Nilfisk ALTO CONTROL60 - Manual

Page 2 - SAFETY RELATED SYMBOLS; C A U T I O N; Protective Ground Terminal; WARNING; Protective Ground

SAFETY RELATED SYMBOLS C A U T I O N R I S K O F E L E C T R I C S H O C K D O N O T O P E N This symbol, wherever used, alerts you to the pre-sence of un-insulated and dangerous voltages with-in the product enclosure. These are voltages thatmay be sufficient to constitute the risk of electricshock ...

Page 3 - PREFACE; The

Dear Customer: PREFACE Thanks for choosing LTO CONTROL60 and thanks for choosing one of the results of LTO AUDIO TEAM job and researches. For our LTO AUDIO TEAM, music and sound are more than a job...are first of all passion and let us say our obsession! We have been designing professional audio pro...

Page 4 - TABLE OF CONTENTS; Power Up and Audio Connections; MIDI STANDARD CONTROL; b. Application Examples; TECHNICAL SPECIFICATIONS

TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................... ..................................4 ........ 2. FEATURE LIST .....................................................................................................................

Page 6 - Used only to change editable values.; MIDI Connectors

Power Switch With LED (1) Turns the apparatus on and off. Press the SW, the power LED inside the SW will turn on. Dial Control Knob (10) Used only to change editable values. 3.2 The Rear Panel Input (19/20) These are XLR balanced connectors which connect to sources such as the channel inserts of mix...

Page 7 - Using Inserts; MIXING CONSOLE; MONO. Select the mono way in EQ TYPE. Connect one audio cable to the

a. Standard Use The CONTROL60 may be placed almost anywhere: on a table, on top of an amp, next to a mixing console. If it willbe on furniture, check the rubber feet provided to the bottom of the unit. Make sure to place the CONTROL60 awayfrom other audio equipment that may induce fields, and away f...

Page 8 - UTILITY

This function allows the loading of one of the 99 available presets, where the first 36 presets (6 for each EQtype) are factory presets, and the presets from configurable presets and all not initialized 37 to 99 are the user's (empty) when CONTROL60 is shipped. 4.3.Operational Overview Switching ON ...

Page 9 - With this function it's possible to change the EQ type.; With this function the user can store a preset into one of the; ENTER

8 b. Store Preset If confirmed, the new name will be shown in the left lower corner and in the preset field.To return to the main menu, select RET and press. With this function it's possible to change the EQ type. c. EQ. Type To load the preset. If the EQ is Dual Mono (DM), first choose the channel ...

Page 10 - To return to the main menu, select RET and press; Use

With Up/Down select one of the 6 possible EQ type (ex. Parametric mono 1 60). Selection is shown reversing the item. To confirm press enter. The following warning will be shown to the user: At the end the user will be presented with a window containing the updated preset. To return to the main menu,...

Page 11 - . These two are system parameters and do not belong to any preset.; EDIT; FLAT; Press

With the dial knob the parameter values can be changed (no confirmation needed). To get back to the mainmenu select RET and press . These two are system parameters and do not belong to any preset. ENTER 4.3.2 EDIT EQ Press key, the related LED on, this screen will present: EDIT Use to select an item...

Page 14 - MIDI Controllers Values; Amplitude; If the system is in; bypass; Select the channel to edit by means of the controller 0 (bank).

MIDI Controllers Values d \ u 0 1 2 3 4 5 6 7 8 9 0 15.0dB 14.5dB 14.0dB 13.5dB 13.0dB 12.5dB 12.0dB 11.5dB 11.0dB 10.5dB 10 10.0dB 09.5dB 09.0dB 08.5dB 08.0dB 07.5dB 07.0dB 06.5dB 06.0dB 05.5dB 20 05.0dB 04.5dB 04.0dB 03.5dB 03.0dB 02.5dB 2.0dB 1.5dB 1.0dB 00.5dB 30 00.0dB 00.5dB 01.0dB 01.5dB 02.0...

Page 15 - Input Gain & Output Volume

1 4 d \ u 0 1 2 3 4 5 6 7 8 9 0 12.0dB 11.5dB 11.0dB 10.5dB 10.0dB 09.5dB 09.0dB 08.5dB 08.0dB 07.5dB 10 07.0dB 06.5dB 06.0dB 05.5dB 05.0dB 04.5dB 04.0dB 03.5dB 03.0dB 02.5dB 20 2.0dB 1.5dB 1.0dB 00.5dB 00.0dB 00.5dB 01.0dB 01.5dB 02.0dB 02.5dB 30 03.0dB 03.5dB 04.0dB 04.5dB 05.0dB 05.5dB 06.0dB 06....

Page 16 - TECHNICAL SPECIFICATIONS

Band Pass Filters High pass Butterworth Low pass Butterworth Freq Freq 20Hz 20KHz step 1/12 oct Slope Slope AUX Section Delay line Up to 512 ms min step 21us Digital input gain /+12dB step 0.5dB Digital output volume /+12dB step 0.5dB Analog Input Section Inputs 2 XLR F electronically balanced Input...

Page 18 - manual without written permission is forbidden. Copyright; SE KAKU TECHNICAL GROUP LIMITED

N F 0 1 2 0 2 - 2 . 3 No. 1, Lane 17, Sec. 2, Han Shi West Road, Taichung 40151 Taiwan http://www.altoproaudio.com Tel: 886-4-22313737 email: [email protected] Fax: 886-4-22346757 c All rights reserved to ALTO. All features and content might be changed without prior notice. Any photocopy, transl...

Nilfisk ALTO CONTROL60 - Manual

Table of Contents:

Summary

Other Nilfisk ALTO Models