Milwaukee 6184-21- User Manual
Milwaukee 6184-21– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SPECIFIC SAFETY INSTRUCTIONS - HAND-HELD ABRASIVE CUT-OFF GRINDER
- Page 4 – FUNCTIONAL DESCRIPTION; Symbology; Specifications
- Page 5 – READ AND SAVE ALL INSTRUCTIONS FOR
- Page 6 – TOOL ASSEMBLY
- Page 7 – OPERATION
- Page 8 – ACCESSORIES; MAINTENANCE
- Page 10 – MESURES DE SÉCURITÉ SPÉCIALES
- Page 11 – Pictographie; Spécifications; DESCRIPTION FONCTIONNELLE
- Page 12 – LISEZ ATTENTIVEMENT CES INSTRUCTIONS
- Page 14 – MANIEMENT
- Page 17 – REGLAS ESPECIFICAS DE SEGURIDAD
- Page 19 – TIERRA; EXTENSIÓNES ELÉCTRICAS; LEA Y GUARDE TODAS LAS INSTRUCCIONES
- Page 20 – ENSAMBAJE DE LA HERRAMIENTA
- Page 21 – OPERACION
- Page 23 – ACCESORIOS
- Page 24 – MILWAUKEE ELECTRIC TOOL CORPORATION; A Company within the Atlas Copco Group; UNITED STATES; MILWAUKEE Service; In addition, there is a worldwide network of; factory; CANADA; Service MILWAUKEE; MEXICO; Servicios de MILWAUKEE; Milwaukee Electric Tool
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
HEAVY-DUTY 14" HAND-HELD ABRASIVE CUT-OFF GRINDER
ROBUSTE TRONÇONNEUSE MANUELLE À DISQUE ABRASIF 35,6 cm
SIERRA TRONZADORA ABRASIVA DE MANO DE 35,6cm
PARA TRABAJOS PESADOS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
Catalog No.
No de Cat.
Número de Catálogo
6184-01
6184-21
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
page 3 SPECIFIC SAFETY INSTRUCTIONS - HAND-HELD ABRASIVE CUT-OFF GRINDER 1. To reduce the risk of injury, avoid inhalation of dust generated by grinding and cutting operations. Exposure to dust may cause respiratory ailments. Use approved NIOSH or OSHA respirators, safety glasses or face shields, gl...
page 4 FUNCTIONAL DESCRIPTION Double Insulated Symbology No Load Revolutions per Minute (RPM) Volts Alternating Current Canadian Standards Association Underwriters Laboratories, Inc. Amps Cat. No. 6184-01 Wheel Size 14" Cut-Off Grinder Capacities RPM 4350 Arbor Hole Size 1" or 20 mm Cutting ...
page 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord. Using extension cords with inadequately sized wire causes a serious dr...