National Instruments NI-845x Software and Hardware - Manual
National Instruments NI-845x Software and Hardware – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Back; Install the Hardware
- Page 3 – Complete the following steps to install an NI USB device:; Next; or; Yes; to install the software for each device.
- Page 4 – Step 3: Confirm that Your Device Is Recognized; Uninstalling the NI-845
- Page 5 – Further Documentation; User Manual
January 2007
371708B-01
INSTALLATION GUIDE
NI-845
x
Software and
Hardware
This installation guide contains instructions to help you install your NI-845
x
software and hardware. Complete documentation is in the
NI-845x Software User
Manual
, which is available on your
NI-845x Software
CD in Adobe Acrobat
portable document format (PDF). Refer to the
NI-845x Software User
Manual.pdf
file in the
Documentation
folder on the CD. The NI-845
x
software
on this CD supports Microsoft Windows operating systems.
Install the NI-845
x
Software
Before installing the NI-845
x
software, log on as Administrator or as a user with
Administrator privileges.
The NI-845
x
software setup program must have Administrator privileges because
the program modifies the configuration registry of your system. Complete the
following steps to install the NI-845
x
software.
1. Insert the
NI-845x Software
CD into your CD-ROM drive. The installer
launches if your CD-ROM drive plays data CDs automatically. If the installer
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI-845x Installation Guide 2 ni.com does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-845x Software CD. 2. The installation wizard guides you through the necessary steps to install the NI-845 x software. You can go back and change v...
© National Instruments Corporation 3 NI-845x Installation Guide Step 2: Install the Devices, Accessories, and Cables Complete the following steps to install an NI USB device: 1. Connect the USB cable from the computer USB port or from any other hub that provides USB power to the USB port on the devi...
NI-845x Installation Guide 4 ni.com Step 3: Confirm that Your Device Is Recognized To verify that the USB device is recognized, complete the following steps: 1. Double-click the Measurement and Automation icon on the desktop to open Measurement and Automation Explorer (MAX). 2. Expand Devices and In...
