Page 4 - NOTE: Be sure the window is seated; TAB; INSTALLATION INSTRUCTIONS
Your fan comes fully assembled and ready for installation. Casement and slidingwindows require a mounting bracket for installation which can be found in thehardware packet provided. Your fan has been designed to fit double hung, casement or sliding windows withminimum openings of 23” wide x 12” high...
Page 5 - NOTE: Since the mounting
• Remove the four “shoulder screws” supplied from the hardware packet. • Screw two of the four shoulder screws into the holes on the bottom back of the fan and two into the holes on the bottom front of the fan. • Remove the mounting bracket from the kit provided. • Temporarily hook the mounting brac...
Page 6 - • Set the fan to either the FRESH AIR or EXHAUST; NOTE: Do not switch the; • Adjust the SPEED control of each fan to either SUPER, HIGH or LOW.; OPERATION; • Turn fan off and unplug the fan before cleaning.; CLEANING AND STORAGE
• Plug the fan into a polarized 120 Volt AC wall outlet.• Turn the Thermostat Control to its highest setting (fully clockwise). • Set the fan to either the FRESH AIR or EXHAUST mode by moving the FRESH AIR/EXHAUST switch upor down (Fig. 6). The FRESH AIR setting draws in airfrom the outside. The EXH...
Page 7 - Mounting Bracket and Hardware Kit; Please be sure to specify model number.
Item Part No. Price Mounting Bracket and Hardware Kit DW-628-1 $5.00 US/$7.50 CAN Alternate Bracket (casement windows only) DW-628-2 No Charge To order parts send your request to Honeywell Consumer Relations. Be sure toinclude your fan model number, part no. and quantity desired. Make your checkor m...
Page 9 - GUIDE D’UTILISATION; TWINDOW; VENTILATEUR DE FENÊTRE DOUBLE
GUIDE D’UTILISATION T E M P E R A T U R E C O N T R O L LOW HIGH • • • • SUPER HIGH OFF LOW FRESH AIR EXHAUST • • • • SUPER HIGH OFF LOW FRESH AIR EXHAUST S P E E D S P E E D TWINDOW MC VENTILATEUR DE FENÊTRE DOUBLE Modèle HW-628 HW-628 OM_fre 10/01/01 2:07 PM Page 1
Page 11 - Ce produit est destiné; UNIQUEMENT; Afin de prévenir tout choc électrique,; PAS; immerger l’unité, la fiche ou le; NE PAS TENTER; de contourner ce dispositif de sécurité.; OFF
IMPORTANTES CONSIGNES DE SÉCURITÉ LIRE ET CONSERVER CES CONSIGNES DESÉCURITÉ AVANT D’UTILISER CE VENTILATEUR LIRE ET CONSERVER CES CONSIGNES DESÉCURITÉ AVANT D’UTILISER CE VENTILATEUR. 1. Utiliser ce ventilateur en suivant lesdescriptions du présent guide. Tout autreusage non recommandé peut provoqu...
Page 12 - DIRECTIVES D’INSTALLATION
Le ventilateur est livré complètement assemblé et prêt à installer. Les fenêtres à battantsou coulissantes requièrent l’usage d’un support de fixation pour l’installation, se trouvant dans le paquet de visserie fourni. Le ventilateur est conçu pour s’adapter aux fenêtres à battants ou coulissantes à...
Page 13 - FENÊTRES À BATTANTS OU COULISSANTES
VIS SUPPORT Fig. 3 CADRE DE FENÊTRE VIS À BOIS Fig. 4 SUPPORT Fig. 5 FENÊTRES À BATTANTS OU COULISSANTES • Retirer les quatre « vis à épaulement » fournies dans le paquet de visserie.• Visser deux des quatre vis à épaulement dans les orifices situés sous le ventilateur et à l’arrière et les deux aut...
Page 14 - • Régler le ventilateur soit sur le mode FRESH AIR (arrivée; REMARQUE : Ne pas permuter; la direction du débit d’air.; FONCTIONNEMENT
• Brancher le ventilateur dans une prise murale polarisée de 120 V c.a.• Régler la commande du thermostat au niveau le plus élevé (tourner à fond dans le sens horaire). • Régler le ventilateur soit sur le mode FRESH AIR (arrivée d’air frais) soit sur EXHAUST (évacuation d’air) en levantou en abaissa...
Page 15 - Support de fixation et trousse de visserie; REMARQUE : Honeywell ne peut rien expédier aux boîtes postales.; Adresser questions ou commentaires à :; N’oubliez pas de préciser le numéro du modèle.
Article N° de réf. Prix Support de fixation et trousse de visserie DW-628-1 5,00 $ US/7,50 $ can. Support alternatif DW-628-2 Gratuit (fenêtres à battants uniquement) Pour toute commande de pièces, envoyez votre requête au service des relations avec les consommateurs d’Honeywell (Honeywell Consumer ...
Page 16 - GARANTIE LIMITÉE DE 5 ANS; . Cette garantie limitée de
© 2001 Tous droits réservés. Honeywell.N° de réf. : 035-02389-000 Rév. 0Maquette : 043-50211-000 09/01 GARANTIE LIMITÉE DE 5 ANS Lire tout d’abord toutes les instructions avant de tenter d’utiliser ce produit. La carte-réponse ci-jointedoit être remplie etretournée dans les 10 jours suivant l’achat....
Page 17 - MANUAL DEL USUARIO; TWINDOWTM
MANUAL DEL USUARIO T E M P E R A T U R E C O N T R O L LOW HIGH • • • • SUPER HIGH OFF LOW FRESH AIR EXHAUST • • • • SUPER HIGH OFF LOW FRESH AIR EXHAUST S P E E D S P E E D TWINDOW™ VENTILADOR DOBLE PARA VENTANA Modelo HW-628 HW-628 OM_spa 10/01/01 2:08 PM Page 1
Page 19 - SOLAMENTE; y no para uso; NO TRATE; anular la característica de seguridad.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD LEA ESTAS INSTRUCCIONES DE SEGURIDADANTES DE USAR EL VENTILADOR Y GUÁRDELAS CUANDO USE ARTEFACTOS ELÉCTRICOS,SIGA SIEMPRE LAS PRECAUCIONESBÁSICAS PARA DISMINUIR EL RIESGO DEINCENDIO, CHOQUE ELÉCTRICO YLESIONES A LAS PERSONAS, INCLUYENDO: 1. Use este ventilador ...
Page 20 - quede completamente bloqueado.; LENGÜETA; INSTRUCCIONES DE INSTALACIÓN
Su ventilador viene completamente armado y listo para instalar. Las ventanas con bisagras y las corredizas necesitan un soporte de montaje para la instalación quepodrá encontrar en el paquete de piezas que viene incluido. Su ventilador ha sido diseñado para ajustarse a ventanas de guillotina, con bi...
Page 21 - VENTANAS CON BISAGRAS O CORREDIZAS
TORNILLOS SOPORTE Fig. 3 MARCO DE LA VENTANA TORNILLOS PARA MADERA Fig. 4 SOPORTE Fig. 5 VENTANAS CON BISAGRAS O CORREDIZAS • Saque del paquete de piezas los cuatro “tornillos de sujeción”.• Atornille dos de los cuatro tornillos de sujeción en los orificios de la parte inferior trasera del ventilado...
Page 22 - • Ajuste el ventilador en el modo FRESH AIR (AIRE PURO); FUNCIONAMIENTO
• Enchufe el ventilador en un tomacorriente de pared polarizado de 120 voltios de CA.• Gire el control del termostato a la graduación más alta (giro completo en sentido horario). • Ajuste el ventilador en el modo FRESH AIR (AIRE PURO) o EXHAUST (EXTRACCIÓN) moviendo el interruptorFRESH AIR/EXHAUST h...
Page 23 - Soporte de montaje y kit de ferretería; Por favor asegúrese de especificar el número del modelo.
Artículo Pieza No. Precio Soporte de montaje y kit de ferretería DW-628-1 $5.00 USD/$7.50 CAN Soporte alternativo DW-628-2 Sin cargo (sólo para ventanas con bisagras) Para solicitar piezas, envíe su pedido a Honeywell Consumer Relations. Asegúrese de incluir el número del modelo de su ventilador, el...