National Instruments Gigabit Ethernet Adapters - Manual
National Instruments Gigabit Ethernet Adapters – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installing Your PCI Board; Start»Shut Down; Connect the Network Cable
- Page 3 – must; Install the Drivers
- Page 4 – Complete the following steps to install the drivers:; Next
- Page 5 – PCI/PXI Gigabit Ethernet Adapters
- Page 6 – Intel PRO; Windows 98 Installation
- Page 8 – Found New Hardware Wizard; Recommended
- Page 9 – Windows automatically detects the new hardware and displays a; window, as shown in the following; options
- Page 10 – Insert Disk; Intel PRO Adapter
- Page 11 – Start»Settings»Control Panel»Network»Adapters
- Page 12 – Alternative Driver Installation Options; Drivers and Downloads; PCI/PXI Gigabit Ethernet Drivers
- Page 13 – Troubleshooting; Windows NT Troubleshooting; Testing the Adapter
- Page 14 – Adapter Cannot Connect to the Network
- Page 15 – Computer Hangs When Drivers Are Loaded; PCI/PXI Installation; Diagnostics Pass, But Connection Fails or Errors Occur; Additional Troubleshooting Tools
- Page 16 – PCI/PXI Installation Tips; Ethernet Adapter
- Page 17 – Ethernet Adapter Specifications; LEDs
INSTALLATION GUIDE
PCI/PXI Gigabit Ethernet Adapters
National Instruments gigabit Ethernet adapters are based on the
Intel 82540-compatible Ethernet controller.
This document explains how to install and troubleshoot the Ethernet drivers
for your PCI/PXI board. Some boards also contain additional functionality
(for example, GPIB). Refer to the documentation that came with your kit to
install the software for the other functionality.
Installing Your PXI Board
Complete the following steps to install the Ethernet adapter:
1.
Shut down Windows, if it is running, by selecting
Start»Shut Down
.
2.
Power off your PXI or CompactPCI chassis. Keep the chassis plugged
in so that it remains grounded as you install the adapter.
3.
Remove the filler panel from a PXI peripheral bus master slot. The
adapter requires a bus master slot to take advantage of the onboard
DMA and Ethernet controllers. All PXI chassis and most CompactPCI
chassis contain only bus master slots. Refer to your chassis
documentation to verify you are using a bus master slot.
4.
Touch a metal part on your chassis to discharge any static electricity
that might be on your clothes or body.
5.
Insert the adapter into the selected bus master slot. Use the
injector/ejector handle to fully inject the device into place.
6.
Screw the front panel of the adapter to the front panel mounting rail
of the PXI or CompactPCI chassis.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PCI/PXI Gigabit Ethernet Adapters Installation Guide 2 ni.com Installing Your PCI Board Complete the following steps to install the Ethernet adapter: 1. Shut down Windows, if it is running, by selecting Start»Shut Down . 2. Power off the computer and unplug the power cord. 3. Remove the cover to giv...
© National Instruments Corporation 3 PCI/PXI Gigabit Ethernet Adapters Installation Guide Caution If using less than 4-pair cabling, you must manually configure the speed and duplex setting of the adapter and the link partner. In addition, with 2- and 3-pair cabling, the adapter can achieve speeds o...
PCI/PXI Gigabit Ethernet Adapters Installation Guide 4 ni.com Windows Me/98 Complete the following steps to install the drivers: 1. Shut down, then power off the computer, as shown in the following figure. 2. Install the hardware and cables, then power on the computer, as shown in the following figu...
