Honeywell CLOUD LINK 4G MODEM - Manual
Honeywell CLOUD LINK 4G MODEM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CNI4 Quick Start Guide; Introduction
- Page 3 – Step 2: Power-up the CNI4 - battery or external power supply
- Page 4 – To setup external power supply
- Page 5 – Link 4G Modem; Disconnect the RS232
- Page 7 – Step 6: Configure the Cloud Link 4G Modem
- Page 8 – MiWireless
CNI4
CNI4 Quick Start Guide
FD-601 | Version 1 | September 2017
Honeywell Process Solutions | Mercury Instruments
512 Virginia Drive Ft. Washington PA 19034 USA
855 251-7065
–
United States & Canada | 302 669-4253
–
Outside the United States
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell CLOUD LINK 4G MODEM
Summary
CNI4 Quick Start Guide 2 Introduction The CNI4 has two components: The Pulse Accumulator and the Cloud Link 4G Modem. This Quick Start Guide provides instructions for using the MasterLink Software (R510.1 or higher) to configure the Pulse Accumulator and the Cloud Link 4G Modem as two independent si...
CNI4 Quick Start Guide 3 Step 2: Power-up the CNI4 - battery or external power supply To connect the battery packs to the Cloud Link 4G Modem 1. Install the Cloud Link battery packs with positive terminal on top. 2. Tie wrap the batteries to the metal plate. 3. Connect the female connector from the ...
CNI4 Quick Start Guide 4 To setup external power supply 1. Remove the housing of the cable gland and route the power cable through it. 2. Connect the power cable to the 3-pin power connector on the Pulse Accumulator board. 3. Connect the other end of the power cable to an external power source (5V t...
