Nilfisk ALTO MP8 - Manual - manualsarea.com

Page 2 - SAFETY RELATED SYMBOLS; C A U T I O N; Protective Ground Terminal; WARNING; Protective Ground

SAFETY RELATED SYMBOLS C A U T I O N R I S K O F E L E C T R I C S H O C K D O N O T O P E N This symbol, wherever used, alerts you to the pre-sence of un-insulated and dangerous voltages with-in the product enclosure. These are voltages thatmay be sufficient to constitute the risk of electricshock ...

Page 3 - PREFACE

2 PREFACE PREFACE Thank you for choosing MP8 Eight Channel Microphone/Instrument Pre-amplifier and thanks for choosing one LTO of the results of LTO AUDIO TEAM job and research. For our LTO AUDIO TEAM, music and sound are more than a job...is first of all passion and let us say our obsession! We hav...

Page 4 - TABLE OF CONTENTS

TABLE OF CONTENTS 1. INTRODUC ION T ..................................................................................................................................................4 2. FEATURES............................................................................................................

Page 5 - CONTROL ELEMENTS; Input Gain Control Knob (from channel 1 to channel 8); Power for condenser microphone .; High Pass Filter Switch (from channel 1 to channel 8)

1. INTRODUCTION MP8 eight channels microphone/ instrument preamplifier has been designed and constructed using advanced technologyto provide its user crystalline audio reproduction for an infinite period of time, which is ideal for professional recordingapplications and sound installs. These first 2...

Page 6 - When the unit is powered on, the LED lights up.; . 2 T h e R e a r P a n e l; condenser microphone.

5 7 5 Input Level LED Indicator These three LEDs will indicate the level of the input signal. When red LED flashes, it warns you that the levelof the input signal is too high and may cause distortion, please attenuate the level of the input signal. . Power LED Indicator When the unit is powered on, ...

Page 7 - : INSTALLATION AND CONNECTION; For XLR connector

6 by connecting to a mixing console's main inserts, or on an entire mix "in-line" between a mixing console's outputs - Wiring Configuration and a power amplifier. Defective wiring may degrade the performer of MP8 so, please, use good quality screenedaudio cables only. Please follow the guide...

Page 8 - Insert Leads; For Direct Output Multi-pin Connector Wiring

7 4.3 Rack Mounting The most secure mounting is on a universal rack shelf available from various rack manufactures or your musicdealer. The MP8 fits into one standard 19" rack unit of space.Please allow at least an additional 4" depth for the connectors on the rear panel. Be sure that there ...

Page 10 - TECHNICAL SPECIFICATION

9 6. TECHNICAL SPECIFICATION INPUT Connectors Impedance Max input level CMRR Six balanced XLR,Two 1/4"TRS Instrument Inputs and TWO combo on Channel One and Tw Balanced >50Kohm, Unbalanced>25Kohm >+24dBu balanced and unbalanced Typically>60dB at 1KHz OUTPUT Connectors Impedance Max o...

Page 11 - LTO

7. WARRANTY 1. WARRANTY REGISTRATION CARD To obtain Warranty Service, the buyer should first fill out and return the enclosed Warranty Registration Card within10 days of the Purchase Date. All the information presented in this Warranty Registration Card gives the manufacturer a better understanding ...

Page 12 - manual without written permission is forbidden. Copyright; SE KAKU TECHNICAL GROUP LIMITED

N F 0 2 2 4 3 - 1 . 2 No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151 Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: [email protected] Fax: 886-4-22346757 c All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, transl...

Nilfisk ALTO MP8 - Manual

Table of Contents:

Summary

Other Nilfisk ALTO Models