Oki ES3640 MFP - Manual
Oki ES3640 MFP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Selecting a printer driver; NOTE
- Page 3 – Assign an IP address to the MFP
- Page 4 – Install Printer Utilities; • Network Software
- Page 5 – Install the EFI Fiery Utilities; > Command WorkStation; Activating Options
- Page 6 – Install
- Page 7 – Install the Utility; Install the MFP on a Novell
- Page 8 – Install the Driver
- Page 10 – Install the Driver and Utilities
- Page 11 – Install the User Documentation
1
ES3640e MFP Software Installation Guide
About this Guide
This guide describes the initial printer driver
installation. For more detailed information, refer to
the
EFI
User Software Installation Guide
and
EFI
Configuration Guide
provided on the User
Documentation CD (CD3).
The general steps for installing the software are as
follows:
• Install the PostScript or PCL printer driver and
corresponding printer driver files.
• Set up the printer driver to communicate with
the Fiery.
• Install Fiery utilities and user software.
• Configure Fiery utilities and user software.
You must also configure either a local connection
for printing directly to your printer or a network
connection for printing over a network.
Service and Support
• Consult the dealer where you purchased your
system.
• Visit our web site:
http://my.okidata.com
NOTE
A full set of user documentation, where
procedures are described in detail, is provided on
the User Documentation CD (CD3).
Windows
®
TCP/IP Network Installation ..... 2
Novell Installation ...................................... 7
Macintosh
®
Installation .............................. 8
OS 9.1 to 9.2.x ....................................... 8
OS X.1+ to X.3+ ................................... 10
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Windows TCP/IP Network Installation Selecting a printer driver Select a driver appropriate for your application. Fiery PostScript printer driver Use this driver for high-resolution color graphics applications and pre-press graphic proofing. This driver also includes advanced features which may onl...
3 Windows TCP/IP Network Installation (cont’d) 1 Assign an IP address to the MFP If you are not using DHCP, you need to obtain an IP Address from your network Administrator and enter it using the front panel: 1. Confirm that the printer displays [ Ready to print ]. 2. Press ∇ key until [ Admin Setup...
4 Windows TCP/IP Network Installation (cont’d) 2 Install the Fiery PostScript Printer Driver 1. Insert the printer driver CD (CD1) into your CD-ROM drive. The CD will autorun. If it doesn’t autorun, click Start → Run → Browse . Browse to your CD-ROM drive. Double-click Install . exe . Click OK . 2. ...
