Miele CM/1 - User Manual
Miele CM/1 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ELWA GmbH; CM ConductivityMeter:; CM ConductivityMeter installation:; Clip the meter in place on the fixing rail.; Acknowledging an alarm:
- Page 3 – Permanent buzzer deactivation:; Capacity in litres between cartridge reactivation cycles; °d German hardness
- Page 4 – Technical data for CM ConductivityMeter
1 of 4
ELWA GmbH
Conductivity meter: CM
ConductivityMeter
CM V 1.5 03.18
Please read these operating instructions
carefully and file for future reference.
1.
Applications:
The CM ConductivityMeter measures and
indicates the conductivity of pre-treated
water in the 0 – 199.9 µS/cm range. The device
should only be used for this purpose.
2.
Safety notes:
Please note that the CM should only be used
for the intended purpose. Failure to comply
with operating instructions may invalidate
your guarantee!
Please observe valid health and occupational
safety regulations at all times!
Never attempt repairs to the machine or its
AC adapter. Housing sections containing live
componentry should only be opened by
suitably qualified personnel.
Only connect the AC adapter to a properly
installed wall socket.
Always unplug the AC adapter to properly
disconnect the unit from the mains supply.
Use only the AC adapter provided.
3.
Scope of delivery
CM ConductivityMeter parts list
1.
Conductivity meter
2.
Meter with sensor and supply lead
3.
Meter bracket
4.
2 nuts, ¾"
5.
LED complete with connection cable
6.
AC plug unit with adapters for
AUS/EU/UK/USA
7.
4 S6 rawl plugs for wall assembly
8.
4 Torx raised head screws, galvanised,
4.5 x 40 mm
9.
4 Duo Taptite bolts M4x10 (2x for display;
2x for bracket)
10.
5 self-locking cable ties (1x for LED; 1x for
mounting bracket; 3x for accessories bracket)
11.
Operating instructions
12.
1 hose, 1940 mm long, ¾"
1 straight / 1 angled
13.
1 hose, 1500 mm long, ¾"
1 straight / 1 angled
4.
Unboxing and inspection:
Unbox the machine carefully, check that no
items are missing and inspect the condition of
the unit. Any complaints should be made
immediately. Never attempt to operate a unit
which is not in perfect working order.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 of 4 ELWA GmbH 5. CM ConductivityMeter: Housing unit o Remove the fixing rail from the grey bracket on the CM ConductivityMeter and affix on mounting bracket with two M4x10 bolts. o Secure the meter's mounting bracket in the housing unit with two M4x10 bolts. o Clip the meter in place on the fixin...
3 of 4 ELWA GmbH A prolonged period of inactivity may cause the conductivity to rise and trigger the alarm. The conductivity should drop to below the set value during the next rinse cycle. If the alarm is still active after rinsing, the cartridge is depleted and needs replacing. When ‘OFL’ appears i...
4 of 4 ELWA GmbH 7. Technical data for CM ConductivityMeter ConductivityMeter Single-line display Range: 0 – 199.9 µS/cm 10 switching points selectable: 1/3/5/10/15/20/50/75/100/199.9 µS/cm Optical and acoustic 'change cartridge' indicator Wall bracket Connection to external LED Manual calibration o...
