Miele DA 210-2 - Manual

The appliance is only completelyisolated from the electricity supply when: – it is switched off at the wall socket and the plug removed (do not pull onthe cable, only on the plug), or – the fuse from the fused spur connec- tion unit is withdrawn, or – the mains fuse is withdrawn, or – the screw-out ...

Installation The minimum safety distance be-tween the top of the cooker / hob and the bottom of the cooker hoodshould be at least: – 550 mm above electric hobs and cookers, – 650 mm above gas hobs and cookers, – 650 mm above an open grill from our range For non-Miele cooking appliancesmaintain the s...

When using the cooker hood at thesame time as another heating ap- pliance which depends on the air in theroom (e.g. gas, oil or coal fired heaters,continuous flow or other water heaters,gas cooker, gas hob or gas oven), spe-cial care must be taken as the action ofthe cooker hood extracts air from th...

DA 200-2, DA 200-2 EXT Description of the appliance 8

The cooker hood works with . . . air extraction: The air is drawn in and cleaned by thegrease filters and directed outside. The cooker hood is fitted with a non-re-turn flap. This flap is closed when thecooker hood is switched off. No ex-change of room air and outside air cantake place. When the coo...

Main switch Switch the main switch to "I". The fanand the lighting can now be operated. If the appliance is not going to be usedfor a longer period of time (e.g. whilston holiday) switch the appliance off byturning the main switch to "0". The next time it is switched on thecooker hoo...

To switch the fan off ^ Use the On/Off touch control toswitch the fan off. The indicator lamp for the control goesout. Switching the lighting on The hob lighting can be switched onand off independently of the fan. ^ Briefly press the lighting touch con- trol to switch on the hob illumination. The in...

Filter operating hours counter The number of hours the appliance hasbeen in operation for is stored in mem-ory. The indicator lamp for the grease filtercontrol will light up after 30 hours of op-eration. The grease filters must then becleaned. After the grease filters havebeencleaned and put in plac...

Before any cleaning or maintenancework the cooker hood must be dis-connected from the mains supply.Ensure that:– it is switched off at the fused spurconnection unit, or– the mains fuse is withdrawn, or– the screw-out fuse is removed (incountries where this is applicable). Housing Warning: The surfac...

Grease filters The re-usable metal grease filters in theappliance remove solid particles fromthe kitchen vapours (grease, dust, etc)preventing soiling of the cooker hood. The filters should be cleaned regularly(at least every 3-4 weeks) to avoid abuild up of fat, but always clean imme-diately the gr...

Changing a halogen lamp Disconnect the cooker hood fromthe mains supply. Ensure that:– it is switched off at the fused spurconnection unit, or– the mains fuse is withdrawn, or– the screw-out fuse is removed (incountries where this is applicable). Exercise caution when changinghalogen lamps. They get...

In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee please contact: – Your Miele Dealer or – The Miele Service Department (see back cover for address). When contacting the Service Depart-ment, please quote the model and serialnumber of your appliance. Thes...

DA 200-2, DA 200-2 EXT a Drill holes for fixing to the ceiling with C 8 mm screws b Alternative positions for feeding through the mains supply cable c Cut-out for feeding connection cable through to an external fan, min. 65 x 30 mm d Ventilation stub C 150 mm Appliance dimensions 22

Danger of toxic fumes. Please heed the "Warning andSafety instructions" to avoid the dan-ger of toxic fumes. The cooker hood should be installedaccording to local building regula-tions. Seek approval from the build-ing inspector where necessary. – All ducting, pipework and fittings must be o...

Important: If the exhaust ducting is to run throughrooms, ceiling space etc. where theremay be great variations in temperaturebetween the different areas, the prob-lem of sweating or condensation willneed to be addressed. The exhaustducting will need to be suitably insu-lated. Condensate trap In add...

All electrical work should be under-taken by a suitably qualified andcompetent person in strict accor-dance with national and local safetyregulations.Installation, repairs and other workby unqualified persons could bedangerous. The manufacturer cannot be held responsible for un-authorised work.Ensur...

Rated loadDA 200-2, 210-2, 220-2 . . . . . . . 280 W Lighting . . . . . . . . . . . . . . . . . . 4 x 20 W VoltageUK, IRL, NZ . . . . . . . . . . . . . . . . . 230 VAUS . . . . . . . . . . . . . . . . . . . . . . . 240 V Frequency . . . . . . . . . . . . . . . . . ~ 50 Hz Fuse rating (UK) . . . . . ...