Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; How to forcibly eject a disc
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT2. CAUTION: Do not open the top cover. Ther...
Page 3 - Caution on volume setting:
3 ENGLISH This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise a...
Page 4 - How to read this manual; How to use the M MODE button
4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand:• Some related tips and notes are explained in “More about this receiver” (see pages 53 – 57). • Button operations are mainly explained with the illustrations as follows: Press bri...
Page 5 - Contents; Introduction —; Playable discs; Remote controller —; Searching for your favorite FM RDS
5 ENGLISH DVD setup menu ............................ 29 Basic setting procedure .......................... 29 Other disc operations ..................... 32 Basic operations ..................................... 32Changing the display information ......... 33Selecting the playback modes ..............
Page 6 - Introduction — Playable discs; Discs you can play
6 ENGLISH Introduction — Playable discs Discs you can play You can play back the following discs (12 cm and 8 cm) on this receiver:• DVD Video: Recorded in PAL color system with Region Code “2” (see below). – DVD-R/DVD-RW recorded in the DVD- Video format can also be played (see page 54). • Video CD...
Page 7 - Control panel; Parts identification; Display window
7 ENGLISH Control panel 1 5 (up) / ∞ (down) buttons • Function as Play / Stop buttons for DVD and VCDs. 2 T/P TP/PTY (traffic programme/programme type) button 3 D DISP (display) button 4 S SEL (select) button 5 • Control dial • (standby/on attenuator) button 6 Display window 7 0 (eject) button 8 Rem...
Page 8 - Installing the lithium coin battery; Before using the remote controller:; Main elements and features
8 ENGLISH Remote controller — RM-RK230 Installing the lithium coin battery (CR2025) Before using the remote controller: • Aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunl...
Page 9 - How to select a number
9 ENGLISH 5 TOP M (menu) button* 2 • Display the DVD and VCD* 3 disc menu. 6 DUAL button • Activate and deactivate Dual Zone. 7 VOL + / – buttons • Adjusts the volume level. • Also function as 2nd VOL +/– buttons when pressed with SHIFT button. 8 SETUP button* 2 9 SHIFT button p Basic disc operation...
Page 10 - For FM/AM tuner only; Adjust the sound as you want.; To turn off the power; Getting started; Basic operations
10 ENGLISH ~ Ÿ You cannot select some sources if they are not ready. ! For FM/AM tuner only For DAB tuner only ⁄ Adjust the volume. Volume level appears. Volume level indicator @ Adjust the sound as you want. (See pages 36 – 38.) To drop the volume in a moment (ATT) To restore the sound, press it ag...
Page 11 - Canceling the display; Finish the procedure.; To activate the display demonstration; Setting the clock; Set the hour and minute.
11 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 39. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select...
Page 12 - To tune in to a station manually; Radio operations; Listening to the radio; Start searching for a station.
12 ENGLISH To tune in to a station manually In step ! on the left column... 1 2 Select the desired station frequencies. Radio operations Listening to the radio ~ Ÿ Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength. ! Start searching for a station....
Page 13 - Storing stations in memory; FM station automatic presetting —; you want to store into.
13 ENGLISH When an FM stereo broadcast is hard to receive 1 2 Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can p...
Page 14 - Manual presetting; Listening to a preset station; or
14 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. 1 2 3 4 Preset number flashes for a while. To check the current clock time while listening to an FM (non-RDS) or AM station • For FM RDS stations, see page 17. Listening to a preset station 1 2...
Page 15 - FM RDS operations; Searching for your favorite FM RDS programme; Select one of your favorite; PTY codes
15 ENGLISH FM RDS operations Searching for your favorite FM RDS programme You can tune in to a station broadcasting your favorite programme by searching for a PTY code.• To store your favorite programme, see page 16. ~ The last selected PTY code appears. Ÿ Select one of your favorite programme type....
Page 16 - What you can do with RDS; Storing your favorite programmes; TA Standby Reception
16 ENGLISH What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals.By receiving the RDS data, this receiver can do the following: • Programme Type (PTY) Search (see page 15) • Temporarily switches to Traffic Announce...
Page 17 - Tracking the same programme—; PTY Standby Reception
17 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustra...
Page 18 - Disc operations; Playing a disc in the receiver
18 ENGLISH Before performing any operations, make sure the following.... • Turn on the monitor for playing a DVD or VCD. If you turn on the monitor, you can also control the audio CD, CD Text, and MP3/WMA playback by referring to the monitor screen. (See pages 27 and 28.) • For DVD playback, you can...
Page 19 - To eject the disc
19 ENGLISH • When inserting a DVD disc: • When inserting an MP3/WMA disc: * 1 Either the MP3 or WMA indicator lights up depending on the detected file. * 2 Does not light up for DVD-R/DVD-RW. • When inserting a VCD: • When inserting a CD Text/audio CD: To eject the disc Total folder number Total tra...
Page 20 - Operations
20 ENGLISH Basic operations Operations Display indication and/or next operation To stop play temporarily “PAUSE” illuminates on the display. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback.• When playing a VCD, Reverse Slow M...
Page 21 - To locate a title/folder
21 ENGLISH To locate a particular title/chapter/track directly • For DVD: During play or pause—select a chapter. During stop—select a title. • For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder. Select the number corresponding to the item you want (s...
Page 22 - DVD/VCD special functions; Selecting subtitles; Selecting multi-angle views
22 ENGLISH DVD/VCD special functions Selecting subtitles You can select the language of the subtitle to be shown on the monitor.• You can set the initial subtitle language using the setup menu (see page 30). Ex.: When the disc has 3 options Selecting audio languages For DVD: You can select the langu...
Page 23 - Canceling the PBC playback; Zoom in; While playing a DVD; Select the item you want on the; While playing a VCD
23 ENGLISH Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function Zoom in 1 2 Move the zoomed-in portion. To cancel zoom, select “ZOOM OFF” in step 1 . Disc menu operations Menu-driven playback is possible while playin...
Page 24 - About the On-Screen Bar; VCD
24 ENGLISH About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar.• For audio CD, CD Text, and MP3/WMA disc you can also use the control screen and list screen (see pages 27 and 28). On-Screen bars DVD DVD -V 2ch T 02 -C 03 TOTAL 1:25:58 TIME TITL...
Page 25 - To erase the on-screen bar; Basic on-screen bar operations
25 ENGLISH To erase the on-screen bar • The selectable options for Repeat/Intro/ Randam plays: OFF Repeat play DVD: OFF CHAP TITLE REPEAT Repeat play VCD (while PBC is not in use): REPEAT (Canceled) MP3/WMA: REPEAT TRACK REPEAT FOLDER (Canceled) CD Text/audio CD: REPEAT TRACK (Canceled) To be contin...
Page 26 - To change the time information
26 ENGLISH INTRO Intro play VCD (while PBC is not in use): (Canceled) INTRO MP3/WMA: INTRO TRACK INTRO FOLDER (Canceled) CD Text/audio CD: INTRO TRACK (Canceled) RANDOM Random play VCD (while PBC is not in use): (Canceled) RANDOM MP3/WMA: RANDOM DISC RANDOM FOLDER (Canceled) CD Text/audio CD: RANDOM...
Page 27 - To select a folder or track; CD Text/audio CD control; To select a track; Basic control screen operations; MP3/WMA control screen
27 ENGLISH To select a folder or track 1 Select “Folder” column or “Track” column on the control screen. 2 Select a folder or track. CD Text/audio CD control screen 1 Elapsed playing time of the current track 2 Operation mode icon ‰ (play), 7 (stop), 8 (pause), ¡ (fast- forward), 1 (reverse) 3 Curre...
Page 28 - Display the folder list.; Select a track on the list.; List screen operations; Folder/track list screens
28 ENGLISH For MP3/WMA: While stop... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list. The track list of the selected folder appears. To go back to the folder list 3 Select a track on the list. For CD Text/audio CD: Whil...
Page 29 - Basic setting procedure; Select an item you want to set up.; To set other items on the same menu; To set other items on other menus; To return to the normal screen; DVD setup menu
29 ENGLISH You can store the initial disc playback status.• While playing, no change can be made on the setup menu. Basic setting procedure While stop... 1 2 Ex.: When selecting the “AUDIO” menu 3 Select an item you want to set up. Ex.: When selecting “DOWN MIX” 4 5 Select an option. 6 To set other ...
Page 30 - LANGUAGE menu
30 ENGLISH LANGUAGE menu Item Contents MENU LANGUAGE Select the initial disc menu language. AUDIO LANGUAGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCREEN LANGUAGE Select the language for the Setup menu and some indications show...
Page 31 - AUDIO menu
31 ENGLISH AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal on the rear. For details, see page 57.• PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or con...
Page 32 - To go to the next or previous folders; Other disc operations
32 ENGLISH In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player. Basic operations To stop playback To start playback again To eject a disc To fast-forward or reverse the chapter/track Fast-forwards. Reverses. * The search speed changes to x...
Page 33 - To go to a chapter/track quickly; Prohibiting disc ejection; Changing the display information
33 ENGLISH To go to a chapter/track quickly • For DVD: During play or pause.• For VCD: While PBC (see page 23) is not in use. • For MP3/WMA: Select a track within the same folder. 1 2 First time you press 5 or ∞ button, the chapter/track skips to the nearest higher or lower chapter/track with a numb...
Page 34 - Selecting the playback modes; Select your desired playback mode.; Mode; Mode
34 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play • For DVD: During play or pause.• For VCD: While PBC (see page 23) is not in use. Ex.: When “TRK RPT” is selected while playing an MP3 disc Mode ...
Page 35 - Listening with headphones; Activate Dual Zone.; Dual Zone operations
35 ENGLISH Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear, you can listen to the playback sound through the DVD/CD player while listening to another source through the speakers.You can activate Dual Zone while listening to any source.• When Dual Zone is in u...
Page 36 - Sound adjustments; Selecting preset sound modes
36 ENGLISH Indication pattern for each sound mode: Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. ~ Ÿ Ex.: When “ROCK” is selected HIP HOP POPS ROCK USER CLASSIC JAZZ EN32-39_KD-DV6101[E]3.indd 36 EN32-39_KD-DV6101[E]3.indd 36 12/13/04 ...
Page 37 - Storing your own sound; Sound modes (preset frequency level settings); Sound mode
37 ENGLISH 4 Select a frequency to adjust. 5 Adjust the level (–05 to +05). 6 Repeat steps 4 and 5 to adjust the other frequency bands. 7 Store the adjustments in the respective mode. Storing your own sound adjustments You can adjust the sound modes and store your own adjustments in memory. 1 2 3 En...
Page 38 - Adjusting the sound; Indication
38 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “FAD” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range FAD* 1 (fader) Adjust the front and rear speaker balance. R06 (Rear only) to F06 (Front only) BAL (b...
Page 39 - General settings — PSM; Basic procedure; Indications
39 ENGLISH General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 2 Select a PSM item. Ex.: When you select “DIMMER” 3 Adjust the PSM item selected. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the p...
Page 42 - Assigning titles to the sources; To erase the entire title; Other main functions
42 ENGLISH Assigning titles to the sources You can assign titles to CDs (both in this receiver and in the CD changer). Sources Maximum number of characters DISC/CD-CH Up to 8 characters (up to 30 discs) • You cannot assign a title to a DVD, VCD, CD Text, or an MP3/WMA disc. 1 Select the source. • Fo...
Page 43 - Detaching the control panel
43 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control...
Page 44 - CD changer operations; Playing discs in the CD changer; About the CD changer
44 ENGLISH CD changer operations ~ Ÿ Select a disc. For disc number from 01 – 06: For disc number from 07 – 12: Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3-compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (ex...
Page 45 - To fast-forward or reverse the track; To skip to a track quickly during play
45 ENGLISH To be continued... To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 discs) To next folders. To pr...
Page 46 - While playing an audio CD or a CD
46 ENGLISH 2 First time you press 5 or ∞ button, the track skips to the nearest higher or lower track with a track number of multiple ten (ex. 10th, 20th, 30th).Then each time you press the button, you can skip 10 tracks.• After the last track, the first track will be selected and vice versa. 3 Chan...
Page 48 - External component operations; Playing an external component
48 ENGLISH External component operations Playing an external component You can connect an external component to the LINE IN plug on the rear and AUX (auxiliary) input jack on the control panel. • For connection, see Installation/Connection Manual (separate volume). ~ LINE IN: For selecting the exter...
Page 49 - DAB tuner operations; Listening to the DAB tuner; Start searching for an ensemble.; Select a service (either primary or; To tune in to an ensemble manually
49 ENGLISH 2 Select the desired ensemble frequencies. What is DAB system? DAB can deliver CD quality sound without any annoying interference and signal distortion. Furthermore, it can carry text, pictures, and data. When transmitting, DAB combines several programmes (called “services”) to form one “...
Page 50 - Storing DAB services in memory; Perform steps; Tuning in to a preset DAB service; Select the preset DAB service; Tracing the same programme—
50 ENGLISH Storing DAB services in memory You can preset six DAB services (primary) for each band. 1 Perform steps ~ to ⁄ on page 49, to select a service you want. 2 Select the preset number (1 – 6) you want to store into. Preset number flashes for a while. Tuning in to a preset DAB service 1 2 3 Se...
Page 51 - To keep discs clean; Maintenance; How to clean the connectors
51 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.• Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New d...
Page 52 - Language codes
52 ENGLISH Language codes Code Language Code Language Code Language AAABAFAMARASAYAZBABEBGBHBIBNBOBRCACOCSCYDZELEOETEUFAFIFJFOFYGAGDGLGNGUHAHIHRHUHYIAIE AfarAbkhazianAfrikaansAmeharicArabicAssameseAymaraAzerbaijaniBashkirByelorussianBulgarianBihariBislamaBengali, BanglaTibetanBretonCatalanCorsicanCz...
Page 53 - More about this receiver
53 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Selecting the sources • When no disc is loaded in the receiver, “DISC” cannot be selected. • Without connecting to the CD changer or DAB tuner, “CD-CH” or “...
Page 54 - Playing an MP3/WMA disc
54 ENGLISH Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower) recorded in either CD-R/CD-RW or in DVD-R/DVD-RW. • This receiver can show the names of albums, artists (performer), and ID3...
Page 55 - Changing the source
55 ENGLISH To be continued.... • This receiver can recognize the total of 1100 files, 250 folders (maximum of 999 files per folder). • This receiver can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the ...
Page 56 - On-screen guide icons; General settings—PSM
56 ENGLISH On-screen guide icons During play, the following guide icons may appear for a while on the monitor. : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-audio languages (for DVD only). : Appears at...
Page 57 - About sounds reproduced through the rear terminals; Output signals through the DIGITAL OUT terminal
57 ENGLISH About sounds reproduced through the rear terminals • Through the analog terminals (Speaker out/LINE OUT/2nd AUDIO OUT): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO—DOWN MIX: see page 31.) • Through DIGITAL OUT (optica...
Page 58 - Troubleshooting; Symptoms
58 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connectio...
Page 61 - Specifications; AUDIO AMPLIFIER SECTION
61 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 00...
Page 62 - Having TROUBLE with operation?; Please reset your unit; Refer to page of How to reset your unit; Haben Sie PROBLEME mit dem Betrieb?; Bitte setzen Sie Ihr Gerät zurück; Siehe Seite Zurücksetzen des Geräts; Vous avez des PROBLÈMES de; Réinitialisez votre appareil; Hebt u PROBLEMEN met de bediening?; Stel het apparaat terug; Zie de pagina met de paragraaf Het apparaat terugstellen
© 2005 Victor Company of Japan, Limited EN, GE, FR, NL 0805DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fon...
Page 64 - Removing the receiver
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits.• If you are not sure how to install this receiver correct...
