Honeywell 2000 Series - Manual

Honeywell 2000 Series

Honeywell 2000 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 3 – GLISH; Programmable and Non-programmable Thermostats; This manual covers the following models:; non-programmable thermostats; Must be installed by a trained, experienced technician; can damage the product or cause a hazardous condition.
  • Page 4 – Separate the thermostat from the wallplate as per Figure 1.; Wallplate installation; CAUTION: ELECTRICAL HAZARD
  • Page 5 – Wiring
  • Page 6 – HG; Incorrect jumper setting; Reversing valve setting
  • Page 7 – Installer setup
  • Page 8 – • 24 VAC or 2 AAA batteries; Specifications
  • Page 9 – FRANÇAIS; Thermostats programmables et non programmables; Le présent guide porte sur les modèles suivants :; Thermostats non programmables; Lire attentivement les instructions. Le fait de ne pas les suivre
  • Page 10 – Séparer le thermostat de la plaque murale selon la figure 1.; Installation de la plaque murale; MISE EN GARDE : RISQUE DE CHOC ÉLECTRIQUE
  • Page 11 – Câblage
  • Page 12 – Si le réglage est incorrect; facultatives; Réglage de la valve d’inversion
  • Page 13 – Configuration par l’installateur
  • Page 14 – Fiche technique
  • Page 15 – Termostatos programables y no programables; Este manual incluye los siguientes modelos:; Termostatos no programables; puede ocasionarse una situación de peligro.; ¿Necesidad de asistencia?
  • Page 16 – ESP; Conectar los cables con los terminales.; Instalación de la placa mural; ADVERTENCIA: PELIGRO DE ELECTROCUCIÓN
  • Page 17 – Cableado
  • Page 18 – Ajuste de la válvula de inversión
  • Page 19 – Configuración por parte del instalador
  • Page 20 – Especificaciones técnicas
  • Page 22 – Sistemas para automatización y control
Loading the manual

Série

PRO 1000 / 2000

Series

Programmable and Non-programmable Thermostats
Thermostats programmables et non programmables

Termostatos programables y no programables

Installation Manual
Guide d’installation

Guía de instalación

400-626-000-D (69-1968EFS-03 TH1000D_TH2000D installation manual).book Page 1 Thursday, April 16, 2009 3:31 PM

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - GLISH; Programmable and Non-programmable Thermostats; This manual covers the following models:; non-programmable thermostats; Must be installed by a trained, experienced technician; can damage the product or cause a hazardous condition.

1 EN GLISH / PRO 1000 / 2000 Series Programmable and Non-programmable Thermostats This manual covers the following models: System Types TH1100D, TH1110D and TH1210D non-programmable thermostats TH2110D and TH2210D programmable thermostats (Remove the thermostat from its wallplate to find the model n...

Page 4 - Separate the thermostat from the wallplate as per Figure 1.; Wallplate installation; CAUTION: ELECTRICAL HAZARD

Installation Guide 2 EN GLISH n Loosen the locking screw at the bottom of the thermostat. Note that the screw is captive and cannot be removed from the wallplate. o Separate the thermostat from the wallplate as per Figure 1. p Position the wallplate against the wall and mark hole positions with a pe...

Page 5 - Wiring

PRO 1000 / 2000 Series 3 EN GLISH Gas, oil or electric heating (1H) Gas, oil or electric heating and/or air conditioning (1H / 1C / 1H1C) Heat pump without auxiliary heating (1H1C) Heat pump with auxiliary heating (2H1C) Wiring Power supply. Provide disconnect means and overload protection as requir...

Other Honeywell Models