the monitor on. 2. Press the Memory button ( ) again. While holding it down, pressthe START/STOP buttontogether for more than 5seconds. 3. Press the START/STOP bu...
Page 34 - Do not forcefully bend; the arm cuff or air tube. Do not fold tightly.; Clean the monitor with a soft dry cloth.; Do not use any abrasive; Store the device and the components in a clean, safe location.; if the unit will not be used for three months or; CARE AND MAINTENANCE
34 To keep your digital blood pressure monitor in the best condition andprotect the unit from damage, follow the directions listed below: Keep the monitor in the Stylish ZipperCase when not in use. Do not forcefully bend the arm cuff or air tube. Do not fold tightly. Clean the monitor with a soft dr...
Page 36 - Batteries are worn; ERROR INDICATORS; ERROR INDICATORS AND TROUBLESHOOTING TIPS
Contact your OMRONdistributor or Customer Servicesas mentioned on the package. A malfunction hasoccured. 36 SYMBOL CAUSE CORRECTION Remove the arm cuff. Read,“Taking a Measurement”. Take another measurement. Cuff over-inflated Take another measurement andremain still until themeasurement is complete...
Page 37 - PROBLEM; No display appears on the unit.; TROUBLESHOOTING TIPS
37 ERROR INDICATORS AND TROUBLESHOOTING TIPS PROBLEM CAUSES AND SOLUTIONS No power. No display appears on the unit. Replace all four batteries with newones.Check the battery installation for proper placement of the battery polarities. Measurement values appeartoo high or too low. Blood pressure vari...
Page 38 - FCC STATEMENT
38 FCC STATEMENT NOTE: POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only) This product has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmfulinterfere...
Page 39 - WARRANTY; FOR CUSTOMER SERVICE
WARRANTY 39 Your Omron ® Elite 7300W IntelliSense ® Women’s Advanced Automatic Blood Pressure Monitor, excluding the arm cuffs, is warranted to be free from defects inmaterials and workmanship appearing within 5 years from the date of purchase,when used in accordance with the instructions provided w...
Page 40 - SPECIFICATIONS
40 Model: Elite 7300W Display: LCD Digital Display Measurement Range: Pressure: 0 to 299 mmHg, Pulse: 40 to 180/min. Accuracy/Calibration: Pressure: ±3mmHg or 2% of readingPulse: ±5% of reading Inflation: Automatic by electric pump Deflation: Automatic rapid deflation pressure Rapid Air Release: Aut...
Page 41 - These specifications are subject to change without notice.
Memory: Up to 84 readings Contents: Main Unit, Standard and Large Arm Cuffs, Instruction Manual, 4 “AAA” batteries, Stylish Zipper Case, Quick Guide, Warranty Card andCuff Guide UPC Code: 0 73796 73000 0 NOTE: These specifications are subject to change without notice. SPECIFICATIONS 41 HEM-7300 e-s ...
