National Instruments PXI-1045 - Manual
National Instruments PXI-1045 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – What You Need to Get Started; PXI-1045 power supply shuttle; Description
- Page 3 – Installation and Maintenance; Read Me First: Safety and Radio-Frequency Interference; Removal
- Page 4 – Configuration; Caution; Specifications; AC Input; Operating voltage range
- Page 5 – Line regulation; DC Output; DC current capacity (I; Load regulation; Peripheral slots; Voltage
- Page 6 – Maximum ripple and noise (20 MHz bandwidth)
USER GUIDE
NI PXI-1045 Power Supply Shuttle
This document explains the installation and maintenance of the
NI PXI-1045 power supply shuttle. The NI PXI-1045 power supply shuttle
is a replacement part for the PXI-1045 chassis.
Introduction
To minimize downtime caused by a power supply failure, the PXI-1045
chassis has a modular power supply shuttle. This power supply shuttle
includes the chassis power supply, cooling fans, and fan-control circuitry.
Key features of the power supply shuttle include:
•
Universal AC input with automatic voltage and frequency ranging
•
Over-current protection through push-reset circuit breaker
•
Remote voltage monitoring and inhibit through a rear-panel connector
•
Temperature-sensing module that can adjust fan speed based on
air-intake temperature to minimize audible noise
•
Circuitry to control a front-panel LED that indicates power supply
failure
Unpacking
Carefully inspect the shipping container and the power supply shuttle for
damage. Check for visible damage to the metal work. Check to make sure
all handles, hardware, and switches are undamaged. Visually inspect the
inside of the shuttle for any possible damage, debris, or detached
components. If damage appears to have been caused during shipment, file
a claim with the carrier. Retain the packing material for possible inspection
and/or reshipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI PXI-1045 Power Supply Shuttle User Guide 2 ni.com What You Need to Get Started To set up and use the NI PXI-1045 Power Supply Shuttle, you need the following items: ❑ PXI-1045 chassis (the unit being repaired) ❑ PXI-1045 power supply shuttle ❑ Read Me First: Safety and Radio-Frequency Interferenc...
© National Instruments Corporation 3 NI PXI-1045 Power Supply Shuttle User Guide Installation and Maintenance The information in this section is for qualified service personnel only. Read the Read Me First: Safety and Radio-Frequency Interference document included with your kit before using the powe...
NI PXI-1045 Power Supply Shuttle User Guide 4 ni.com Configuration The fan-speed selector switch is on the rear panel of the power supply shuttle. Refer to Figure 1 to locate the fan-speed selector. Select HIGH for maximum cooling performance (recommended) or AUTO for quieter operation. When set to ...
