Honeywell C7035- Manuals

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 60-2026—11 8 Fig. 8. Mounting C7044A Detector on blast tube. The C7044 is mounted in a 29/32 in. (23.0 mm) hole in the blast tube. The mounting bracket is fastened to the blast tube with 2 screws on 1-27/64 in. (36.1 mm) centers. ...

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 9 60-2026—11 g. The scanner wires should remain separated a minimum of two in. (51 mm) from other line voltage wires in the main control panel to the flame safeguard device. 3. Avoid installation considerations that can influence ...

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 60-2026—11 10 Fig. 10. Measuring microamp flame signal. The R7749B and R7849A,B Amplifiers used with the Honeywell BCS 7700 and 7800 SERIES controls, respectively, have a dc voltage flame signal output. For the R7749B Amplifier, a...

11 60-2026—11 a Currently obsolete. Ignition Spark Response Test Test to be sure that ignition spark is not actuating the flame relay (usually 2K) or flame LED in the flame safeguard control. 1. Close the pilot and main burner manual fuel shutoff valves. 2. Connect the appropriate meter to the flame...

60-2026—11 G.R. Rev. 07-01 www.honeywell.com/bbc Home and Building Control Home and Building Control Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, OntarioM1V 4Z9 Printed in U.S.A. on recycled paper containing at least 10%...

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 60-2026—11 8 Fig. 8. Mounting C7044A Detector on blast tube. The C7044 is mounted in a 29/32 in. (23.0 mm) hole in the blast tube. The mounting bracket is fastened to the blast tube with 2 screws on 1-27/64 in. (36.1 mm) centers. ...

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 9 60-2026—11 g. The scanner wires should remain separated a minimum of two in. (51 mm) from other line voltage wires in the main control panel to the flame safeguard device. 3. Avoid installation considerations that can influence ...

C7027A, C7035, C7044A, C7927A MINIPEEPER® ULTRAVIOLET FLAME DETECTORS 60-2026—11 10 Fig. 10. Measuring microamp flame signal. The R7749B and R7849A,B Amplifiers used with the Honeywell BCS 7700 and 7800 SERIES controls, respectively, have a dc voltage flame signal output. For the R7749B Amplifier, a...

11 60-2026—11 a Currently obsolete. Ignition Spark Response Test Test to be sure that ignition spark is not actuating the flame relay (usually 2K) or flame LED in the flame safeguard control. 1. Close the pilot and main burner manual fuel shutoff valves. 2. Connect the appropriate meter to the flame...

60-2026—11 G.R. Rev. 07-01 www.honeywell.com/bbc Home and Building Control Home and Building Control Honeywell Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, OntarioM1V 4Z9 Printed in U.S.A. on recycled paper containing at least 10%...