National Instruments SCC-TC02 - Manual
National Instruments SCC-TC02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – bold; italic; What You Need to Get Started
- Page 3 – Device Specific Information; Note; Installing the Module; Caution
- Page 4 – Connecting the Input Signals
- Page 5 – For more information about how to configure the SCC-TC0; Using the TC0; Scaling Voltage Measurements
- Page 6 – Measure the thermocouple voltage.; where; is thermocouple voltage.; Uncompensated Connectors and Accuracy
- Page 7 – Detecting Open Thermocouples; Calibrating the
- Page 8 – Specifications
- Page 9 – Calibrating System Offsets
- Page 10 – Analog Input
- Page 11 – Measurement Accuracy; Thermocouple
- Page 12 – Cold-junction sensor accuracy; Open Thermocouple Detection
- Page 13 – Weight; Maximum Working Voltage; Each input must remain within
- Page 14 – Environmental; in the Certification column.; Electromagnetic Compatibility; EN 61326 EMC requirements Minimum Immunity
- Page 15 – CE Compliance; Waste Electrical and Electronic Equipment (WEEE); EU Customers; I/O Connector Pin Assignments; Figure 4 shows the I/O connector pins on the bottom of the module.
- Page 16 – Pin Number
USER GUIDE
SCC-TC Series Thermocouple
Input Modules
The SCC-TC Series thermocouple input modules, SCC-TC01 and
SCC-TC02, accept input signals from B-, E-, J-, K-, N-, R-, S-, and T-type
thermocouples. Each module contains thermistor circuitry powered by
2.5 V, to compensate for cold-junction effects and can detect open
thermocouple circuits. Each module has one thermocouple input channel,
which consists of a gain of 100 differential amplifier and a dual-pole 2 Hz
filter.
Note
Alternatively, you can use the SCC-TC02 as a 2 Hz lowpass bandwidth
±
100 mV
input module.
Conventions
The following conventions are used in this guide:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash.
When this symbol is marked on
the product, refer to the
Read Me First: Safety and Radio-Frequency
Interference
document, shipped with the product, for precautions to take.
When symbol is marked on a product, it denotes a warning advising you to
take precautions to avoid electrical shock.
When symbol is marked on a product, it denotes a component that may be
hot. Touching this component may result in bodily injury.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SCC-TC Series Thermocouple Input Modules User Guide 2 ni.com bold Bold text denotes items that you must select in the software, such as menu items and dialog box options. Bold text also denotes parameter names. italic Italic text denotes variables, emphasis, a cross-reference, or an introduction to ...
© National Instruments Corporation 3 SCC-TC Series Thermocouple Input Modules User Guide ❑ Documentation – One of the following: • SC-2345/2350 User Manual • SCC-68 User Guide – SCC-TC Series Thermocouple Input Modules User Guide – Read Me First: Safety and Radio-Frequency Interference – SCC Quick S...
SCC-TC Series Thermocouple Input Modules User Guide 4 ni.com the inputs of the second-stage SCC. An example of dual-stage conditioning in an SCC-TC0 X followed by an SCC-LP01 lowpass filter module. Sockets J9 to J16 also are available for digital input/output (DIO) conditioning or control. Refer to ...
