Grizzly Industrial G0711 - Manual
Grizzly Industrial G0711 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Mounting; Lag Screw; Machine Base; Bolt; Figure 2. Mounted on G0712 optional stand.
- Page 5 – There are many different styles of; Installing an In-Line Lubricator
- Page 7 – Available Accessories from Grizzly; Figure 14. Mounted on G0712 optional stand.
Package Inventory
Foot Switch, Hose, and Hammer Assembly ..... 1
C-Frame ............................................................ 1
Hammer Head w/Coil Spring ............................. 1
Die
7
⁄
8
"-Shaft 1"-Radius ..................................... 1
Die
7
⁄
8
"-Shaft 2"-Radius ..................................... 1
Die
7
⁄
8
"-Shaft 3"-Radius ..................................... 1
Hex Wrench 4mm .............................................. 1
Hex Wrench 5mm .............................................. 1
Figure
1
. Model G0711 Planishing Hammer.
MODEL G0711
PLANISHING HAMMER
INSTRUCTION SHEET
This machine can cause
serious personal injury
if used incorrectly. To
reduce this risk, read
and understand these
instructions before using!
The Model G0711 has a maximum operating
pressure of 100 PSI. Exceeding this pres-
sure can lead to an explosion, which may
cause serious personal injury!
INJURY HAZARD!
Disconnect tool from air
supply whenever servicing
or adjusting machine!
EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection while
using this tool!
CRUSHING HAZARD!
Keep hands clear of ham-
mer at all times!
Specifications
Control Power ..................................... Pneumatic
Throat Depth ............................................... 19
5
⁄
8
"
Hammer/Die Opening (Usable) ...............
3
⁄
8
"–1
1
⁄
4
"
Maximum Opening (Loading/Unloading) .......... 4"
Maximum Workpiece Thickness .........
5
⁄
64
" (2mm)
Hammer Speed .......................... 875–1350 BPM
Operating Air Pressure ...................... 50-100 PSI
Maximum Air Pressure ........................... 100 PSI
Air Inlet Size, Consumption ........
1
⁄
4
" NPT, 4 CFM
Overall Dimensions ......... 23" L x 5
1
⁄
2
" W x 24" H
Weight ........................................................35 lbs
COPyRIGHT © AUGUST, 2010 By GRIzzLy INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY bE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MACHINES MFG. SINCE 7/10) #TR13227 PRINTED IN CHINA
NOTICE
If you have any questions about this
machine, please call or write us.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: [email protected]
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-3- Model G0711 (Mfg. Since 7/10) Mounting The Model G0711 can be mounted on the optional Model G0712 stand or a sturdy workbench. Optional Stand (G0712)Instructions for mounting the planishing ham-mer to this stand are provided with the stand. Follow those instructions, then continue with the Assem...
-5- Model G0711 (Mfg. Since 7/10) 5. Raise the die up close to the hammer by moving the die housing lever to the left. Figure 11. Raising the die up closer to the hammer using the die housing lever. 12. Test the operation of the planishing ham- mer by briefly pushing and releasing the foot switch. T...
-7- Model G0711 (Mfg. Since 7/10) Available Accessories from Grizzly G0712—Metal Stand for G0711Assembles in minutes and mounts directly to the planishing hammer. Like the C-frame on the pla-nishing hammer, the stand can be filled with sand to reduce vibration and noise. Figure 14. Mounted on G0712 ...
