Nilfisk ALTO Apollo 8 - Manual
Nilfisk ALTO Apollo 8 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 3 – WARNING; OPERATOR SAFETY INSTRUCTIONS
- Page 5 – Introduction and Machine Specifications; NOPTE
- Page 6 – Extension Cords; 30V Electrical Connection Instructions; Figure 1
- Page 7 – How to Transport the Machine; Transporting the Machine - One Person; Premature bearing failure can
- Page 8 – Transporting the Machine - Two People
- Page 9 – Install a new abrasive belt by sliding the abrasive
- Page 10 – How to Operate the Machine
- Page 11 – Figure 9; Do not overfill dust bag or seri-
- Page 12 – Sanding Cuts and Sandpaper; Initial Cut; Final Cuts
- Page 13 – Chatter Wave Prevention
- Page 14 – Sander Adjustment Procedures; DANGER; Dust Shoe; To adjust the dust shoe follow this procedure:; Sanding Pressure; CAUTION
- Page 15 – Belt Tracking; Injury to the operator could; Operating Control; increase; in
- Page 16 – decrease; out; Routine Maintenance; Sanding Chamber
- Page 17 – Bearings
- Page 18 – Troubleshooting; Problem
- Page 20 – Tension asm. breakdown and; AMERICAN SANDERS TECHNOLOGY
- Page 21 – indicates a change has taken place since last publication
- Page 23 – Description
- Page 27 – indicates a change has taken
- Page 29 – European Locations
- Page 30 – AMERICAN SANDERS TECHNOLOGY U. S. WARRANTY; AMERICAN SANDERS TECHNOLOGY reserves the right to make
Form No. 70141A
12/00
AMERICAN SANDERS TECHNOLOGY
Printed in the U.S.A.
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read
this book prior to operating or attempting any service or maintenance procedure to your ALTO
machine could result in injury to you or to other personnel; damage to the machine or to other property
could occur as well. You must have training in the operation of this machine before using it. If you
cannot read English, have this manual explained fully before attempting to operate this machine.
Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente
antes de tratar el manejo o servicio de esta máquina.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: ALTO U.S. INC., 2100 Highway 265, Springdale, Arkansas 72764.
Apollo 8
Belt Sander
Operator's
Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 AMERICAN SANDERS TECHNOLOGY Apollo 8 Operator's Manual Operator Safety Instructions ......................................................... 3 Introduction and Machine Specifications ....................................... 5 230V Electrical Connection Instructions ..............................
AMERICAN SANDERS TECHNOLOGY Apollo 8 Operator's Manual Page 3 DANGER means: Severe bodily injury or death can occur to you or other personnel if the DAN- GER statements found on this machine or in this Owner's Manual are ignored or are not adhered to. Read and observe all DANGER statements found in ...
AMERICAN SANDERS TECHNOLOGY Apollo 8 Operator's Manual Page 5 MODEL 07065B 07069C CONTACT WHEEL SPEED (rpm)* 2700 2250 ABRASIVE SPEED 4700 *sfm 24 meters per second DUST FAN SPEED (rpm)* 6800 5670 DUST FAN FLOW 234 *(cfm) 92 liters per second MOTOR 4 hp 208-230V 60Hz 16A 2.2kW 240V 50Hz 12A WHEELS R...
