National Instruments 8252 - Manual
National Instruments 8252 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Information; Caution
- Page 3 – must; Measurement Category; not
- Page 4 – Unpacking; Installation; Specifications
- Page 5 – Configuring the NI PCI-8252; Note; Physical
- Page 6 – Connector; PCI V; Power Consumption; The NI PCI-8254 device is intended for indoor use only.
- Page 7 – Storage Environment; Electromagnetic Compatibility; CE Compliance
- Page 8 – Where to Go for Support; you have access to everything from
NI PCI-8252 Quick Start Guide
The NI PCI-8252 is a highly flexible IEEE 1394a interface device for PCI.
The following sections describe how to get started using the NI PCI-8252.
Installing the NI PCI-8252
The following section contains a list of necessary and optional items for
acquiring images with the NI PCI-8252. This section also explains how to
unpack, configure, and install the NI PCI-8252.
What You Need to Get Started
You need the following items to set up and use the NI PCI-8252:
❑
NI-IMAQ for IEEE 1394 Cameras Software Installation Guide
❑
NI-IMAQ for IEEE 1394 Cameras and documentation
Note
PDFs of the NI-IMAQ for IEEE 1394 Cameras documentation are installed on your
computer at
<NI-IMAQ for IEEE 1394>/docs
where
<NI-IMAQ for IEEE 1394>
is the location to which NI-IMAQ for IEEE 1394 Cameras is installed.
❑
Computer with at least one PCI slot running Windows 2000/XP
❑
IEEE 1394 Camera
❑
Optional software packages and documentation:
–
IMAQ Vision for LabVIEW, LabWindows
™
/CVI
™
, or
Measurement Studio (Visual Basic)
–
Vision Builder for Automated Inspection
–
LabVIEW
–
LabWindows/CVI
–
Measurement Studio
❑
IEEE 1394 cable
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI PCI-8252 Quick Start Guide 2 ni.com Safety Information Caution The following paragraphs contain important safety information you must follow when installing and operating the device. Do not operate the device in a manner not specified in the documentation. Misuse of the device may result in a haz...
© National Instruments Corporation 3 NI PCI-8252 Quick Start Guide You must insulate signal connections for the maximum voltage for which the device is rated. Do not exceed the maximum ratings for the device. Remove power from signal lines before connection to or disconnection from the device. Cauti...
NI PCI-8252 Quick Start Guide 4 ni.com • Measurement Category IV is for measurements performed at the primary electrical supply installation (<1,000 V). Examples include electricity meters and measurements on primary overcurrent protection devices and on ripple control units. Unpacking The NI PCI...
