Honeywell 1104 - User Manual
Honeywell 1104 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Parameter
- Page 3 – Mounting Considerations
- Page 4 – locate the 4 countersink posts
- Page 5 – Input/Output Connections; Headers; : The B578 contains the following headers:; Output Function; LED; Power Supplies; Mode; Locally powered B578
- Page 6 – IEEE Class; FCC Statement; This Class B Digital Apparatus complies with Candian ICES-003; Ordering Information; Housing Configuration
- Page 7 – SAP VC Configuration Material Name; Housing Configuration Option; This character set defines the software configuration of B57x.
- Page 8 – Logic Board Type
1
Copyright 2014 INNCOM by Honeywell
INNCOM B578 Datasheet
Overview
INNCOM
’s multifunctional controller works in three configurations to facilitate different
Integrated Room Automation System (IRAS) operations:
As the B578S Edge Router, it networks Ethernet to
INNCOM’s Deep Mesh RF
network. It provides backhaul networks with up to 200* rooms per PAN ID. It
supports multiple IP protocols (UDP, ICMP). The expanded addressing facilitates
transport reliability and multicasting. The Edge Router enhances security and
offers RF-to-Ethernet protocol conversion, with the availability of a PoE power supply for Power over Ethernet
applications.
As the B578N, the Edge Router interfaces with the Tridium Niagara JACE (Java Application Control Engine)
controller to provide connectivity to numerous common network protocols such as LonWorks and BACNet, as
well as proprietary networks.
As the PC-803, the device acts as a protocol converter, converting in-room RF traffic to Ethernet towards the
server.
Note:
The device will generally be referred to as the “B578” throughout this
document. Statements specific to a particular configuration will be noted
accordingly.
Features
Supports CBL32 control algorithms
RS485 System Interface dongle
10MBit Ethernet
Available in PoE and +12VDC powered models
128 bit AES encryption (Ethernet link and RF network)
Typical indoor RF range up to 100ft
Supports 2.4Ghz IEEE 802.15.4 compliant RF transceiver
Supports S5bus (through external adapter)
Compact physical dimension
DIN rail mounting option (Figure 1)
Wall or ceiling mount on standard 2-gang ring (Figure 2)
Supports up to 200 rooms depending on the guestroom application deployed and the selected RF environment
at the site.
4 kBytes mailbox memory usable as a relay-buffer for battery operated devices (Edge Router)
IPv6 support (Edge Router)
*
The 200 device limit is based on timing considerations used by the communication protocols of a Deep Mesh network. Local RF i nterference
sources, conditions, and device placement can decrease this number.
Figure 2 B578 Wall/Ceiling Mountable
Figure 1 B578 DIN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Honeywell 1104
Summary
2 Copyright 2014 INNCOM by Honeywell Specifications Parameter B578 RF Data Rate 250kbps Indoor/Urban RF range 100ft RF Transmit Power 50mW (+17dBm) RF Receive Sensitivity -97.7dBm Frequency Band 2.4Ghz Encryption AES-128 Protocol 802.15.4 Frequency Channels 11 –26 Network Topology Mesh Maximum devic...
3 Copyright 2014 INNCOM by Honeywell Mounting Considerations The B578 Network Controllers are designed for mounting in a variety of applications. The bottom housing is equipped with a channel and tab for DIN rail mounting and therefore does not require any additional screws or hardware for installat...
4 Copyright 2014 INNCOM by Honeywell Figure 4 Top Housing Removal To gain access to headers and connectors located on the PCBA, remove the B578 from the DIN rail or NEMA box enclosure. Using a flat screw driver, lift the top housing away from the snap tangs on the bottom housing. Figure 5 Mounting S...
