Miele DA2210 - Manual

Installation ~ , WARNING To reduce the risk of fire only usemetal ductwork. ~ Provided a larger distance is not given by the manufacturer of thecooktop, follow the minimum safetydistances between a cooktop and thebottom of the hood: – 22" (550 mm) above electric cooktops, – 30" (762 mm) abov...

The ventilation hood offers two modesof operation: Air extraction The air is drawn in and cleaned by thegrease filters and directed outside. The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off sothat no exchange of outside air androom air can oc...

Joystick The joystick controls the fan power andoverhead lighting. Turning on the fan ^ Press the joystick once to the right. The fan runs at power level "2" and thesecond indicator of the fan power scalelights. Selecting the power level ^ Press the joystick to the right, toincrease the fan ...

Automatically switching back to the"Intensive" setting The intensive level "4" can beprogrammed to automatically switchback to level "3" after 10 minutes. ^ Turn the fan and the lights off. ^ Press and hold the Delay Shut Downbutton for 10 secs. The first indicatorof the fan ...

Filter timers Grease filter timer A timer monitors the hours of operation.The indicator for the grease filter willlight after 30 hours of fan operation. Thegrease filters must then be cleaned. After the grease filters have beencleaned and put back in place, thegrease filter timer must be reset. ^ To...

Reprogramming the timers The grease filter timer is preset to 30hours. This time can be lengthened orshortened to 20, 30, 40 or 50 hours. – A time of 20 hours should be programmed in kitchens withfrequent pan or deep frying. – A time of 20 hours should also be programmed if the kitchen is onlyused o...

Reprogramming the charcoal filtertimer The active charcoal filters can only beused in recirculation mode and cannotbe used to exhaust fumes. The charcoal filter timer is not preset . Before using the hood in recirculationmode, the charcoal filter timer must beprogrammed. ^ Press the joystick to the ...

Before cleaning or servicing thehood, disconnect it from the powersupply by either removing the fuse,unplugging it from the outlet ormanually "tripping" the circuitbreaker. Cleaning the casing Warning: Never use abrasivecleansers, scouring pads, steel woolor caustic (oven) cleaners on thehoo...

Cleaning the grease filters ^ By hand: use a scrub brush with a solution of warm water and milddetergent.Do not use pure detergent,aggressive all purpose cleaners,oven sprays or limescale removers.They could destroy the filters. ^ In a dishwasher: place the filters vertically in the lower basket, ma...

Active charcoal filter DA 2280 uses 2 active charcoal filtersDA 2210 uses 4 active charcoal filters In recirculation mode active charcoalfilters must be used in addition to thegrease filters. It is designed to absorbcooking odors.The active charcoal filters will bereplaced in the canopy above thegre...

Changing the light bulb Before changing the light bulb,disconnect the hood from the powersupply by either removing the fuse,unplugging it, or manually "tripping"the circuit breaker. When in use halogen bulbs becomeextremely hot, and they can burnyour hands. Do not attempt tochange the bulbs ...

Repairs In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department. ^ When contacting the TechnicalService Department, please quotethe model and serial number of yourappliance. These are shown on the data platewhich is visible when the grease fi...

Disposal of packing material The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable.Please recycle. To prevent suffocation of children,ensure that any plastic wrappings,bags, etc. are disposed of safelyand kept out of th...

All electrical work should beperformed by a qualified electricianin strict accordance with nationaland local safety regulations.Installation, repairs and other workby unqualified persons could bedangerous. The manufacturercannot be held responsible forunauthorized work.Ensure that power to the appli...

Important The hood comes equipped with a 4 ft(1.2 m) power cord with a NEMA 5-15molded plug for connection to a120 VAC, 60 Hz, 15 A power outlet. DA 2280 Maximum load . . . . . . . . . . . . . . . 450 W Fan. . . . . . . . . . . . . . . . . . . . . . . 350 WLight . . . . . . . . . . . . . . . . . . ....

*Cut out dimensions A depth T , min. 1" (25 mm), is necessary in the rear of the cabinet. Distance between cooktop and hood Do not install this exhaust hood overcooktops burning solid fuel. Provided a larger distance is notgiven by the manufacturer of thecooktop, follow the minimum safetydistanc...

Non-return flap The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off sothat no exchange of outside air androom air can occur. Uninstall the non-return flap when yourexhaust system is equipped with anon-return flap or if the hood is used inrecircu...

Reducing collar ^ DA 2280: The hood is designed for use with a 6" (150 mm) diameterexhaust hose.If using 5" (125 mm) ducting, placethe supplied reducing collar into theexhaust connection (see "Airextraction"). ^ DA 2210: The hood has two exhaust connections for use with two 6"(15...

Electrical connection Before connecting the appliance topower read the "Important SafetyInstructions". ^ Plug in the power cord. Before using the appliance remove thegrease filters and remove the protectivefoil from the filter frame. Insert thegrease filters back into place. Installation 32

– If the exhaust is ducted into an inactive flue, the air must be expelledparallel to the flow direction of theflue. Never connect an exhaust hood toan active chimney, dryer vent, flue,or room venting ductwork. Seekprofessional advice beforeconnecting an exhaust hood vent toan existing, inactive chi...