Honeywell CLOUD LINK 4G MODEM - Manuals

CNI4 Quick Start Guide 5 Step 4: Disconnect the serial cable interface connecting the Pulse Accumulator and the Cloud Link 4G Modem Step 5: Configure the Pulse Accumulator 1. Insert the male connector of the Pulse Accumulator into the female connector of the USB-to-serial cable. 2. Connect the USB e...

CNI4 Quick Start Guide 7 Step 6: Configure the Cloud Link 4G Modem 1. Disconnect the female connector of the USB-to-serial cable that was previously connected to the Pulse Accumulator. 2. Insert the male connector, so far unused, of the USB-to-serial cable into the female RS232 connector slot on the...

CNI4 Quick Start Guide 8 6. Navigate to View/Edit > Configure by Group > Radio Configuration, and set the following parameters. Item No. Description Verizon Non-Verizon 3071 Verizon enable 1 = Enable 0 = Disable 3016 Fetch Radio Parameters 1 = Set 1 = Set 3021 ModemIPType 2 = IPv4v6 0 = IPv4 3...

3 Mechanical Assembly This chapter describes the mechanical assembly of the different components of a Cloud Link 4G Modem. C H A P T E R 3

3.1 Device Dimensions The figure below illustrates the dimensions of a Cloud Link 4G Modem device. (All dimenstions are in mm) 3 Mechanical Assembly3.1   Device Dimensions Honeywell 2016 12

3 Mechanical Assembly 3.4   Installation Drawing Honeywell 2016 17 3.4 Installation Drawing

3.5 Field Installation Cloud Link 4G Modem can be installed in an EC 350 Electronic Volume Corrector device using a mount- ing bracket as shown in the figure below. Position the 2 tabs of the Cloud Link 4G Modem case in the mounting bracket and use 6-32 screws to fix the device with the mounting bra...

4 Electrical Assembly This chapter describes assembly of the different electrical components of a Cloud Link 4G Modem. C H A P T E R 4

4.1 Power Supply options Voltage Range Type 3.0V to 3.6V (Li-SOCI2) D-Cell + HLC (For pulse power) 4.8V to 30V 1. External Power supply (Ex: Solar power) 2. Alkaline Battery pack with external super capacitor. Humidity: Max 95% rH, non-condensing Peak current during transmission 3A @ 3.8V Duty cycle...

4.4 Antenna Interface Connector Specs: MPN: 73251-1150 MFR: Molex Description: Edge Mounted SMA connector Recommended Antenna: HPN: 51508416-100 Description: Octa-Band LTE Antenna (Bands 700/750/850/900/1800/1900/2100/2700 MHz) 4 Electrical Assembly4.4   Antenna Interface Honeywell 2016 28

4 Electrical Assembly 4.5   Magnetic REED Switch Honeywell 2016 29 4.5 Magnetic REED Switch Magnetic Reed Switch in Cloud Link 4G Modem enables field technician to swipe a hand-held magnet near Reed switch in order to initiate a call.

5 Configuring Cloud Link 4G Modem This chapter describes the configuration of a Cloud Link 4G Modem device using the MasterLink iOS application. C H A P T E R 5

5 Configuring Cloud Link 4G Modem 5.2   Getting started with MasterLink iOS application Honeywell 2016 39 5.2 Getting started with MasterLink iOS application MasterLink iOS application is available on the iStore. For more information on installing and getting star- ted with the MasterLink iOS applic...

5 Configuring Cloud Link 4G Modem 5.3   Bluetooth Pairing with MasterLink iOS application Honeywell 2016 43 5.3 Bluetooth Pairing with MasterLink iOS application Every Cloud Link 4G Modem device has a unique IMEI and RUID numbers. It is recommended to keep a note of these numbers as they can be used...

5.5 Device Configuration Over Bluetooth Note: Configuration changes take effect immediately. 5.5.1 Configuration by Group 1. Tap Config 2. Tap Config by Group 3. Select an item group 4. Configure the item values 5 Configuring Cloud Link 4G Modem5.5   Device Configuration Over Bluetooth Honeywell 201...

Honeywell | 2 1 About MasterLink Perform Database Administrative tasks such as CSD (Comma Separated Data) Conversion Import/Export instrument data Import/Export site data Perform instrument and modem firmware updates Capture live data and plot graphs Plot graph over Audit Trail data Perform role bas...

1.3 Supported Device Functionality *CL = Cloud Link 4G Modem, PA = Pulse Accumulator, TC = Turbo Corrector, EC 350 CL EC 350 + CL PA CNI4 Mini Max ERX TCI Mini- AT TC Ac Cutest ER X 350 ERX 350 + CL Mini Turbo Mon PT Mod- bus ER ECAT Item Report ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Audit Report ü û ü...

1.4 Supported File formats and extensions FILE FORMAT EXTENSION Item File Item Template File Firmware File User Table ShortList File Logging Con-figuration Audit Graphs Live Graph Setting Live Graph Values ShortListFile WithValue Certificate file EC 350 IE3 TE3 BIN UTE CE3 LC AGS LGS LGV KE3 Cloud L...

Honeywell | 6 2 Installation 2 Installation This chapter describes the installation of MasterLink software. 2.1 Interoperability with SuiteSQL MasterLink R510.1 can coexist with Suite SQL. New MasterLink R510.1 can be used with either SQL database Server or SQLite database. If a single data source i...

Honeywell | 7 2 Installation 2.2 MasterLink Installation with SQL Server Prerequisites: If you are using SQL Server, then a SQL Server instance must be installed before installingMasterLink. Administrative Privileges are required to install the application. To Install MasterLink Installation with SQ...

Honeywell | 17 2 Installation 2.3 Installing MasterLink with SQLite 1. Right-click Setup file and then click Run as administrator . The MasterLink - InstallShield Wizard appears. 2. Click Next. The License Agreement page appears.

Honeywell | 21 2 Installation 2.4 Post Installation Steps 1. To log on to MasterLink application, users need access to C:\Pro- gramData\Honeywell\Masterlink. By default, all users under Users group has the requiredprivileges. If a user falls under any other user group, then administrator should give...

Honeywell | 22 2 Installation 2.5 Upgrading MasterLink To upgrade MasterLink R510.1 from R500.1 to R510.1: 1. On the machine where MasterLink R510.1 R500.1 is installed, launch the MasterLink R510.1 R510.1 installer. The following pop-up appears. 2. Click OK. The installation wizard continues with t...

Honeywell | 23 3 MasterLink User Interface 3 MasterLink User Interface This chapter describes the steps of getting started with MasterLink. This chapter also explains theuser interface along with the different features that are available in separate tabs. 3.1 Getting Started On launching the MasterL...

Honeywell | 118 4 Update 4.3 Upload Cloud Link Modem Certificates This tab is enabled if application is connected to EC 350 MasterLink R510.1 or integrated EC 350. To enable SSL communication, Security Enable check box under certificate tab must be checked.Then upload a valid security certificate to...

Honeywell | 120 4 Update 4.4 Legacy Devices Firmware Upgrades Mercury Instruments legacy devices include: 1. Accutest 2. CNI4 3. ECAT 4. ER 5. ERX 6. Mini 7. Mini-AT 8. Mini-Max 9. PTModbus 10. Pulse Accumulator 11. TCI 12. Turbo Corrector 13. Turbo Monitor For Mercury Instruments legacy devices, yo...

Honeywell | 125 6 Glossary 6 Glossary A Activity Log This function is used to quickly view the Activity Log on screen. Please note that this log is different from the Event Log because this log mainly focuses on software activity (and some firmware activity) where the Event Log function records acti...