National Instruments NI PCIe-8231 - Manual
National Instruments NI PCIe-8231 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Caution; Measurement Category; : Measurement circuits are subjected to working
- Page 4 – Unpacking; Installation; Specifications
- Page 5 – Note; PC Expansion Slots; not
- Page 6 – Connect the Ethernet cable to the RJ-45 connector on the; These specifications are typical at 25 °C, unless otherwise stated.; Physical Characteristics
- Page 7 – pairs of Category 5 cable; maximum
- Page 8 – Electromagnetic Compatibility
- Page 9 – certification; in the Certification column.; Waste Electrical and Electronic Equipment (WEEE); EU Customers
- Page 10 – Where to Go for Support; you have access to everything from
NI PCIe-8231 Quick Start Guide
The NI PCIe-8231 is a Gigabit Ethernet (GigE) interface device for PCI
Express. The following sections describe how to install and configure the
NI PCIe-8231.
What You Need to Get Started
You need the following items to set up and use the NI PCIe-8231.
❑
NI Vision Acquisition Software 8.2.1 or later
❑
NI Vision Acquisition Software Release Notes
❑
NI PCIe-8231 GigE interface device
❑
Computer running Windows 2000/XP with at least one PCIe slot
❑
GigE Vision Camera
❑
Ethernet cable
❑
Optional software packages and documentation:
–
NI Vision Development Module
–
NI Vision Builder for Automated Inspection
–
LabVIEW
–
LabWindows
™
/CVI
™
–
Microsoft Visual Basic
Safety Information
Caution
The following paragraphs contain important safety information you
must
follow
when installing and operating the device.
Do
not
operate the device in a manner not specified in the documentation.
Misuse of the device may result in a hazard and may compromise the safety
protection built into the device. If the device is damaged, turn it off and do
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
© National Instruments Corporation 3 NI PCIe-8231 Quick Start Guide Caution National Instruments measurement products may be classified as either Measurement Category I or II. Operate products at or below the Measurement Category level specified in the hardware specifications. Measurement Category 1...
NI PCIe-8231 Quick Start Guide 4 ni.com Unpacking The NI PCIe-8231 ships in an antistatic package to prevent electrostatic discharge from damaging device components. To avoid such damage in handling the device, take the following precautions: • Ground yourself via a grounding strap or by holding a g...
© National Instruments Corporation 5 NI PCIe-8231 Quick Start Guide 4. Touch a metal part of the computer to discharge any static electricity that might be on your clothes or body. 5. Choose an unused PCIe slot, and remove the corresponding expansion slot cover on the back panel of the computer. Not...
