Milwaukee HEAVY-DUTYSANDERS - Manual
Milwaukee HEAVY-DUTYSANDERS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – READ AND SAVE ALL INSTRUCTIONS
- Page 6 – TOOL ASSEMBLY; OPERATION
- Page 11 – MAINTENANCE; ACCESSORIES
- Page 13 – RÈGLES DE SÉCURITÉ PARTICULIÈRE; Pictographie
- Page 14 – LISEZ ATTENTIVEMENT CES INSTRUCTIONS
- Page 15 – MANIEMENT
- Page 21 – ACCESSOIRES
- Page 23 – Simbología; DESCRIPCION FUNCIONAL
- Page 24 – LEA Y GUARDE TODAS LAS INSTRUCCIONES
- Page 25 – ENSAMBAJE DE LA HERRAMIENTA; OPERACION
- Page 31 – MANTENIMIENTO
- Page 32 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; authorized; Brookfield, Wisconsin USA; CANADA; Service; MEXICO; Servicios de; Milwaukee Electric Tool; agréés
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
HEAVY-DUTY SANDERS/GRINDERS
EXTRA ROBUSTE PONCEUSE-RECTIFIEUSE
LIJADORAS/ESMERILADORAS HEAVY-DUTY
Cat. No.
No de Cat.
Cat. No.
6148
6149-20
6151
6152-20
6153-20
6154-20
6155-20
6156-20
6160-20
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee HEAVY-DUTYSANDERS
Summary
page 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord. Using extension cords with inadequately sized wire causes a serious dr...
page 6 TOOL ASSEMBLY Installing Side Handle The side handle may be installed on the top of the gear case or on either side of gear case for right or left handed use. Position side handle in the location which offers best control and guard protection. To install, thread side handle into side handle s...
page 11 Maintaining Tools Keep your tool in good repair by adopting a regular maintenance pro- gram. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper ...
