Page 2 - PRODUCT FEATURES
2 PRODUCT FEATURES PRODUCT FEATURES DIRECT DRIVE SYSTEM The advanced brushless DC motor drives the drum directly without using a belt and pulley. TILTED DRUM AND EXTRA LARGE DOOR OPENING The tilted drum and extra large opening make it possible to load and unload clothing more easily. ULTRA CAPACITY ...
Page 3 - ENGLISH; IMPORTANT SAFETY INSTRUCTIONS; READ ALL INSTRUCTIONS BEFORE USE; WARNING; Your Safety and the safety of others are very important.; DANGER; Technical Safety
3 IMPORTANT SAFETY INSTRUCTIONS ENGLISH IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. Your ...
Page 4 - BASIC SAFETY PRECAUTIONS
4 IMPORTANT SAFETY INSTRUCTIONS • Before use, the washer must be properly installed as described in this manual. • Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they giv...
Page 5 - GROUNDING INSTRUCTIONS
5 IMPORTANT SAFETY INSTRUCTIONS ENGLISH GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an eq...
Page 6 - SAFETY INSTRUCTIONS FOR INSTALLATION
6 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRU...
Page 8 - DISPOSAL; SAVE THESE INSTRUCTIONS
8 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE WARNING For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRU...
Page 9 - TABLE OF CONTENTS
TABLE OF CONTENTS 9 2 PRODUCT FEATURES 3 IMPORTANT SAFETY INSTRUCTIONS 4 IMPORTANT SAFETY INSTRUCTIONS 4 BASIC SAFETY PRECAUTIONS 5 GROUNDING INSTRUCTIONS 6 IMPORTANT SAFETY INSTRUCTIONS 6 SAFETY INSTRUCTIONS FOR INSTALLATION 8 IMPORTANT SAFETY INSTRUCTIONS 8 SAFETY INSTRUCTIONS FOR USE, CARE, CLEAN...
Page 10 - PARTS AND ACCESSORIES; Parts
10 PARTS AND ACCESSORIES PARTS AND ACCESSORIES Parts Detergent Detergent dispenser dispenser (for single (for single model) model) Detergent Detergent dispenser drawer dispenser drawer (for stack model) (for stack model) Control Control panel panel Power cord Power cordDrain hose Drain hose Door sea...
Page 11 - CONTROL PANEL FEATURES
11 CONTROL PANEL FEATURES ENGLISH CONTROL PANEL FEATURES Coin type (TCWM2013QS3) Coin type (TCWM2013QD3) Card / OPL Type (TCWM2013CS3/TCWM2013CD3) a a Display LED Display LED b b Cycle button Cycle button c c Optional function button Optional function button d d Start/Pause button Start/Pause button...
Page 12 - Hot; Optional function button
12 CONTROL PANEL FEATURES Status LED Status LED Display LED Display LED Cycle button Cycle button Start/Pause button Start/Pause button Optional function button Optional function button Display LED The display shows the vend price and remaining time and programming options. Error codes are also disp...
Page 13 - INSTALLATION INSTRUCTIONS; Checking and choosing the; Space requirements; Installing on a floor
13 INSTALLATION INSTRUCTIONS ENGLISH INSTALLATION INSTRUCTIONS Checking and choosing the proper location Install the washing machine on a solid concrete cement that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the fl...
Page 14 - Installing Hole cap
14 INSTALLATION INSTRUCTIONS Unpacking and removing shipping bolts When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base. If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side.DO N...
Page 15 - Connecting the water lines
15 INSTALLATION INSTRUCTIONS ENGLISH Connecting the water lines 1 Check the rubber seals on both sides of the hose. − Insert a rubber seal into the threaded fittings on each hose to prevent leaking. 2 Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten a...
Page 16 - Connecting the drain line; Using a standpipe; Connecting the auto dosing
16 INSTALLATION INSTRUCTIONS Connecting the drain line Secure the drain hose in place to prevent moving and leaking. NOTE • The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction. • Total height of the hose end should not exceed 10...
Page 17 - Leveling the washing
17 INSTALLATION INSTRUCTIONS ENGLISH Leveling the washing machine The washer tub of your new washing machine spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be perfectly level and solid. 1 Check the washing machine’s level. − Check the precise level by ...
Page 18 - PREPARATION; Precautions for fabric care before wash cycle
18 PREPARATION PREPARATION Precautions for fabric care before wash cycle Read and observe the following to prevent shrinkage or damage to clothes. • Check all pockets to make sure that they are empty. − Items such as clips, matches, pens, coins, and keys can damage both your washer and your clothes....
Page 19 - Fabric care labels
19 PREPARATION ENGLISH Fabric care labels Most articles of clothing feature fabric care labels that include instructions for proper care. Category Label Directions Washing Hand WashMachine Wash, Normal CycleUse Permanent Press/ Wrinkle Resistant washing machine setting (which has a cool down or cold...
Page 20 - Laundry loading guide; Recommended detergent; About the dispenser
20 PREPARATION Laundry loading guide Loading your laundry following the below guide will help to increase the lifetime and wash performance of the washer. • Single items or mixed items that include large items should be less than half of the maximum capacity(dry condition). − Single items : Consists...
Page 21 - Loading the dispenser; Main Wash Detergent Compartment; Liquid Bleach Compartment; Fabric Softener Compartment
21 PREPARATION ENGLISH Loading the dispenser Main Wash Detergent Compartment This compartment holds laundry detergent for the main wash cycle, which is added to the load at the beginning of the cycle.Follow the detergent manufacturer’s instructions with respect to the amount of detergent to use, and...
Page 22 - OPERATING YOUR WASHER
22 OPERATING YOUR WASHER OPERATING YOUR WASHER 1 Ready mode − All types of machines show ‘PUSH’ NOTE • Price setting varies by country • Set your country from mode • After EEPT, reset your country (Default country is USA) 2 Select the cycle Press the desired button and the display will show you the ...
Page 23 - PROGRAMMING MODE; How to enter Programming mode:
23 PROGRAMMING MODE ENGLISH PROGRAMMING MODE : You can check machine information or change setting on Program setup, collect information data, Diagnostic test.There are two methods that you can enter programming mode. How to enter Programming mode: • Coin type – Turn on/off the toggle switch. • Card...
Page 24 - Structure of Programming mode – Coin / Card type
24 PROGRAMMING MODE Structure of Programming mode – Coin / Card type Algorithm flow chart shows how to control the programming mode. Before program set, check the structure of the programming mode. 1 Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instr...
Page 25 - Structure of Programming mode – OPL type
25 PROGRAMMING MODE ENGLISH Structure of Programming mode – OPL type Algorithm flow chart shows how to control the programming mode. Before program set, check the structure of the programming mode. 1 Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instr...
Page 26 - PROGRAMING MODE – SETUP MODE; Regular Price Setup
26 PROGRAMING MODE – SETUP MODE NOTE • Range : 0.00~9.95 • Increments : 0.05 • ALL is to select the default prices for all the courses at once. • Select individual price for COS1~6. • COS1 : Hot • COS2 : Warm • COS3 : Cold • COS4 : Delicates • COS5, COS6 : Heater model only * Individual course price...
Page 27 - Special Price Setup
27 PROGRAMING MODE – SETUP MODE ENGLISH 2. Special Price Setup How to set special prices for all/each course. Special Price Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the setting you wa...
Page 28 - Add Super Wash Price Setup
28 PROGRAMING MODE – SETUP MODE 3. Add Super Wash Price Setup How to set Add Super Wash Price. * Add Super Wash is used to add extra wash, rinse, or both (only in Pay type). Add Super Wash Price Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd...
Page 29 - Auto Dosing Price Setup
29 PROGRAMING MODE – SETUP MODE ENGLISH 4. Auto Dosing Price Setup How to set Auto Dosing Price. * Auto dosing is used to inject detergent/chemicals using external pumps (only in Pay type). Auto Dosing Price Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd ...
Page 31 - Special Price Day Setup
31 PROGRAMING MODE – SETUP MODE ENGLISH 5-1. Special Price Day Setup Special Price Day Setup can be used to enable/disable the use of special prices. Special Price Day Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows...
Page 32 - Easy Entry Payment Cycle Kill Setup
32 PROGRAMING MODE – SETUP MODE 5-2. Easy Entry Payment Cycle Kill Setup Easy entry cycle kill can be enabled or disabled in the payment cycle Easy Entry Payment Cycle Kill Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display ...
Page 33 - Max RPM Limit Setup
33 PROGRAMING MODE – SETUP MODE ENGLISH 5-3. Max RPM Limit Setup Max RPM Limit Setup can be used to enable/disable the ability to limit the max RPM during spin process. Max RPM Limitation Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button...
Page 34 - Twin Spray Setup
34 PROGRAMING MODE – SETUP MODE 5-4. Twin Spray Setup Twin Spray Setup can be used to enable/disable water circulation during tumble. Twin Spray Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start button Pre...
Page 35 - Pause Function Setup
35 PROGRAMING MODE – SETUP MODE ENGLISH 5-5. Pause Function Setup Pause Function Setup can be used to enable/disable the ability to pause the cycle when pressing the start/pause button. Pause Function Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button ...
Page 37 - th Button Type Setup
37 PROGRAMING MODE – SETUP MODE ENGLISH 6-1. 5th Button Type Setup 5th Button Type Setup can be used to set the function of the 5th button. 5th Button Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start...
Page 38 - Add Super Wash Setup
38 PROGRAMING MODE – SETUP MODE 6-2. Add Super Wash Setup Add Super Wash Setup can be used to enable/disable the super wash function. * Add Super Wash is used to add extra wash, rinse, or both (only used in Pay type). Add Super Wash Setup Display Enter SVC mode Press 1st button Press 2nd button Pres...
Page 39 - Auto Dosing Setup
39 PROGRAMING MODE – SETUP MODE ENGLISH 6-3. Auto Dosing Setup Auto Dosing Setup can be used to enable/disable the Auto dosing function. Auto Dosing Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start button...
Page 40 - Add Super Wash Type Setup
40 PROGRAMING MODE – SETUP MODE 6-4. Add Super Wash Type Setup Add Super Wash Type Setup can be used to add extra wash cycle, rinse cycle, or both. Add Super Wash Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows...
Page 41 - Tub Clean Load Detection Setup
41 PROGRAMING MODE – SETUP MODE ENGLISH 6-5. Tub Clean Load Detection Setup Tub Clean Load Detection Setup can be used to enable/disable the ability to detect laundry load during tub clean. If enabled, the washer will detect whether or not a load is present in the washer. Tub Clean Load Detection Se...
Page 42 - Tub Clean Heater Setup
42 PROGRAMING MODE – SETUP MODE 6-6. Tub Clean Heater Setup Tub Clean Heater Setup can be used to enable/disable the ability to use the heater during tub clean. If enabled, the heater will be used for the tub clean. Tub Clean Heater Setup Display Enter SVC mode Press 1st button Press 2nd button Pres...
Page 43 - Tub Clean Button Setup
43 PROGRAMING MODE – SETUP MODE ENGLISH 6-7. Tub Clean Button Setup Tub Clean Button Setup can be used to enable/disable the easy entry function for the new tub clean Tub Clean Button Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Unt...
Page 45 - Spin Type Setup
45 PROGRAMING MODE – SETUP MODE ENGLISH 7-1. Spin Type Setup Spin Type Setup can be used to select spin type between multi-housing type and coin laundry type. Spin Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display show...
Page 46 - Spin Only Easy Entry Setup
46 PROGRAMING MODE – SETUP MODE 7-2. Spin Only Easy Entry Setup Spin Only Easy Entry Setup can be used to enable/disable the easy entry function for the spin only. Spin Only Easy Entry Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Un...
Page 48 - Pre clean entry button setup
48 PROGRAMING MODE – SETUP MODE 7-4. Pre clean entry button setup Pre clean entry button setup can be used to enable/disable button that entry short tub clean cycle. Pre Clean Entry Button Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd butto...
Page 50 - Wave Force Setup
50 PROGRAMING MODE – SETUP MODE 7-6. Wave Force Setup Wave Force Setup can be used to enable/disable the wave force. Wave Force Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start button Press 2nd button or ...
Page 52 - Special Price Beginning Time Setup
52 PROGRAMING MODE – SETUP MODE 9. Special Price Beginning Time Setup Special Price Beginning Time Setup can be used to set the start time of special prices. Special Price Beginning Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button ...
Page 53 - Special Price Ending Time Setup
53 PROGRAMING MODE – SETUP MODE ENGLISH 10. Special Price Ending Time Setup Special Price Ending Time Setup can be used to set the end time for special prices. Special Price Beginning Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd butto...
Page 54 - Prewash Time Setup
54 PROGRAMING MODE – SETUP MODE 11. Prewash Time Setup Prewash Time Setup can be used to set the time for prewash. Prewash Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the setting yo...
Page 55 - Wash Time Setup
55 PROGRAMING MODE – SETUP MODE ENGLISH 12. Wash Time Setup Wash Time Setup can be used to set the duration of the wash process. Wash Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the...
Page 56 - Number of Rinses per Cycle Setup
56 PROGRAMING MODE – SETUP MODE 13. Number of Rinses per Cycle Setup Number of Rinses per Cycle Setup can be used to set number of rinses for one cycle. Number of Rinses per Cycle Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until d...
Page 57 - Rinse Time Setup
57 PROGRAMING MODE – SETUP MODE ENGLISH 14. Rinse Time Setup Rinse Time Setup can be used to set the duration of one rinse. Rinse Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the set...
Page 58 - Top Spin Speed Setup
58 PROGRAMING MODE – SETUP MODE 15. Top Spin Speed Setup Top Spin Speed Setup can be used to set the maximum RPM for the spin process. Top Spin Speed Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start butto...
Page 59 - Water Level Setup
59 PROGRAMING MODE – SETUP MODE ENGLISH 16. Water Level Setup Water Level Setup can be used to set the water supply level. Water Level Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the set...
Page 60 - Rinse Spin Setup
60 PROGRAMING MODE – SETUP MODE 17. Rinse Spin Setup Rinse Spin Setup can be used to enable/disable spin during rinse cycle. Rinse Spin Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect the se...
Page 61 - Drop Count Setup
61 PROGRAMING MODE – SETUP MODE ENGLISH 18. Drop Count Setup Drop Count Setup can be used to set the number of drop counts. Drops occur while the machine checks for balancing of the load as the cycle enters higher RPM. Drop Count Setup Display Enter SVC mode Press 1st button Press 2nd button Press s...
Page 62 - Rinse Spin Drop Count Setup
62 PROGRAMING MODE – SETUP MODE 19. Rinse Spin Drop Count Setup Rinse Spin Drop Count Setup can be used to set the drop count for each rinse spin. Drops occur while the machine checks for balancing of the load as the cycle enters higher RPM. Rinse Spin Drop Count Setup Display Enter SVC mode Press 1...
Page 63 - UE Shutdown Setup
63 PROGRAMING MODE – SETUP MODE ENGLISH 20. UE Shutdown Setup UE Shutdown Setup can be used to set the time to display UE until the cycle ends. UE Shutdown Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start...
Page 64 - Auto Dosing Pump Time Setup
64 PROGRAMING MODE – SETUP MODE 21. Auto Dosing Pump Time Setup Auto Dosing Pump Time Setup can be used to set the pump activation duration for each channel per course. Auto Dosing Pump Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd but...
Page 65 - Coin 1 Value Setup
65 PROGRAMING MODE – SETUP MODE ENGLISH 22. Coin 1 Value Setup Coin 1 Value Setup can be used to set the value of each coin signal received. Coin1 Value Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start bu...
Page 66 - Penny Increment Pricing Offset Setup
66 PROGRAMING MODE – SETUP MODE 23. Penny Increment Pricing Offset Setup Penny Increment Pricing Offset Setup can be used to set additional cent increase when card is used. Penny Increment Pricing Offset Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd butt...
Page 67 - Beep Volume Setup
67 PROGRAMING MODE – SETUP MODE ENGLISH 24. Beep Volume Setup Beep Volume Setup can be used to set the sound level of the machine. Beep Volume Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press start buttonSelect...
Page 68 - Standby Return Time Setup
68 PROGRAMING MODE – SETUP MODE 25. Standby Return Time Setup Standby Return Time Setup can be used to set how long the input payment is held until the machine resets to standby mode. Standby Return Time Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd butt...
Page 69 - Type
69 PROGRAMING MODE – SETUP MODE ENGLISH 26. Type Type can be used to set the machine’s various type settings. Type Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Select the setting you want Button functions: Start button...
Page 70 - Product Type Setup
70 PROGRAMING MODE – SETUP MODE 26-1. Product Type Setup Product Type Setup can be used to set the machine’s payment type (Pay or Free) Product Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start button...
Page 71 - Currency Type Setup
71 PROGRAMING MODE – SETUP MODE ENGLISH 26-2. Currency Type Setup Currency Type Setup can be used to set the country and its currency Currency Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start button ...
Page 72 - Vend Type Setup
72 PROGRAMING MODE – SETUP MODE 26-3. Vend Type Setup Vent Type Setup can be used to set the payment type (Coin/Card). Vend Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start button Press 2nd button or...
Page 73 - Card Reader Type Setup
73 PROGRAMING MODE – SETUP MODE ENGLISH 26-4. Card Reader Type Setup Card Reader Type can be used to set the card reader company. Card Reader Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start button P...
Page 74 - Coin Drop Type Setup
74 PROGRAMING MODE – SETUP MODE 26-5. Coin Drop Type Setup Coin Drop Type can be used to set the coin pulse signal setting for coin drops. Coin Drop Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start b...
Page 75 - Heater type setup
75 PROGRAMING MODE – SETUP MODE ENGLISH 26-6. Heater type setup Heater type setup can be used to set machine’s tool(heater/non heater). Heater Type Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start button ...
Page 76 - Max Surpassed Cycle Time Setup
76 PROGRAMING MODE – SETUP MODE 27. Max Surpassed Cycle Time Setup Cut off time is how long the machine can run after the display time has been reached. This feature allows the adjustment of the cut off time between 1 and 15 minutes. Max Surpassed Cycle Time Setup Display Enter SVC mode Press 1st bu...
Page 77 - Custom Program Setup
77 PROGRAMING MODE – SETUP MODE ENGLISH 28. Custom Program Setup Custom Program can be used to create up to 20 different customized courses. Custom Program Setup Display Enter SVC mode Press 1st button Press 2nd button Press start button Press 2nd button or 3rd button Until display shows Press Start...
Page 78 - Programing Mode – Test Mode; Test
78 Programing Mode – Test Mode Programing Mode – Test Mode Diagnostic tests: (display) This program has been added for testing the washer and detecting errors. How to enter Programming mode: • Coin type – Turn on/off the toggle switch. • Card type – Insert the service card. • All types – 1 Press the...
Page 79 - Diagnostic Test
79 Programing Mode – Test Mode ENGLISH 2. Diagnostic Test Diagnostic Test can be used to check functionality of various machine parts. Press Start to move through the check points. Number of times the Start button is pressed Check point Display 0 Enter SVC mode 1 Turns on all lamps and locks the doo...
Page 80 - Factory Reset
80 Programing Mode – Test Mode 3. Factory Reset Factory Reset is used to reset the machine to default settings. Factory Reset Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Press 2nd button Until display shows Press Start button NOTE • All settings retur...
Page 81 - Time Setup
81 Programing Mode – Test Mode ENGLISH 4. Time Setup Time Setup can be used to set the current year, month, day, hour, and minute. Time Setup Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Display shows you 2000(Year) → 0101(Month/ Date) → Sat(Day) → 000...
Page 82 - Courtesy Cycle
82 Programing Mode – Test Mode 5. Courtesy Cycle Courtesy Cycle is a free cycle given to customers for Pay Type machines. Courtesy Cycle Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Press 2nd button Until display shows Press Start button Machine is rea...
Page 83 - Kill Cycle
83 Programing Mode – Test Mode ENGLISH 6. Kill Cycle Kill Cycle is used to end the currently operating cycle. Cycle Kill Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Press 2nd button Until display shows Press Start button Machine is ready to use.User c...
Page 84 - Password Setup
84 Programing Mode – Test Mode 7. Password Setup Password Setup can be used to change the password to enter Service mode. Password Setup Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Button functions: Start button = Select 1st button = Go back a step 2n...
Page 85 - Tub Clean Course
85 Programing Mode – Test Mode ENGLISH 8. Tub Clean Course Tub Clean Course is used to clean the drum. Tub Clean Course Display Enter SVC mode Press 2nd button or 3rd button Until display shows Press Start button Display shows remaining time and starts the Tub Clean Course. NOTE • Machine goes back ...
Page 86 - Programing Mode – Collect Mode; Collect information data :; Collect Mode
86 Programing Mode – Collect Mode Programing Mode – Collect Mode Collect information data : (display) The washer collects the usage data so that the owner can check various information like number of various cycles used, how many times card or coins used, etc. Collect Mode Collect Mode Display Enter...
Page 87 - Collect Mode Data lists
87 Programing Mode – Collect Mode ENGLISH Collect Mode Data lists No. Abbreviation Meaning Description 1 rgPr Regular Price (Default Price) 2 rgP1 Regular COS1 Price 3 rgP2 Regular COS2 Price 4 rgP3 Regular COS3 Price 5 rgP4 Regular COS4 Price 6 rgP5 Regular COS5 Price (for Heater) 7 rgP6 Regular CO...
Page 88 - SMART FUNCTIONS; Wireless LAN Module
88 SMART FUNCTIONS SMART FUNCTIONS Wireless LAN Module Specifications Model LCW-004 Frequency Range 2412 MHz - 2462 MHz Output Power (Max) < 30 dBm FCC Notice The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the ...
Page 89 - MAINTENANCE; Care after wash; Storing the Washer; Cleaning the Dispenser
89 MAINTENANCE ENGLISH MAINTENANCE Care after wash After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. Leave the door open to dry the washer tub interior. Wipe the body of the washing machine with a dry cloth to remove any moisture WARNING • Unplug the ...
Page 90 - Cleaning the water inlet filters
90 MAINTENANCE Cleaning the water inlet filters Clean the water inlet filters periodically to prevent clogging. Take extra care to clean the water inlet filters for areas using hard water. Water may not be supplied if there are foreign objects, such as rust, sand, or stones in the water inlet filter...
Page 91 - Cleaning the Drain Pump Filter
91 MAINTENANCE ENGLISH Cleaning the Drain Pump Filter The washing machine fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects. 1 Pull out the plug to turn off the washing machine. 2 Open the drain pump filter cover. 3 Uncli...
Page 92 - Cleaning the Door Seal; CAUTION; Cleaning the Drum, Tub Clean; Removing Mineral Buildup
92 MAINTENANCE Cleaning the Door Seal Clean the door seal once a month to prevent build- up of dirt in the door seal. 1 Wear rubber gloves and protective goggles. 2 Dilute 3/4 cup (177 ml) of liquid chlorine bleach in 1 gallon (3.8 L) of water. 3 Soak a sponge or a soft cloth in this diluted solutio...
Page 93 - ERROR MODE
93 ERROR MODE ENGLISH ERROR MODE Meaning of Error Codes that LED displays during occurrence of problem. Problem Possible Cause Solution • Water supply is not adequate in area. • Water supply taps are not completely open. • Water inlet hose is bent. • The filter of the inlet hose clogged. Check anoth...
Page 94 - SPECIFICATIONS
94 POWER FAIL RECOVERY POWER FAIL RECOVERY In case of power failure, the machine stops running but the time display remains on, showing the time just before power failure. DEFAULT WASHER SETTINGS Default Settings Default Wash Time 8 Minutes Rinse Time 17 Minutes Spin Time 11 Minutes Rinsing times Tw...
Page 95 - MEMO
