Miele DA 289-3 - Manual

Installation , WARNING To reduce the risk of fire, use only metal ductwork. When installing the hood, makesure that a minimum safety dis- tances of 14 3 / 8 " is maintained between a Miele cooktop and the bottom of thehood. If local building codes require a greatersafety distance, follow their r...

The ventilation hood works by air ex-traction. The air is drawn in through theair intake panel, cleaned by the greasefilter and directed outside.The hood comes equipped with a non-return flap . This flap automatically closes when the hood is turned off sothat no exchange of outside air androom air c...

Main power switch ^ Remove the air intake panel to ac-cess the main power switch (see"Cleaning and Care"). ^ Press the main power switch to "I".The fan and lighting are ready to use. If the appliance is not going to be usedfor a long period of time (e.g. while va-cationing) it should...

Delayed Shut Down If odors or smoke remain in the kitchenafter cooking has been completed, theDelayed Shut Down feature can be se-lected to allow the hood to continuerunning for either 5 or 15 minutes. ^ Press the Delayed Shut Down buttonwhile the fan is still running. Press once = 5 minute delay (l...

Grease filter timer A timer monitors the hours of fan opera-tion. The indicator for the grease filterwill light after 30 hours of operation. Thegrease filter and air intake panel mustthen be cleaned. After the grease filter has been cleanedand put in place, the grease filter timermust be reset. ^ To...

Grease filter and air intakepanel The reusable metal grease filter re-moves solid particles from the ventedkitchen air (grease, dust, etc). The grease filter and the air intakepanel should be cleaned every 3 - 4weeks or whenever the grease filter in-dicator lights. Keep the grease filter clean to pr...

^ Clean the filter- by hand: use a scrub brush in warm water with a mild detergent.- in a dishwasher: place the filters in the lower basket, making sure thatthe spray arm is not blocked. Depending on the detergent, clean-ing the grease filter in a dishwashermay cause permanent discolorationof the fi...

Before cleaning or servicing thehood, disconnect it from the powersupply by either removing the fuse,unplugging it from the outlet or man-ually "tripping" the circuit breaker. Cleaning the casing , Never use abrasive cleaners, scouring pads, steel wool or caustic(oven) cleaners on the hood. ...

Changing the light bulbs Before changing the light bulbs, dis-connect the hood from the powersupply by either removing the fuse,unplugging it, or manually "tripping"the circuit breaker. When in use halogen bulbs becomeextremely hot, and they can burnyour hands. Do not attempt tochange the bu...

In the event of a fault which you cannotcorrect yourself please contact: – Your Miele Dealer or – The Miele Technical Service Department USA [email protected] CDN [email protected] When contacting the Technical ServiceDepartment, please quote the modeland serial number...

Disposal of packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Please recycle. Ensure that any plastic wrappings,bags etc. are disposed of safely andkept out of the reach of children.Danger of suffoc...

The majority of the weight of the in-stalled ventilation system will besupported by the lower retainingplate. It must be firmly attached tothe stud framing behind the drywall.If studs are not available in the re-quired locations, a plywood backing(min. 1 / 2 " (13 mm) thick) spanning at least tw...

All electrical work should be per-formed by a qualified electrician instrict accordance with national andlocal safety regulations.Installation, repairs and other workby unqualified persons could bedangerous. The manufacturer cannot be held responsible for unautho-rized work.Ensure that power to the ...

Cut out area in wall or ceiling forentrance of 6" (150 mm)ductwork or 5" (125 mm) ductwork with a reducing collar. Standard unit height H = 37 13 / 16 " - 51 15 / 16 " (960 – 1320 mm) Distance S above the cooktop Do not install this exhaust hood overcooktops burning solid fuel. When ...

, WARNING Danger of toxic fumes. Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled. The exhaust gases extracted bythe hood should be vented out-side of the building only. Do not terminate the exhaustducts in attics, garages,crawlspaces, etc. To reduce the risk of f...

– If the exhaust is ducted into an inac- tive flue, the air must be expelledparallel to the flow direction of theflue. Never connect an exhaust hood toan active chimney, dryer vent, ventflue, or room venting ductwork. Seekprofessional advice before connect-ing an exhaust hood vent to an exist-ing, i...