National Instruments HPC167064 - Manual
National Instruments HPC167064 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Absolute maximum ratings indicate limits beyond; DC Electrical Characteristics
- Page 3 – AC Electrical Characteristics; Figures 1
- Page 6 – CKI Input Signal Characteristics
- Page 7 – Timing Waveforms
- Page 10 – Functional Modes of Operation
- Page 12 – Pin Descriptions
- Page 13 – Connection Diagram
- Page 15 – Operating Modes
- Page 16 – Wait States
- Page 20 – Timer Overview
- Page 21 – Timer Registers; Timer Applications; WATCHDOG Logic; MICROWIRE/PLUS Operation
- Page 22 – MICROWIRE/PLUS Application
- Page 26 – Design Considerations
- Page 29 – HPC Instruction Set Description
- Page 30 – Code Efficiency; Development Support
- Page 32 – Part Selection; Socket Selection
- Page 34 – Physical Dimensions
TL/DD11046
HPC167064/HPC467064
High-Performance
microController
with
a
16k
UV
Erasable
CMOS
EPROM
PRELIMINARY
August 1992
HPC167064/HPC467064 High-Performance
microController with a 16k UV Erasable CMOS EPROM
General Description
The HPC167064 is a member of the HPC family of High
Performance microControllers. Each member of the family
has the same core CPU with a unique memory and I/O
configuration to suit specific applications. The HPC167064
has a 16 kbyte, high-speed, UV-erasable, electrically pro-
grammable CMOS EPROM. This is ideally suited for appli-
cations where fast turnaround, pattern experimentation, and
code
confidentiality
are
important
requirements.
The
HPC167064 can serve as a stand-alone emulator for either
the HPC16064 or the HPC16083. Two configuration regis-
ters have been added for emulation of the different chips.
The on-chip EPROM replaces the presently available user
ROM space. The on-chip EPROM can be programmed via a
DATA I/O UNISITE. There are security features added to
the chip to implement READ, ENCRYPTED READ, and
WRITE privileges for the on-chip EPROM. These defined
privileges are intended to deter theft, alteration, or uninten-
tional destruction of user code. Each part is fabricated in
National’s advanced microCMOS technology. This process
combined with an advanced architecture provides fast, flex-
ible I/O control, efficient data manipulation, and high speed
computation.
The HPC devices are complete microcomputers on a single
chip. All system timing, internal logic, EPROM, RAM, and
I/O are provided on the chip to produce a cost effective
solution for high performance applications. On-chip func-
tions such as UART, up to eight 16-bit timers with 4 input
capture registers, vectored interrupts, WATCHDOG
TM
logic
and MICROWIRE/PLUS
TM
provide a high level of system
integration. The ability to address up to 64k bytes of exter-
nal memory enables the HPC to be used in powerful appli-
cations typically performed by microprocessors and expen-
sive peripheral chips.
The microCMOS process results in very low current drain
and enables the user to select the optimum speed/power
product for his system. The IDLE and HALT modes provide
further current savings. The HPC167064 is available only in
68-pin LDCC package.
Features
Y
HPC familyÐcore features:
Ð 16-bit architecture, both byte and word operations
Ð 16-bit data bus, ALU, and registers
Ð 64 kbytes of direct memory addressing
Ð FASTÐ200 ns for fastest instruction when using
20.0 MHz clock, 134 ns at 30.0 MHz
Ð High code efficiencyÐmost instructions are single
byte
Ð 16 x 16 multiply and 32 x 16 divide
Ð Eight vectored interrupt sources
Ð Four 16-bit timer/counters with 4 synchronous out-
puts and WATCHDOG logic
Ð MICROWIRE/PLUS serial I/O interface
Ð CMOSÐvery low power with two power save modes:
IDLE and HALT
Y
16 kbytes high speed UV erasable: electrically program-
mable CMOS EPROM
Y
Stand-alone emulation of HPC16083 and HPC16064
family
Y
EPROM and configuration bytes programmable by
DATA I/O UNISITE with Pinsite Module
Y
Four selectable levels of security to protect on-chip
EPROM contents
Y
UARTÐfull duplex, programmable baud rate
Y
Four additional 16-bit timer/counters with pulse width
modulated outputs
Y
Four input capture registers
Y
52 general purpose I/O lines (memory mapped)
Y
Commercial (0
§
C to
a
70
§
C), and military (
b
55
§
C to
a
125
§
C) temperature ranges for 20.0 MHz, commercial
(0
§
C to
a
70
§
C) for 30.0 MHz
Block Diagram
(HPC167064 with 16k EPROM shown)
TL/DD/11046 – 1
Series 32000
É
and TRI-STATE
É
are registered trademarks of National Semiconductor Corporation.
MICROWIRE/PLUS
TM
and WATCHDOG
TM
are trademarks of National Semiconductor Corporation.
UNIX
É
is a registered trademark of AT & T Bell Laboratories.
IBM
É
and PC-AT
É
are registered trademarks of International Business Machines Corp.
SunOS
TM
is a trademark of Sun Microsystems.
C
1995 National Semiconductor Corporation
RRD-B30M105/Printed in U. S. A.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Absolute Maximum Ratings If Military/Aerospace specified devices are required,please contact the National Semiconductor SalesOffice/Distributors for availability and specifications. Total Allowable Source or Sink Current 100 mA Storage Temperature Range b 65 § C to a 150 § C Lead Temperature (Solder...
20 MHz AC Electrical Characteristics (See Notes 1 and 4 and Figures 1 thru 5 ). V CC e 5V g 5% * , T A e b 55 § C to a 125 § C for HPC167064 and V CC e 5V g 10%, T A e 0 § C to a 70 § C for HPC467064 Symbol and Formula Parameter Min Max Units Notes f C CKI Operating Frequency 2 20 MHz t C1 e 1/f C C...
30 MHz AC Electrical Characteristics (Continued) (See Notes 1 and 4 and Figures 1 thru 5 ). V CC e 5V g 10%, T A e 0 § C to a 70 § C for HPC467064. (Continued) Symbol and Formula Parameter Min Max Units Notes t ARR e (/4 t C b 5 ALE Falling Edge to RD Falling Edge 12 ns t ACC e t C a WS b 32 Data In...
