Honeywell 700 - Manual
Honeywell 700 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Processer
- Page 3 – APPROVALS; Signal Processor Mounting; WARNING; Signal Processor Power
- Page 6 – Viewing Head Connector and Wiring
- Page 7 – Cable Preparation
- Page 8 – Protecting the Viewing Head Cable; Viewing Head Mounting Block
- Page 9 – Vibration; ACCESSORIES; Cable and Connectors - S70X/S80X Viewing Heads
- Page 10 – Fiber Optic System Compatibility -; OPERATION; IR Detector; Filter Selection for IR Viewing Head; UV Detector
- Page 11 – Adjustment of VH Sighting and Gain; NOTE: Adjustment to the viewing head parameters; Orificing; Front Panel LED Indicators and Display; • Two digit display; Push Button Functions; • RELAY ON SETPOINT button:
- Page 12 – • LOAD FACTORY DEFAULTS button:; Manual Setup of Setpoints; Relay On Setpoint
- Page 13 – Setting FFRT (Flame Failure Response; Automatic Setup of Setpoints
- Page 14 – Panel Lock; MODBUS COMMUNICATION; Communication Setting
- Page 15 – Modbus RTU Function Supported; Register
- Page 16 – Fig. 7. Typical Communication Wiring and Recommended Addressing.
- Page 17 – TROUBLESHOOTING; Lockout or Faulty VH Indication; MAINTENANCE
- Page 21 – Mounting Examples
- Page 23 – Fig. 17. Opposed Fired Viewing Head Sighting
- Page 33 – SAFETY MANUAL: 700 SIGNAL PROCESSOR; Safety Function of the 700
- Page 34 – Proof Test Interval; on the proof test interval for 700AC.; on the proof test interval for 700DC.
- Page 35 – 00AC or 700DC Signal Processor Proof Test Procedure; Equipment; Product Decommissioning
- Page 36 – Product Declaration
- Page 37 – S70X and S80X Viewing Head Proof; S70X and S80X Viewing Head Proof Test Procedure
- Page 40 – Automation and Control Solutions
USER MANUAL
Put Bar Code Here
66-2069-02
Honeywell Model 700/800 Signal
Processor and Viewing Head
APPLICATION
The Honeywell Model 700ACSP and Model 700DCSP signal
processors are single-channel, fail safe, flame monitoring
systems when used In conjunction with the S70X/S80X
viewing heads. They offer easy setup, excellent discrimination,
and high reliability.
FEATURES
Viewing heads are interchangeable between the two signal
processor models. Any viewing head in the two families will
work with any of the signal processors.
Two signal processor models are available:
• Model 700ACSP Universal 85-265 VAC powered, plus
24VDC backup.
• Model 700DCSP 22-26VDC powered, plus 24VDC
backup.
The two Model 700 signal processors are similar, with 12
push-buttons, a two-digit numeric display, and four LED status
indicators for operator interface. The only difference between
the two is that one accepts AC power and the other accepts
DC power. Both models also accept 24VDC backup power.
Most of the signal processor connections are made through
Phoenix plug-in connectors. Communication connections are
made through modular phone jacks located at the top of the
Both signal processor models mount on a standard 35 mm
DIN rail. They snap into place and may be released from the
rail using a flat screwdriver.
There are two types of viewing heads—IR/flicker-sensitive and
UV-sensitive—with various features offered resulting in ten
different models. See Table 1 on page 2 for details.
The S702 and S706 viewing head housings are larger in
diameter than the S80X series, are made of aluminum, and
are secured with over-center latches to their mounting blocks
(Fig. 9). In contrast, the S802 and S806 viewing head
housings are smaller in diameter and are made of stainless
steel (Fig. 10). An 800 series viewing head is secured in its
mounting block by a friction twist-lock.
The IR/flicker sensitive viewing heads have a high-pass filter
that passes flicker frequencies above 33 Hz. Some models
have a built-in high pass filter that only passes frequencies
above 155 Hz. The high frequency filter models are identified
by adding “HF” to the model number. The UV models respond
to the level of UV radiation—not UV flicker—so there is no
filter option.
Contents
Application .......................................................................
Features ...........................................................................
Specifications ...................................................................
Approvals .........................................................................
Installation ........................................................................
Operation ......................................................................... 10
Modbus Communication .................................................. 14
Troubleshooting ................................................................ 17
Maintenance .................................................................... 17
Safety Manual: 700 Signal Processor .............................. 33
Safety Manual: S70X & 80X Viewing Head ..................... 36
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD 66-2069—02 2 1. All models include Electronic self-check. 2. Flicker Frequency filter settings available for IR sensor models. 3. Gain Selection available through Signal Processor. The viewing heads, the viewing head connector, and the cable ...
HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD 3 66-2069—02 APPROVALS S70X/S80X Viewing Heads (Connector series and Pipe fit series [PF]) CSA for CLASS I, DIV 2, GROUPS A, B, C, D & T4A FM 7610/NEMA 4X and CLASS 1, DIV 2, GROUPS A, B, C, D & T4A* SIL 3 “Fit for Use” IECEx CSA 10.0...
HONEYWELL MODEL 700/800 SIGNAL PROCESSOR AND VIEWING HEAD 66-2069—02 6 Viewing Head Connector and Wiring Viewing heads are wired to the appropriate terminals located on bottom of the 700ACSP, 700DCSP, P531 or P532 signal processors. The terminals are listed functionally in Table 2. Connectors and ca...
