Grizzly Industrial G1037Z - User Manual

WARNING Some dust created by power sanding, sawing, grind-ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline...

Table Of Contents SECTION 1: SAFETY .................................................................................................................................3 Safety Instructions For Power Tools ....................................................................................................

G1037Z 13" Planer/Moulder -3- 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. NEVER FORCE TOOL. It will do the job better and safer at the ...

G1037Z 13" Planer/Moulder -5- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious per-...

-6- G1037Z 13" Planer/Moulder We are proud to offer the Model G1037Z 13" Planer/Moulder. This machine is part of a growing Grizzly family of fine woodworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation a...

G1037Z 13" Planer/Moulder -7- The Model G1037Z features a 110V/220V motor that is prewired at 110V. Amperage Draw110V (prewired) .................................... 18 Amps220V ....................................................... 9 Amps Use the following guidelines when choosing a circuit br...

-8- G1037Z 13" Planer/Moulder Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded. Because of the high amperage draw from this machine, we do not recommend the use of exten...

G1037Z 13" Planer/Moulder -9- Figure 3. Machine features. Power Switch V-Belt Cover Dust Hood Motor Moulding Fences Height Handwheel Thickness Scale Gear Box Work Table: The wood moves through the plan- er/moulder on the work table. Infeed and Outfeed Rollers: Powered rollers that move the wood ...

G1037Z 13" Planer/Moulder -11- Figure 4. Stand parts. The following is an inventory of the loose parts for your new Model G1037Z Planer/Moulder. DESCRIPTION QTY A. Upper Side Brace ........................................ 2 B. Lower Side Brace ........................................ 2 C. Upper ...

-12- G1037Z 13" Planer/Moulder Hardware Recognition Chart

-14- Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery. Sharp edges on metal parts may cause personal injury. Examine the edges of all metal parts before handling. This section covers t...

-16- Components and Hardware Needed: Qty Planer/Moulder Unit ........................................... 1Assembled Stand .............................................. 1Cap Screw M8-1.25 x 20 ................................... 4Lock Washer 8mm ............................................ 4 Tools N...

-17- Components and Hardware Needed: Qty V-Belt ................................................................. 2 To check belt tension, push the V-belt at its mid-point with moderate finger pressure. You should be able to deflect each V-belt about 1 ⁄ 2 ". To install and tension the V-belt: 1...

-18- G1037Z 13" Planer/Moulder Figure 15. Installing handwheel. Components and Hardware Needed: Qty Handwheel ......................................................... 1Handwheel Handle ............................................ 1 Tools Needed:Screwdriver .........................................

G1037Z 13" Planer/Moulder -19- Starting the machine: 1. Read the entire instruction manual. 2. Make sure all tools and foreign objects have been removed from the machine. 3. Plug the machine into the power source. 4. Press the ON button. Make sure that your hand stays poised over the switch in c...

-20- G1037Z 13" Planer/Moulder Your safety is important! Please follow the warnings below during this entire section: Damage to your eyes, lungs, and ears could result from failure to wear safety glasses, a respirator, and hearing protec- tion while using this machine. Loose hair and clothing co...

G1037Z 13" Planer/Moulder -21- The depth of cut is controlled by the handwheel on top of the planer. Turning the handle clockwise raises the work table and turning it counterclock-wise lowers the work table. Depth-of-cut is read directly from the inch/millimeter scale located on the right-hand s...

-22- G1037Z 13" Planer/Moulder Thickness planing sizes material and creates a smooth surface parallel with the opposite side of the board. It does not remove twisting, warping, or cupping. If these conditions exist, joint the workpiece before using the planer. To perform thickness planing operat...

G1037Z 13" Planer/Moulder -23- Figure 18. Fence rod brackets Components and Hardware Needed: Qty Moulding Fence ................................................. 2Moulding Fence Guide Rod .............................. 1Bracket .............................................................. 2Lock...

-24- G1037Z 13" Planer/Moulder Components and Hardware Needed: Qty Moulding Knives (Not included) ....................... 3 Tools Needed:Hex Wrench 4mm ............................................. 1Drift .................................................................. 1“L” Gauge ................

-26- To perform moulding operations: 1. Plane stock to within 1 ⁄ 16 " of the final thick- ness. Cut the width to within 1 ⁄ 8 " of the final profile if both edges are trimmed by the knives. Cut to the final width if only the face is profiled. 2. Align the fence rails with the edges of the p...

G1037Z 13" Planer/Moulder -27- Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury. Regular periodic maintenance on the Model G1037Z will ensure optimum performance. Make a habit of inspecting the machine each time you ...

-28- G1037Z 13" Planer/Moulder Since all bearings are sealed and permanently lubricated, simply leave them alone until they need to be replaced. DO NOT lubricate them. The following is a list of features and parts that need lubrication: Columns—The four columns should be lubricat-ed with light m...

-30- G1037Z 13" Planer/Moulder Maintenance Performed Approximate Hours Of Use Date Maintenance Notes

G1037Z 13" Planer/Moulder -31- Always disconnect power to the machine before performing service adjustments. Failure to do this may result in seri- ous personal injury. This section is designed to help the operator with adjustments that were made at the factory and that might also need to be mad...

-32- G1037Z 13" Planer/Moulder 5. The variation between one side and the other should not be greater than 0.004". Repeat steps 1-4 on the other two knives. Again, the variation between all three knives should not be greater than 0.004". Once you have completed inspection on all three kni...

G1037Z 13" Planer/Moulder -33- For the best results, have planer knives sharp-ened by a professional sharpening service which has the grinding and measurement equipment to assure that the knife cutting geometry is main-tained at optimum levels. Knife sharpening is a procedure that requires some ...

-34- G1037Z 13" Planer/Moulder Tools Needed:10/12mm Combo Wrench ................................. 1Hex Wrench 4mm .............................................. 1Drift ................................................................... 1Knife Setting Gauge .........................................

G1037Z 13" Planer/Moulder -35- If the infeed and outfeed rollers are not 0.08" below the cutterhead knife edge at bottom dead center, or if the rollers are not the same height on both sides, the roller height must be adjusted. To adjust roller height: 1. Slide the gauge block so it is under ...

-36- G1037Z 13" Planer/Moulder To be effective, the infeed and outfeed rollers must put pressure on the workpiece as it feeds through the planer/moulder. Too little pressure and the boards will not feed into the machine, too much pressure can overload the motor. Experiment with the best pressure...

G1037Z 13" Planer/Moulder -37- Mounting Bolts Dust Hood Bolts Chip Guide Wing Nuts Tools Needed:Combo Wrench 10/12mm ................................. 1 The chip deflector directs chips and dust into the dust hood and prevents chips from falling back into the planing area. It is an orange plasti...

-38- G1037Z 13" Planer/Moulder This section contains the following subsections for the Model G1037Z: aftermarket accessories, data sheets, parts diagrams and list, trouble-shooting, wiring diagrams, gauge block design, and warranty/return information. If you need parts or help in assembling your...

G1037Z 13" Planer/Moulder -39- To order any of the aftermarket accessories below, find the model number in bold and call our customer service line 24 hours a day at 1-800-523-4777. Moulding Knives— available from the current Grizzly catalog or online at grizzly.com. Replacement Knives— Model G45...

-40- G1037Z 13" Planer/Moulder Customer Service #: (570) 546-9663 • To GRIZZLY MODEL G1037Z 13" PLANER/MOULDER Design Type ..................................................................................................... Floor Model Overall Dimensions: Table Size ...........................

-44- G1037Z 13" Planer/Moulder SYMPTOM Motor will not start. Motor stalls or will not start; fuses or circuit breakers blow. Motor overheats. Machine slows when oper-ating. Loud, repetitious noise com-ing from machine Infeed roller marks are left on the workpiece. Outfeed roller marks are left o...

G1037Z 13" Planer/Moulder -45- Gauge Block Measurements

-46- G1037Z 13" Planer/Moulder Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations o...

G1037Z 13" Planer/Moulder -47- CUT ALONG DOTTED LINE ___Other__________________________________________________ 9. How many of your woodworking machines are Grizzly? _____________ 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinde...

Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website Today And Discover Why Grizzly ® Is The Industry Leader! Call Today For A FREE Full Color Catalog