National Instruments PXI-784xR - Manual
National Instruments PXI-784xR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1. Install Application Software and Driver; rdsoftwareversion; Start»All Programs»; Note; Unpacking; Caution
- Page 3 – Installing the NI 78
- Page 4 – Installing an NI PXI-78; Devices and Interfaces; Verify that the device appears under; Devices and Interfaces»RIO Devices
- Page 5 – Step 3. Connect Signals; R Digital R Series devices.; R Connector Pin Assignments and Locations
- Page 7 – manuals; Connectivity Options; R Series Connectivity Options; Cable
- Page 8 – Step 4. Using Your NI 78; R Device with a LabVIEW FPGA Example VI; Application Software and Driver
- Page 10 – Adding Analog Output to the FPGA Application
- Page 12 – Where to Go From Here
- Page 13 – Help»Find Examples; Select devices to find examples for; Where to Go for Support; support
Getting Started with R Series Intelligent DAQ
This document explains how to install and configure National Instruments PCI/PXI-781
x
R,
PCI/PXI-783
x
R, PXI-784
x
R, and PXI-785
x
R (NI 78
xx
R) devices. This document also contains a
tutorial section that demonstrates how to begin taking a measurement using a LabVIEW FPGA
example VI.
Figure 1.
PCI and PXI R Series Devices
NI 78
xx
R Required Components
The following items are necessary to set up and use the NI PCI/PXI-78
xx
R:
❑
The following software packages:
–
LabVIEW
–
LabVIEW FPGA Module
–
NI-RIO device drivers
–
(Optional)
LabVIEW Real-Time Module
Refer to
Step 1. Install Application Software and Driver
, for information on R Series software
support.
❑
Development computer or PXI/CompactPCI chassis and PXI/CompactPCI embedded controller
running Windows 2000/XP.
❑
At least one cable and accessory for connecting signals to the NI 78
xx
R. For a list of applicable
cable and accessory options, refer to the
section.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Getting Started with R Series Intelligent DAQ 2 ni.com Step 1. Install Application Software and Driver Before installing the NI 78 xx R, you need to install the application software and device driver. Visit ni.com/info and enter rdsoftwareversion to determine which minimum versions of software you n...
© National Instruments Corporation 3 Getting Started with R Series Intelligent DAQ Installing the NI 78 xx R You can install the NI PCI-78 xx R in any available PCI expansion slot in the computer, and the NI PXI-78 xx R in any available peripheral slot in the PXI or CompactPCI chassis. To achieve th...
Getting Started with R Series Intelligent DAQ 4 ni.com Figure 3. Installing an NI PXI-78 xx R Device in a PXI Chassis 5. For the NI PCI-78 xx R, secure the device mounting bracket to the computer back panel rail. For the NI PXI-78 xx R, secure the device front panel to the chassis front panel mounti...
