Milwaukee 6278-20 - Manual
Milwaukee 6278-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
- Page 3 – MILWAUKEE; Double Insulated; lever; Improperly connecting the; READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE.; * Based on limiting the line voltage drop to fi ve volts
- Page 4 – Wood; Straight cuts
- Page 5 – LIMITED WARRANTY - USA AND CANADA; Distributor or Store Stamp:; LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.
- Page 6 – Double Isolation; LISEZ ATTENTIVEMENT CES IN-; Fiche; Si le fi l de mise à
- Page 7 – Matériau Mouvement; Pour réduire les
- Page 8 – GARANTIE LIMITÉE - AUX ÉTATS-UNIS ET AU CANADA; Procédure pour assurer la validité de la garantie; GARANTIE LIMITÉE – MEXIQUE, AMÉRIQUE CENTRALE ET CARAÏBES
- Page 9 – LEA TODAS LAS ADVERTENCIAS E INSTRUCCIONES DE; zapata
- Page 10 – Puede haber riesgo; LEA Y GUARDE TODAS LAS; Amperios; Para reducir el riesgo; Zapata
- Page 11 – Material; Madera; Cortes rectos
- Page 13 – MILWAUKEE ELECTRIC TOOL CORPORATION; MILWAUKEE Service; Canada - Service MILWAUKEE; centre d’entretien; MEXICO - Soporte de Servicio; authorized; Registre su herramienta en línea, en
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE
L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL
OPERADOR.
Cat. No.
No de cat.
6278-20
JIG SAW
SCIE SAUTEUSE
SIERRA CALADORA
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 6278-20
Summary
2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive atmo- spheres, such as in the presence of fl ammable liquids, gases or dust. Power tools ...
4 5 • Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a live wire may make exposed metal parts of the power tool live and could give the operator an electric shock. • Use ...
6 7 Using the shoe cover The shoe cover is used to prevent marring and scratching of the workpiece surface. To attach the shoe cover:1. Unplug tool.2. Hook the front of the cover over the steel shoe. 3. Snap the rear of the shoe cover over the back of the shoe. Be sure both sides are snapped in plac...