Honeywell C7035- Manual
Honeywell C7035– Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – INSTALLATION
- Page 5 – WARNING
- Page 7 – Swivel Mount
- Page 8 – CAUTION
- Page 9 – Connecting Detectors In Parallel; ADJUSTMENTS AND CHECKOUT; Uv Sensor Tube Test
- Page 10 – Pilot Turndown Test
- Page 11 – Final Checkout
- Page 12 – TROUBLESHOOTING; Inadequate Flame Signal; MAINTENANCE; Periodic Maintenance
PRODUCT DATA
60- 2026- 11
® U.S. Registered Trademark
Copyright © 2001 Honeywell • All Rights Reserved
C7027A, C7035, C7044A, C7927A
Minipeeper® Ultraviolet Flame Detectors
APPLICATION
The C7027A, C7035A, C7044A and C7927A Minipeeper®
Ultraviolet Flame Detectors detect the ultraviolet radiation
emitted by combustion flames. The flame detectors are used
with Honeywell flame safeguard controls to provide flame
supervision for gas, oil, or combination gas-oil burners.
FEATURES
• C7027A, C7035A, and C7044A Flame Detectors are
used with RA890G devices or R7249A, R7290A,
R7749B and R7849A,B Amplifiers and the appropriate
Honeywell controls.
• C7044A may also be used with the following 50 Hz
Honeywell combustion controls/amplifiers:
— R4341/R7323
— R4343/R7323
— R4344/R7323
• C7027A has an integral collar threaded (internal
1/2-14 NPSM) for mounting on a one-half-inch sight
pipe.
• C7035A has an integral collar threaded (internal
1-11-1/2 NPSM) for mounting on a one-inch sight pipe.
• C7035A housing meets Underwriters Laboratories Inc.
requirements for rain tightness and complies with
NEMA enclosure standards, types 4 and 4X.
• C7044A mounts with a two screw bracket. The UV
sensor tube is enclosed in a stainless steel housing.
• C7044A has the capability of side or end viewing in
flame monitoring applications.
• Because of their compact size, the C7027A and
C7044A are particularly suitable for blast tube
mounting.
• Properly installed, the C7027A, C7035A and C7927 are
pressure rated for 5 psi.
• C7035A ultraviolet radiation sensor tube is field
replaceable.
• Two C7027A, C7035A or C7044A Flame Detectors can
be wired in parallel for difficult flame sighting
installations.
• C7927A is used with only the R7851B Flame Amplifier
and the 7800 SERIES controls.
• C7927A has an integral collar threaded (internal
1/2-14 NPSM) for mounting on a one-half inch sight
pipe.
C7027A
C7035A
C7044A
C7927A
Contents
Application ........................................................................
Features ...........................................................................
Specifications ...................................................................
Ordering Information ........................................................
Wiring (All Models—Fig. 10) .............................................
Adjustments and Checkout ..............................................
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell C7035
Summary
C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 60-2026—11 4 Fig. 4. Installation dimensions of C7927A1016 (U.S.A. version) and C7927A1008 (European version) in in. (mm). INSTALLATION When Installing This Product... 1. Read these instructions carefully. Failure to follow them c...
C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 5 60-2026—11 WARNING Explosion Hazard and Electrical Shock Hazard. Can cause serious injury, death or property damage. 1. The C7027A, C7035A , C7044A and C7927 Flame Detectors must be used with Honeywell flame safeguard controls (...
C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 7 60-2026—11 Swivel Mount To facilitate proper sighting of the flame, a swivel mount (part no. 118367A) is available. The swivel mount will require a 3/4 to 1/2 in. reducer and a 1/2 in. close nipple to mount a C7027A, or a 1 in. ...
