Milwaukee 6514 Series - User Manual
Milwaukee 6514 Series – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MILWAUKEE
- Page 5 – WARNING
- Page 6 – Cleaning; Maintaining Tool; Repairs
- Page 9 – Sélection d’une lame; WAUKEE; poser; MANIEMENT; Patin pivot réglable; AVERTISSEMENT
- Page 11 – Sciage en plongée; Nettoyage; Entretien de l’outil
- Page 14 – DESCRIPCIÓN FUNCIONAL; ENSAMBLAJE DE LA HERRAMIENTA
- Page 16 – recto; Corte por penetración; ADVERTENCIA
- Page 19 – MILWAUKEE ELECTRIC TOOL CORPORATION; MILWAUKEE Service; factory; Canada - Service MILWAUKEE; MEXICO - Soporte de Servicio
18 VOLT SAWZALL
®
HATCHET ™
PASSE-PARTOUT SAWZALL
®
18V
SAWZALL
®
HATCHET™ DE 18 V
Catalog No.
6514 Series
No de Cat.
Séries 6514
Catálogo No.
Serie 6514
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 6514 Series
Summary
2 3 WORK AREA SAFETY ELECTRICAL SAFETY PERSONAL SAFETY WARNING READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) pow...
8 9 Using the Orbit Control Switch The Sawzall Hatchet TM orbit control switch allows the tool to be operated in straight reciprocating (non orbital) or orbital action. Straight reciprocating action should be used when a smooth cut is needed. Orbital action is recommended for fast, aggressive cuttin...
10 11 Cleaning Clean dust and debris from charger and tool vents. Keep tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean the tool, battery pack and charger since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some...
