Nortel 100 Series - Manual
Nortel 100 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ii; Trademarks
- Page 3 – Introduction; BayStack
- Page 4 – Package Contents; Upgrade Instructions for the BayStack 100-series; Required Tools; If the hub is installed in a rack, remove it.
- Page 5 – Disengaging the NMM from the hub; Slide the NMM out of the expansion slot.; Accessing the NMM Baseboard; Figure 2; DCM attachment screws on a BayStack 100-series NMM
- Page 6 – Removing and Replacing the PROM; To replace the PROM on the NMM baseboard, follow these steps:; Find the PROM in location U2 on the NMM baseboard (see; PROM location on the NMM baseboard; The PROM socket may not always be in the same orientation to the
- Page 7 – Be careful that the extraction tool you use does not bend or put
- Page 8 – Replacing an NMM in a BayStack Hub; To replace an NMM in a BayStack 100-series NMM, follow these steps:; Figure 4; Installing the NMM into the expansion slot; For BayStack products that do not have power switches, the power
Part No. 893-00978-A
November 1996
4401 Great America Parkway
Santa Clara, CA 95054
8 Federal Street
Billerica, MA 01821
*893-00978-A*
Upgrade Instructions for
the BayStack 100-series
Version D Boot Firmware
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
ii 893-00978-A 4401 Great America Parkway 8 Federal Street Santa Clara, CA 95054 Billerica, MA 01821 © 1996 by Bay Networks, Inc. All rights reserved. Trademarks Bay Networks, BayStack, and SmartSwap are trademarks of Bay Networks, Inc. Other brand and product names are registered trademarks or trad...
893-00978-A 1 Introduction This document outlines the procedure for upgrading the boot firmware for the Bay Networks ™ BayStack ™ 100-series network management module (NMM). If you are using the version 1.5 agent for the BayStack 100-series NMM, revision D boot firmware is necessary to enable the fo...
Upgrade Instructions for the BayStack 100-series Version D Boot Firmware 2 893-00978-A Package Contents The BayStack 100-series NMM Version D Boot Firmware upgrade kit contains the following components: • A boot PROM for the type of NMM you have: – Bay Networks part number CG1011003 for Basic NMMs –...
