Miele PRI 421 [G STW] - Installation Manual

Miele PRI 421 [G STW]

Miele PRI 421 [G STW] – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
Page: / 32

Table of Contents:

  • Page 2 – Contents; Installation notes
  • Page 4 – Installation requirements; Operating conditions; - Maximum height above sea level of location site: 1000 m; Floor anchoring; Measures to secure the ironer in place on the floor are essential.; Electrical connection
  • Page 5 – Gas connection; Follow the installation instructions for the gas connection.
  • Page 6 – Waste gas duct; Determining the total pipe lengths and pipe diameters
  • Page 7 – Substitute pipe lengths
  • Page 8 – Permissible total pipe lengths; Ducting requirements; Take these safety precautions if you smell gas; - Do not strike any matches or ignite a cigarette lighter.
  • Page 9 – What needs to be observed before commissioning; Setup site
  • Page 10 – Required flow rate; Liquid gas
  • Page 11 – Exhaust gas evacuation ducts
  • Page 12 – Exhaust air and supply air ducting cross-sections; Exhaust gas values; Room ventilation opening for air intake from the setup room
  • Page 13 – What needs to be observed during commissioning
  • Page 14 – Connection and conversion instructions; Natural gas; Gas regulating valve
  • Page 15 – Baffle x2
  • Page 16 – Connection pressure and category; Settings with natural gas
  • Page 17 – Dimensions
  • Page 18 – Installation
  • Page 19 – Vent connection
  • Page 20 – Technical data; Voltage variants/electrical data
  • Page 32 – United Kingdom
Loading the manual

Installation plan
Commercial ironer (gas heating)
PRI318 G
PRI418 G
PRI421 G

Always

read the operating instructions before

setting up, installing and commissioning the ma-
chine. This prevents both personal injury and
damage to the machine.

en-GB

M.-Nr. 11 470 430

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Contents; Installation notes

Contents 2 Installation notes ............................................................................................................. 4 Installation requirements ................................................................................................... 4 Operating conditions ............

Page 4 - Installation requirements; Operating conditions; - Maximum height above sea level of location site: 1000 m; Floor anchoring; Measures to secure the ironer in place on the floor are essential.; Electrical connection

Installation notes 4 Installation requirements The flatwork ironer must only be set up by a Miele authorised and trained service techni-cian or an authorised dealer.  This flatwork ironer must be installed in accordance with all relevant regulations and standards. Local energy supplier regulations ...

Page 5 - Gas connection; Follow the installation instructions for the gas connection.

Installation notes 5 The required voltage, rated load and external fuse rating can be found on the data plateon the flatwork ironer.Connection to a supply voltage other than the one quoted on the data plate can lead tofunctional faults and damage to the flatwork ironer.Before connecting the flatwork...

Other Miele Models

All Miele Other